Re: [core] [SenML] Multiple values in a measurement

[Ari Keränen <[e-mail]>]

Also probably worth noting that if you have more thank one set of 
triples in a single SenML Pack, you can link them together using the 
time field.


Cheers,
Ari

On 08/11/2018 0.38, Michael Koster wrote:
> Here is one possibility:
> 
> [
>    {
>      "bn": "inertialmeasurement",
>      "bu": "rad/s",
>      "n": "xvalue",
>      "v": 0.34,
>    },
>    {
>      "n": "yvalue",
>      "v": 1.43,
>    },
>    {
>      "n": "zvalue",
>      "v": 0.23,
>    }
> ]
> 
> Or as an IPSO Smart Object representationfor the accelerometer object 
> type (3313):
> 
> [
>    {
>      "bn": "3313/0/",
>      "n": "5701",
>      "vs": "rad/s",
>    },
>    {
>      "n": "5702",
>      "v": 0.34
>   },
>    {
>      "n": "5703",
>      "v": 0.34
>   },
>    {
>      "n": "5704",
>      "v": 0.34
>   }
> ]
> 
> 
> On Oct 18, 2018, at 1:35 AM, Shantanoo Desai <[e-mail] 
> <mailto:[e-mail]>> wrote:
>>
>> Hello all,
>> In a practical scenario there are sensors that provide more than one 
>> values, for e.g., an Inertial Measurement Unit (IMU) will provide 
>> Euler Angles as Yaw, Pitch, Roll indicating orientation of the sensor 
>> node or an Accelerometer which measures linear acceleration in X, Y, Z 
>> directions.
>> Is there any schematic in SenML that would support multiple values?
>> From my understanding there is none and most values are indicated by 
>> the field “v” as a single key:value pair in JSON.
>> <image006.png>
>> Even if I split the reading into three, there might not be clear 
>> distinction since “n” always remains the same (the sensor name is 
>> always “inertialmeasurement”)
>> <image007.png>
>> Is there a way to inculcate such features into senML or is there a way 
>> around this that I have overlooked?
>> Mit freundlichen Grüßen
>>
>> __
>>
>> *i. A. M.Sc. Shantanoo Desai***
>>
>> Wissenschaftlicher Mitarbeiter
>> *BIBA**- Bremer Institut für Produktion und Logistik GmbH*
>> Informations- und kommunikationstechnische Anwendungen in der Produktion
>> Prof. Dr.-Ing. Klaus-Dieter Thoben
>> Raum 1390
>> Tel: [phone]
>> Handy: [phone]
>> [e-mail] <mailto:[e-mail]>
>> <image002.png> 
>> <https://www.linkedin.com/company/biba.uni-bremen.de><image003.png> 
>> <https://www.researchgate.net/institution/BIBA-Bremer_Institut_fuer_Produktion_und_Logistik><image004.png> 
>> <https://www.facebook.com/BIBA.Produktion.Logistik><image005.png> 
>> <http://www.youtube.com/channel/UCieF5Uq5Qix9XZAZuYhTQhg>
>> BIBA – Bremer Institut für Produktion und Logistik GmbH
>> Postanschrift: Postfach P.O.B. 33 05 60 · D-28335 Bremen / Germany
>> Geschäftssitz: Hochschulring 20 · D-28359 Bremen / Germany
>> USt-ID: DE814890109 Amtsgericht Bremen HRB 24505 HB
>> Tel: [phone]  Fax: [phone]
>> E-Mail:[e-mail] 
>> <mailto:[e-mail]>· Internet:www.biba.uni-bremen.de 
>> <http://www.biba.uni-bremen.de/>
>> Geschäftsführer: Prof. Dr.-Ing. K.-D. Thoben, O. Simon
>>
>> <image001.png><oledata.mso>_______________________________________________
>> core mailing list
>> [e-mail] <mailto:[e-mail]>
>> https://www.ietf.org/mailman/listinfo/core
>