Re: [core] 🔔 WGLC of draft-ietf-core-senml-more-units

[Jaime Jiménez <[e-mail]>]

Hi,

today ends the call for this draft. 
The feedback has been positive from all reviewers and it looks the
document is ready to move forward. 

One small nit however is the "rpm" unit, which seems to be already
registered in the main senml registry under the "1/min" name. 
In order to avoid duplication we probably should have one only. 
While OMA folks are making a decission we could simply move this draft forward
without that unit, which they could add afterwars.

Therefore, if the authors and the group are OK with that nit, the
authors can resubmit and we will finalize the WGLC here.

Best Regards,
-- Jaime Jiménez

On Mon, Oct 07, 2019 at 06:00:33PM +0200, Carsten Bormann wrote:
> On Oct 7, 2019, at 11:18, Joaquin Prado <[e-mail]> wrote:
> > 
> > * kvarh (kilovolt-ampere reactive per hour)
> > * kVAh (kilovolt-ampere per hour)
> > * km    (kilometers)
> > * kmh   (kilometer per hour)
> > * rpm    (revolutions per minute)
> 
> Hi Joaquin,
> 
> these can be registered when the document is approved, but it certainly saves time to put them in now.  I have slightly cleaned up the above and put it into the editor’s draft https://core-wg.github.io/senml-more-units/draft-ietf-core-senml-more-units.html (*); diff can be seen below or (together with some previous changes) at https://tinyurl.com/senml-more-units-diff .
> 
> Grüße, Carsten
> 
> diff --git a/draft-ietf-core-senml-more-units.md b/draft-ietf-core-senml-more-units.md
> index 7618e16..c50792f 100644
> --- a/draft-ietf-core-senml-more-units.md
> +++ b/draft-ietf-core-senml-more-units.md
> @@ -123,6 +123,7 @@ subregistry of the SenML registry {{IANA.senml}} (as defined in {{RFC8428}}):
>  |--------+------------------------------------------------+-------+-----------|
>  | B      | Byte (information content)                     | float | RFCthis   |
>  | VA     | volt-ampere (Apparent Power)                   | float | RFCthis   |
> +| VAs    | volt-ampere seconds (Apparent Energy)          | float | RFCthis   |
>  | var    | volt-ampere reactive (Reactive Power)          | float | RFCthis   |
>  | vars   | volt-ampere reactive seconds (Reactive Energy) | float | RFCthis   |
>  | J/m    | joule per meter (Energy per distance)          | float | RFCthis   |
> @@ -207,6 +208,8 @@ The initial content of the secondary units registry is provided in {{secondary-u
>  | Wh             | watt-hour                  | J          |      3600 |        0 | RFCthis     |
>  | kWh            | kilowatt-hour              | J          |   3600000 |        0 | RFCthis     |
>  | varh           | var-hour                   | vars       |      3600 |        0 | RFCthis     |
> +| kvarh          | kilovar-hour               | vars       |   3600000 |        0 | RFCthis     |
> +| kVAh           | kilovolt-ampere-hour       | VAs        |   3600000 |        0 | RFCthis     |
>  | Wh/km          | watts-hour per kilometer   | J/m        |       3.6 |        0 | RFCthis     |
>  | KiB            | kibibyte                   | B          |      1024 |        0 | RFCthis     |
>  | mV             | millivolt                  | V          |    1/1000 |        0 | RFCthis     |
> @@ -217,6 +220,9 @@ The initial content of the secondary units registry is provided in {{secondary-u
>  | ppm            | parts per million          | /          |      1e-6 |        0 | RFCthis     |
>  | hPa            | hectopascal                | Pa         |       100 |        0 | RFCthis     |
>  | mm             | millimeter                 | m          |    1/1000 |        0 | RFCthis     |
> +| km             | kilometer                  | km         |      1000 |        0 | RFCthis     |
> +| km/h           | kilometer per hour         | m/s        |     1/3.6 |        0 | RFCthis     |
> +| rpm            | (revolutions) per minute   | 1/s        |      1/60 |        0 | RFCthis     |
>  {: #secondary-unit-tbl title="Secondary units registered for SenML"}
>  
>  Example: the value of a quantity given as 100 ms is first multiplied
>