missing 0's in Path descriptions

Anil Rijsinghani <anil@levers.enet.dec.com> Mon, 27 September 1993 19:11 UTC

Received: from ietf.nri.reston.va.us by IETF.CNRI.Reston.VA.US id aa23441; 27 Sep 93 15:11 EDT
Received: from CNRI.RESTON.VA.US by IETF.CNRI.Reston.VA.US id aa23437; 27 Sep 93 15:11 EDT
Received: from CS.UTK.EDU by CNRI.Reston.VA.US id aa23174; 27 Sep 93 15:11 EDT
Received: from localhost by CS.UTK.EDU with SMTP (5.61+IDA+UTK-930922/2.8s-UTK) id AA27662; Mon, 27 Sep 93 14:35:31 -0400
X-Resent-To: fddi-mib@CS.UTK.EDU ; Mon, 27 Sep 1993 14:35:30 EDT
Errors-To: owner-fddi-mib@CS.UTK.EDU
Received: from inet-gw-2.pa.dec.com by CS.UTK.EDU with SMTP (5.61+IDA+UTK-930922/2.8s-UTK) id AA27611; Mon, 27 Sep 93 14:35:07 -0400
Received: by inet-gw-2.pa.dec.com; id AA06437; Mon, 27 Sep 93 11:35:05 -0700
Received: by us1rmc.bb.dec.com; id AA17768; Mon, 27 Sep 93 14:33:43 -0400
Message-Id: <9309271833.AA17768@us1rmc.bb.dec.com>
Received: from levers.enet; by us1rmc.enet; Mon, 27 Sep 93 14:34:01 EDT
Date: Mon, 27 Sep 93 14:34:01 EDT
Sender: ietf-archive-request@IETF.CNRI.Reston.VA.US
From: Anil Rijsinghani <anil@levers.enet.dec.com>
To: fddi-mib@cs.utk.edu
Apparently-To: fddi-mib@cs.utk.edu
Subject: missing 0's in Path descriptions

It's been pointed out that there is an editorial error in the DESCRIPTION
field of a couple of the PATH variables -- I missed a few 0's in
translating msec to nsec.  The corrections are shown below, these
will be made at advancement to DS.

- fddimibPATHTVXLowerBound
  "..shall be 2500 nsec (2.5 ms)."   should be
  "..shall be 2500000 nsec (2.5 ms)."

- fddimibPATHTMaxLowerBound
  "..10000 nsec (10 msec) <= fddimibPATHTMaxLowerBound"   should be
  "..10000000 nsec (10 msec) <= fddimibPATHTMaxLowerBound"

  "..shall be 165000 nsec (165 msec)."  should be
  "..shall be 165000000 nsec (165 msec)."

- fddimibPATHMaxTReq
  "..is 165000 nsec (165 msec)."    should be
  "..is 165000000 nsec (165 msec)."

Anil