Subject: RE: [Entmib] Entity Management and Dual IP Stack
From: "Eduardo Cardona" <[email-masked]>
To: "Sharon Chisholm" <[email-masked]>, "Entmib-wg (E-mail)" <[email-masked]>
Date: Thu, 27 Oct 2005 12:01:26 -0600
List-Id: IETF Entity MIB WG <entmib.ietf.org>

Thanks for the reply. 

It is one logical entity with two IP management addresses  ( one IPv4
and one IPv6), my question is how to configure entLogicalTDomain and
entLogicalTAddress to support both IPv4 and IPv6 for the same logical
entitiy 

Eduardo

-----Original Message-----
From: Sharon Chisholm [mailto:[email-masked]] 
Sent: Thursday, October 27, 2005 10:26 AM
To: Entmib-wg (E-mail)
Subject: RE: [Entmib] Entity Management and Dual IP Stack

hi

Are you saying it has two IP addresses, or supports both Ipv4/IPv6 or
that it is two logical devices (virtual router, etc)? In the first two
cases you only have one logical devices from the Entity MIB's
perspective.

Sharon

-----Original Message-----
From: [email-masked] [mailto:[email-masked]] On Behalf
Of Eduardo Cardona
Sent: Thursday, October 20, 2005 10:37 AM
To: Entmib-wg (E-mail)
Subject: [Entmib] Entity Management and Dual IP Stack

I have a question, 

For an entity with 2+ logical entities (implements entLogicalTable) How
do you define the logical entity if the device has dual stack and is
manageable using both IPs ? 
Shall it defines a duplicate logical entity for the second
entLogicalTAddress? 

I mean, in the interest of reflecting entLogicalTable entries? Or is
left vendor dependent? 

Thanks

Eduardo

_______________________________________________
Entmib mailing list
[email-masked]
https://www1.ietf.org/mailman/listinfo/entmib

_______________________________________________
Entmib mailing list
[email-masked]
https://www1.ietf.org/mailman/listinfo/entmib

_______________________________________________
Entmib mailing list
[email-masked]
https://www1.ietf.org/mailman/listinfo/entmib