Re: [core] 🔔 WGLC of draft-ietf-core-senml-more-units

[Carsten Bormann <[e-mail]>]

I have submitted -02 that should address all WGLC comments:

Htmlized:       https://tools.ietf.org/html/draft-ietf-core-senml-more-units-02
Htmlized:       https://datatracker.ietf.org/doc/html/draft-ietf-core-senml-more-units
Diff:           https://www.ietf.org/rfcdiff?url2=draft-ietf-core-senml-more-units-02

I believe this can now be shipped to the IESG.

Grüße, Carsten


> On Oct 9, 2019, at 15:19, Jaime Jiménez <[e-mail]> wrote:
> 
> 
> Hi,
> 
> today ends the call for this draft. 
> The feedback has been positive from all reviewers and it looks the
> document is ready to move forward. 
> 
> One small nit however is the "rpm" unit, which seems to be already
> registered in the main senml registry under the "1/min" name. 
> In order to avoid duplication we probably should have one only. 
> While OMA folks are making a decission we could simply move this draft forward
> without that unit, which they could add afterwars.
> 
> Therefore, if the authors and the group are OK with that nit, the
> authors can resubmit and we will finalize the WGLC here.
> 
> Best Regards,
> -- Jaime Jiménez
> 
> On Mon, Oct 07, 2019 at 06:00:33PM +0200, Carsten Bormann wrote:
>> On Oct 7, 2019, at 11:18, Joaquin Prado <[e-mail]> wrote:
>>> 
>>> * kvarh (kilovolt-ampere reactive per hour)
>>> * kVAh (kilovolt-ampere per hour)
>>> * km    (kilometers)
>>> * kmh   (kilometer per hour)
>>> * rpm    (revolutions per minute)
>> 
>> Hi Joaquin,
>> 
>> these can be registered when the document is approved, but it certainly saves time to put them in now.  I have slightly cleaned up the above and put it into the editor’s draft https://core-wg.github.io/senml-more-units/draft-ietf-core-senml-more-units.html (*); diff can be seen below or (together with some previous changes) at https://tinyurl.com/senml-more-units-diff .
>> 
>> Grüße, Carsten
>> 
>> diff --git a/draft-ietf-core-senml-more-units.md b/draft-ietf-core-senml-more-units.md
>> index 7618e16..c50792f 100644
>> --- a/draft-ietf-core-senml-more-units.md
>> +++ b/draft-ietf-core-senml-more-units.md
>> @@ -123,6 +123,7 @@ subregistry of the SenML registry {{IANA.senml}} (as defined in {{RFC8428}}):
>> |--------+------------------------------------------------+-------+-----------|
>> | B      | Byte (information content)                     | float | RFCthis   |
>> | VA     | volt-ampere (Apparent Power)                   | float | RFCthis   |
>> +| VAs    | volt-ampere seconds (Apparent Energy)          | float | RFCthis   |
>> | var    | volt-ampere reactive (Reactive Power)          | float | RFCthis   |
>> | vars   | volt-ampere reactive seconds (Reactive Energy) | float | RFCthis   |
>> | J/m    | joule per meter (Energy per distance)          | float | RFCthis   |
>> @@ -207,6 +208,8 @@ The initial content of the secondary units registry is provided in {{secondary-u
>> | Wh             | watt-hour                  | J          |      3600 |        0 | RFCthis     |
>> | kWh            | kilowatt-hour              | J          |   3600000 |        0 | RFCthis     |
>> | varh           | var-hour                   | vars       |      3600 |        0 | RFCthis     |
>> +| kvarh          | kilovar-hour               | vars       |   3600000 |        0 | RFCthis     |
>> +| kVAh           | kilovolt-ampere-hour       | VAs        |   3600000 |        0 | RFCthis     |
>> | Wh/km          | watts-hour per kilometer   | J/m        |       3.6 |        0 | RFCthis     |
>> | KiB            | kibibyte                   | B          |      1024 |        0 | RFCthis     |
>> | mV             | millivolt                  | V          |    1/1000 |        0 | RFCthis     |
>> @@ -217,6 +220,9 @@ The initial content of the secondary units registry is provided in {{secondary-u
>> | ppm            | parts per million          | /          |      1e-6 |        0 | RFCthis     |
>> | hPa            | hectopascal                | Pa         |       100 |        0 | RFCthis     |
>> | mm             | millimeter                 | m          |    1/1000 |        0 | RFCthis     |
>> +| km             | kilometer                  | km         |      1000 |        0 | RFCthis     |
>> +| km/h           | kilometer per hour         | m/s        |     1/3.6 |        0 | RFCthis     |
>> +| rpm            | (revolutions) per minute   | 1/s        |      1/60 |        0 | RFCthis     |
>> {: #secondary-unit-tbl title="Secondary units registered for SenML"}
>> 
>> Example: the value of a quantity given as 100 ms is first multiplied
>> 
>