[Diffserv] FW: FW: I-D ACTION:draft-cetin-mpls-diffserv-te-mib-00.txt

This is not yet a MPLS WG work item, but there is a 
I-D that I think talks about some of the diffserv
use in MPLS environment. Hope this helps,

Bert 

> >-----Original Message-----
> >From: Internet-Drafts@ietf.org [mailto:Internet-Drafts@ietf.org]
> >Sent: dinsdag 26 november 2002 14:15
> >To: IETF-Announce
> >Cc: mpls@UU.NET
> >Subject: I-D ACTION:draft-cetin-mpls-diffserv-te-mib-00.txt
> >
> >
> >A New Internet-Draft is available from the on-line Internet-Drafts 
> >directories.
> >
> >
> >         Title           : Multiprotocol Label Switching 
> (MPLS) Traffic
> >                           Engineering Management 
> Information Base for 
> > DiffServ
> >         Author(s)       : R. Cetin
> >         Filename        : draft-cetin-mpls-diffserv-te-mib-00.txt
> >         Pages           : 20
> >         Date            : 2002-11-25
> >
> >This memo defines a portion of the Management Information Base (MIB)
> >for use with network management protocols in the Internet community.
> >In particular, it describes managed objects for diffServ based
> >Multiprotocol Label Switching (MPLS) Traffic Engineering.
> >
> >A URL for this Internet-Draft is:
> >http://www.ietf.org/internet-drafts/draft-cetin-mpls-diffserv
-te-mib-00.txt
>
>To remove yourself from the IETF Announcement list, send a message to
>ietf-announce-request with the word unsubscribe in the body of the message.
>
>Internet-Drafts are also available by anonymous FTP. Login with the username
>"anonymous" and a password of your e-mail address. After logging in,
>type "cd internet-drafts" and then
>         "get draft-cetin-mpls-diffserv-te-mib-00.txt".
>
>A list of Internet-Drafts directories can be found in
>http://www.ietf.org/shadow.html
>or ftp://ftp.ietf.org/ietf/1shadow-sites.txt
>
>
>Internet-Drafts can also be obtained by e-mail.
>
>Send a message to:
>         mailserv@ietf.org.
>In the body type:
>         "FILE /internet-drafts/draft-cetin-mpls-diffserv-te-mib-00.txt".
>
>NOTE:   The mail server at ietf.org can return the document in
>         MIME-encoded form by using the "mpack" utility.  To use this
>         feature, insert the command "ENCODING mime" before the "FILE"
>         command.  To decode the response(s), you will need "munpack" or
>         a MIME-compliant mail reader.  Different MIME-compliant mail readers
>         exhibit different behavior, especially when dealing with
>         "multipart" MIME messages (i.e. documents which have been split
>         up into multiple messages), so check your local documentation on
>         how to manipulate these messages.
>
>
>Below is the data which will enable a MIME compliant mail reader
>implementation to automatically retrieve the ASCII version of the
>Internet-Draft.
>
>To:
>Subject:
>Date: Tue, 26 Nov 2002 14:29:31 +0100
>MIME-Version: 1.0
>X-Mailer: Internet Mail Service (5.5.2653.19)
>Content-Type: multipart/mixed;
>         boundary="----_=_NextPart_002_01C2955D.77F304AC"
>
>
>
>
><ftp://internet-drafts>

Success is relative; the more success, the more relatives. -Anonymous

_______________________________________________
diffserv mailing list
diffserv@ietf.org
https://www1.ietf.org/mailman/listinfo/diffserv
Archive: http://www.ietf.org/mail-archive/working-groups/diffserv/current/maillist.html