Re: [core-parameters] NEW RESOURCE TYPE - oma.lwm2m

[John Mudge <[e-mail]>]

Dear Esko,

Thank you, your revised description is fine.

Kind regards,

John

-----Original Message-----
From: Dijk, Esko [mailto:[e-mail]] 
Sent: 16 November 2016 12:14
To: John Mudge <[e-mail]>; [e-mail]
Subject: RE: NEW RESOURCE TYPE - oma.lwm2m

Dear John,

Thanks; I still think this description could be clarified a bit more. Though the current text would also work, since the LWM2M spec reference defines it properly anyhow.

The Lightweight M2M 1.0 spec states that the resource type 'oma.lwm2m' is used only for the resource that is acting as the top-level parent (i.e. ancestor) for all the OMA Lightweight M2M Objects and Resources. So this rt cannot be used itself for tagging say a LWM2M Resource or an Object Instance. It can only be used to identify a top-level entry point for the LWM2M resource structure.

So what about:

   o  Description: Indicates this resource and all its sub-resources support the OMA Lightweight M2M protocol, i.e. contain OMA LWM2M objects and resources.

regards
Esko

-----Original Message-----
From: John Mudge [mailto:[e-mail]] 
Sent: Tuesday, November 15, 2016 17:31
To: Dijk, Esko <[e-mail]>; [e-mail]
Subject: RE: NEW RESOURCE TYPE - oma.lwm2m

Thank you Esko for your comment and suggestion.

The OMA DM working group have endeavoured to clarify the description and have proposed the following alternative text:

   o  Description: Indicates the URI contents is for the OMA LwM2M protocol e.g. OMA LwM2M objects and resources.

Would this revised text be satisfactory?

Thank you and kind regards,

John

-----Original Message-----
From: Dijk, Esko [mailto:[e-mail]] 
Sent: 10 November 2016 20:19
To: John Mudge <[e-mail]>; [e-mail]
Subject: RE: NEW RESOURCE TYPE - oma.lwm2m

Hello,

perhaps the description could be clarified a bit to e.g.:

  o  Description: The OMA Lightweight M2M entry-point resource in the LWM2M client (CoAP server).

To clarify the term 'client' more.

regards
Esko Dijk

-----Original Message-----
From: core-parameters [mailto:[e-mail]] On Behalf Of John Mudge
Sent: Thursday, November 10, 2016 18:52
To: [e-mail]
Subject: [core-parameters] NEW RESOURCE TYPE - oma.lwm2m

Hi,

This registration request proposes to add the value oma.lwm2m to the sub-registry Resource Type (rt=) Link Target Attribute Values, within the Constrained RESTful Environments (CoRE) Parameters registry.

The completed registration template is as follows:

   o  Attribute Value: oma.lwm2m

   o  Description: This value denotes the OMA LightweightM2M application in the client.

   o  Reference: "Lightweight Machine to Machine Technical Specification", OMA-TS-LightweightM2M-V1_0, especially subsection 5.3.1,
      http://www.openmobilealliance.org/tech/extref/OMA-TS-LightweightM2M-V1_0.zip

   o  Notes: N/A


Please let me know if you have any comments or questions.

Thank you and kind regards,

John

----------------------------------------
John Mudge
Open Mobile Alliance
Cell: (+44) (0)75 91 53 17 47
Email: [e-mail]
----------------------------------------

_______________________________________________
core-parameters mailing list
[e-mail]
https://www.ietf.org/mailman/listinfo/core-parameters

________________________________
The information contained in this message may be confidential and legally protected under applicable law. The message is intended solely for the addressee(s). If you are not the intended recipient, you are hereby notified that any use, forwarding, dissemination, or reproduction of this message is strictly prohibited and may be unlawful. If you are not the intended recipient, please contact the sender by return e-mail and destroy all copies of the original message.