I-D ACTION:draft-ietf-dhc-multopt-01.txt

Internet-Drafts@ietf.org Tue, 05 August 1997 19:27 UTC

Received: from ietf.org by ietf.org id aa18785; 5 Aug 97 15:27 EDT
Received: from ietf.ietf.org by ietf.org id aa18640; 5 Aug 97 15:25 EDT
Mime-Version: 1.0
Content-Type: Multipart/Mixed; Boundary="NextPart"
To: IETF-Announce@ietf.org
Cc: dhcp-v4@bucknell.edu
Sender: ietf-announce-request@ietf.org
From: Internet-Drafts@ietf.org
Reply-to: Internet-Drafts@ietf.org
Subject: I-D ACTION:draft-ietf-dhc-multopt-01.txt
Date: Tue, 05 Aug 1997 15:25:49 -0400
X-Orig-Sender: cclark@ietf.org
Message-ID: <9708051525.aa18640@ietf.org>

A New Internet-Draft is available from the on-line Internet-Drafts directories.
This draft is a work item of the Dynamic Host Configuration Working Group of the IETF.

	Title		: Multicast address allocation extensions options
	Author(s)	: B. Patel, M. Shah
	Filename	: draft-ietf-dhc-multopt-01.txt
	Pages		: 5
	Date		: 1997-08-01
This document describes host configuration options that may be used
   by multicast address allocation protocols[3]. The options include
   critical information such as the IP address (unicast or multicast)
   of the multicast address allocation server(s) and a list of
   multicast scopes supported by respective servers. These options are
   designed to work with the extensions to DHCP [1] servers to support
   multicast address allocation (described in a separate draft),
   however, their use may not be limited to the above protocol.

Internet-Drafts are available by anonymous FTP.  Login wih the username
"anonymous" and a password of your e-mail address.  After logging in,
type "cd internet-drafts" and then
	"get draft-ietf-dhc-multopt-01.txt".
A URL for the Internet-Draft is:

Internet-Drafts directories are located at:

	Africa:	ftp.is.co.za
	Europe: ftp.nordu.net
	Pacific Rim: munnari.oz.au
	US East Coast: ds.internic.net
	US West Coast: ftp.isi.edu

Internet-Drafts are also available by mail.

Send a message to:	mailserv@ds.internic.net.  In the body type:
	"FILE /internet-drafts/draft-ietf-dhc-multopt-01.txt".
NOTE:	The mail server at ds.internic.net can return the document in
	MIME-encoded form by using the "mpack" utility.  To use this
	feature, insert the command "ENCODING mime" before the "FILE"
	command.  To decode the response(s), you will need "munpack" or
	a MIME-compliant mail reader.  Different MIME-compliant mail readers
	exhibit different behavior, especially when dealing with
	"multipart" MIME messages (i.e. documents which have been split
	up into multiple messages), so check your local documentation on
	how to manipulate these messages.
Below is the data which will enable a MIME compliant mail reader
implementation to automatically retrieve the ASCII version of the