Re: [6tisch] removing the 'e'

[Pat Kinney <[e-mail]>]

I disagree with both Kris' and Rene's objections.

Addressing Kris' objections first:
- If the roll-up from 15.4e to  15.4-2015 were just corrections of real problems it would be a no-brainer.
<PK> the element here is "just corrections", indeed there are corrections, but many non-TSCH and security corrections have been made as well
- Unfortunately, there are numerous cases where IEEE members with "good ideas" have pushed for changes that have little or no practical value, but do require a re-write of existing code, and mandate non-interoperability between the existing 15.4e and the forthcoming 15.4-2015.
<PK> '"good ideas" with little or no practical value' is a personal opinion, to which I disagree whole heartedly.'Requiring a rewrite of existing code and mandating non-interoperability between existing 15.4e and forthcoming 15.4-2015' is unfounded, the changes we have implemented have been critiqued for backward compatibility, I am not aware of any change that would make the two versions of devices non-interoperable. I ask that Kris quantify his statement with evidence.

Addressing Rene's objections:
- To me, it is not a given that the revision effort of 802.15.4 that is currently on its way will automatically satisfy requirements 6TiSCH has. 
<PK> to what TSCH requirements does Rene refer? I ask that Rene to not critique without giving evidence
- I am wondering how we would know, since so far technical changes have never been discussed/socialized within 6TiSCH itself (see also http://www.ietf.org/mail-archive/web/6tisch/current/msg02853.html). Anecdotal evidence regarding extensive changes makes me somewhat pessimistic here.
<PK> the url provided by Rene merely restates his objections in the past, they absolutely have no evidence supporting them, e.g. "this does not necessarily mean they can speak for 6tisch's interests, at least not without consensus." I ask Rene again, what 6tisch interests with a consensus have been ignored or disregarded? Please stop referring to past innuendos but instead let's discuss specific technical questions
- So, I am not in favor of implicit, blind trust; only in favor of explicit, verified trust. Unfortunately, this means I think the recommendation you put forward below is imprudent.
<PK> I addressed the aspect of "the explicit verified trust" at the meeting in Dallas, the latest draft revision will be made publicly available at the start of the Sponsor Ballot which could start as early as 8 April 2015. Until then, I ask that anyone in the 6tisch group to address specific questions to this ML to which I can specifically reply.

Pat

Pat Kinney
Kinney Consulting LLC
IEEE 802.15 WG vice chair, TG chair
ISA100.11a WG chair
O: +1.847.960.3715
[e-mail]






On 30, Mar2015, at 13:22, Rene Struik <[e-mail]> wrote:

Hi Pascal:

I think the proper approach is that one investigates whether an updated version of a cross-referenced specification is suitable and, if so, one can adopt this.

To me, it is not a given that the revision effort of 802.15.4 that is currently on its way will automatically satisfy requirements 6TiSCH has. I am wondering how we would know, since so far technical changes have never been discussed/socialized within 6TiSCH itself (see also http://www.ietf.org/mail-archive/web/6tisch/current/msg02853.html). Anecdotal evidence regarding extensive changes makes me somewhat pessimistic here.

We should use a "trust but verify" approach here. Anything else would be imprudent. I think this more or less reiterates Subir Das's point.

So, I am not in favor of implicit, blind trust; only in favor of explicit, verified trust. Unfortunately, this means I think the recommendation you put forward below is imprudent.

As a final note:
a) not sure why the 802.15.4e amendment would be incomplete. This seems to be in direct conflict with the note on page 1 of the 802.15.4e-2012 standard (NOTE—The editing instructions contained in this amendment define how to merge the material contained therein into the existing base standard and its amendments to form the comprehensive standard).
b) Not sure how one can already predict now when the current revision work will be end and result in a revised standard. Assuming that this will be in 2015 (with sponsor ballot not having started yet) seems somewhat premature.

Rene

On 3/30/2015 11:23 AM, Pascal Thubert (pthubert) wrote:
> Dear all:
> 
> Pat presented at the WG on Thursday his recommendation to remove the 'e' after IEEE802.15.4 in our current charter and WG Documents (slides at the end of http://www.ietf.org/proceedings/92/slides/slides-92-6tisch-2.pdf ).
> 
> The net effect would be that when a new version of the standard is published - 2015 should be available soon -, our normative references will implicitly pick that latest version and inherit the fixes that were made since then, as well as the additional PHYs on which 802.15.4 TSCH can operate.
> 
> Pat indicated that this procedure is the expected one when referring to IEEE documents. Subir noted that at the IETF we normally have reference on particular versions, and a change in an RFC is a new RFC thus a new reference, and the IEEE form of reference may create an issue with IETF practice. The chairs will need to validate this before proceeding.
> 
> On the question whether the change is desirable, Pat made the case that 15.4e is just an amendment, which is an incomplete reference, and that it yields some incorrectness that is now fixed in the upcoming 2015 version of 802.15.4.
> All in all the group agreed that the change is desirable. We are now coming to the list to confirm the consensus. If you have an issue with removing the 'e' please speak up now.
> 
> Cheers,
> 
> Pascal and Thomas
> 
> _______________________________________________
> 6tisch mailing list
> [e-mail]
> https://www.ietf.org/mailman/listinfo/6tisch


-- 
email: [e-mail] | Skype: rstruik
cell: [phone] | US: [phone]

_______________________________________________
6tisch mailing list
[e-mail]
https://www.ietf.org/mailman/listinfo/6tisch