Re: [Id-event] Dealing with issuer conflict

Most of what you’re talking about seems to me to be decisions that can be made by particular event definitions or event family definitions.  I have no problem with particular events or event families employing some of the strategies that you’re describing.  The SET spec already facilitates that.

But per previous discussions, we shouldn’t be making restrictions in the SET spec that limit its applicability by making restrictions on claims usage that will only work for some event use cases and will rule out others.  We should hold to the bright-line test that event definitions define what claims are included in SETS (other than the “events” claim itself) and how they’re used.  Intruding on that will unnecessarily limit the applicability of SETs.

                                                                -- Mike

From: Phil Hunt [mailto:phil.hunt@oracle.com]
Sent: Thursday, May 18, 2017 11:41 AM
To: Mike Jones <Michael.Jones@microsoft.com>
Cc: Dick Hardt <dick.hardt@gmail.com>; ID Events Mailing List <id-event@ietf.org>
Subject: Re: [Id-event] Dealing with issuer conflict

Mike,

I’m not sure we’re on the same page here. My impression is this is still on the outstanding list.

Let’s look at some example cases:

For example, if a relying party (e.g. retail store) wants to notify an IDP that the user has been deleted…

Currently in the draft:
When issued by an OpenID Connect issuer:
{

  "iss": "https://connect.myidp.com",

  "sub": "248289761001",

  "aud": ["connect.myidp.com<http://connect.myidp.com>"],

  "iat": 1471566154,

  "jti": "bWJq",

  "events": {

    "http://schemas.openid.net/risc/event-type/account-deleted": {}

  }

}

BUT, when issued by a party other than the issuer of the subject:

{

  "iss": "https://exampleretail.store.com",

  "sub": "248289761001",

  "aud": ["connect.myidp.com<http://connect.myidp.com>"],

  "iat": 1471566154,

  "jti": "bWJq",

  "events": {

    "http://schemas.openid.net/risc/event-type/account-deleted": {

      "iss”:"connect.myidp.com<http://connect.myidp.com>”

    }

  }

}

If you are writing code, if you agree that the OP issues a lot of events, you end up having to check that there’s no embedded “iss” present before you can assume the issuer of the subject is the same as that of the SET token.  This strikes me as very complex.

Regarding your assertion:
Any “sub” at the top-level (if any) should be associated with the “iss” at the top-level, which is always the event issuer.

May be you are thinking that we should be solving this by always issuing embedded iss and sub (Alternative 1):

{

  "iss": "https://exampleretail.store.com",

  "aud": ["connect.myidp.com<http://connect.myidp.com>"],

  "iat": 1471566154,

  "jti": "bWJq",

  "events": {

    "http://schemas.openid.net/risc/event-type/account-deleted": {

      "iss”:”connect.myidp.com<http://connect.myidp.com>”

      "sub": "248289761001",

    }

  }

}

OR, Alternative 2:

{

  "iss": "https://exampleretail.store.com",

  "sub": "248289761001",

  "aud": ["connect.myidp.com<http://connect.myidp.com>"],

  "iat": 1471566154,

  "jti": “bWJq"

  “subIss”:”connect.myidp.com<http://connect.myidp.com>”,

  "events": {

    "http://schemas.openid.net/risc/event-type/account-deleted": {}

  }

}

I can see pros and cons for either. I like option 1 because it also makes the SET different from ID Tokens and Access Tokens.

Option 2 is nice because most SETs we’ve been talking about just have an event type and a subject and no claims.

The best way to define this is to enforce that sub may only be used at the top level if it is globally identifiable (e.g. such as in the case of SCIM URIs).

Phil

Oracle Corporation, Identity Cloud Services Architect & Standards
@independentid
www.independentid.com<http://www.independentid.com>
phil.hunt@oracle.com<mailto:phil.hunt@oracle.com>

On May 18, 2017, at 10:40 AM, Mike Jones <Michael.Jones@microsoft.com<mailto:Michael.Jones@microsoft.com>> wrote:

I believe that the solution already discussed is the best one.  If the event issuer is different than a logical issuer associated with the event subject, then put the logical “iss” and “sub” values inside the event.  Any “sub” at the top-level (if any) should be associated with the “iss” at the top-level, which is always the event issuer.

Any proposal that requires duplicating information, such as requiring “subIss” even when it’s always identical to “iss”, is not a great architectural choice, since it creates unnecessary error conditions that would not otherwise be possible.  (How should implementations handle the case where two values are required to match but don’t?)

                                                                -- Mike

From: Id-event [mailto:id-event-bounces@ietf.org] On Behalf Of Phil Hunt (IDM)
Sent: Thursday, May 18, 2017 7:31 AM
To: Dick Hardt <dick.hardt@gmail.com<mailto:dick.hardt@gmail.com>>
Cc: ID Events Mailing List <id-event@ietf.org<mailto:id-event@ietf.org>>
Subject: Re: [Id-event] Dealing with issuer conflict

??

Happens in any case where sub is not globally identifiable.

In Connect, since sub is not uniquely identified, the iss for the sub must be included. This creates a conflict if the issuer of the SET is not the issuer of the subject.

Resolving the iss conflict has been on the list of issues since chicago.

In RISC we were discussing account close events. I am assume one of the scenarios is RPs will notify IDPs when they close an account. They must use an iss not associated with sub. As things stand now, they will have to assert the extra iss value in their payload---which for most events is complex to parse since their are no other extra claims.

Phil

On May 18, 2017, at 6:36 AM, Dick Hardt <dick.hardt@gmail.com<mailto:dick.hardt@gmail.com>> wrote:
Phil, would you clarify the use case and the requirement to ensure everyone on the list is aligned? Thanks

On Wed, May 17, 2017 at 9:45 PM Phil Hunt (IDM) <phil.hunt@oracle.com<mailto:phil.hunt@oracle.com>> wrote:
In many cases where we are talking about events (eg risc) there is no need for extra claims other than the event type itself.

It occurs to me that in the case of RP issued events the current sectoken format requires an embedded iss to deal with the conflict with the set issuer. It seems to add a lot of complication for most events.

What if we defined a new sectoken top level attribute 'subIss' to mean "subject issuer" and keep iss reserved for the SET issuer.

I would suggest this as a recommended attribute even when iss and subIss are the same for parsing consistency.

Thoughts?

Phil
_______________________________________________
Id-event mailing list
Id-event@ietf.org<mailto:Id-event@ietf.org>
https://www.ietf.org/mailman/listinfo/id-event<https://urldefense.proofpoint.com/v2/url?u=https-3A__www.ietf.org_mailman_listinfo_id-2Devent&d=DwMFaQ&c=RoP1YumCXCgaWHvlZYR8PQcxBKCX5YTpkKY057SbK10&r=JBm5biRrKugCH0FkITSeGJxPEivzjWwlNKe4C_lLIGk&m=p1Vsd1Hb7BX87sV4x9MhtsGbORcuiacHxujwThSnWh4&s=ATYzOXXGto5afit3OgTjh19KczxKCvaBwC7ftofHMrs&e=>
--
Subscribe to the HARDTWARE<https://urldefense.proofpoint.com/v2/url?u=http-3A__hardtware.com_&d=DwMFaQ&c=RoP1YumCXCgaWHvlZYR8PQcxBKCX5YTpkKY057SbK10&r=JBm5biRrKugCH0FkITSeGJxPEivzjWwlNKe4C_lLIGk&m=p1Vsd1Hb7BX87sV4x9MhtsGbORcuiacHxujwThSnWh4&s=NGbCAfBEl5TtskWdjjWOY2cQJA3Fsy9QvntPnstyIkc&e=> mail list to learn about projects I am working on!
_______________________________________________
Id-event mailing list
Id-event@ietf.org<mailto:Id-event@ietf.org>
https://urldefense.proofpoint.com/v2/url?u=https-3A__www.ietf.org_mailman_listinfo_id-2Devent&d=DwICAg&c=RoP1YumCXCgaWHvlZYR8PQcxBKCX5YTpkKY057SbK10&r=JBm5biRrKugCH0FkITSeGJxPEivzjWwlNKe4C_lLIGk&m=p1Vsd1Hb7BX87sV4x9MhtsGbORcuiacHxujwThSnWh4&s=ATYzOXXGto5afit3OgTjh19KczxKCvaBwC7ftofHMrs&e=
_______________________________________________
Id-event mailing list
Id-event@ietf.org<mailto:Id-event@ietf.org>
https://urldefense.proofpoint.com/v2/url?u=https-3A__www.ietf.org_mailman_listinfo_id-2Devent&d=DwICAg&c=RoP1YumCXCgaWHvlZYR8PQcxBKCX5YTpkKY057SbK10&r=JBm5biRrKugCH0FkITSeGJxPEivzjWwlNKe4C_lLIGk&m=8LfCYox0y3ghN8YAXLrAb5zfUt5rVD8vbwKwvw8-Rjk&s=gv4-yN8LDVir82WEWzix61-YzkrfquEPKMk_TtLylrw&e=