Re: [Idr] https://tools.ietf.org/html/draft-wang-idr-rd-orf-00

[Aijun Wang <[e-mail]>]

Hi, Jakob:

 

Some clarification should be made later within the draft. 

Actually, the RD-ORF message will be regenerated between every BGP session, not propagate directly back to the upstream, as that done in BGP Update messages.

Then, every regeneration point(RR/ASBR) can control whether or not send the newly generated RD-ORF to the upstream.  In scenarios that when not all of PEs are overwhelmed by routes from this specified VPN, the RR/ASBR can constraint the sending of the RD-ORF policy to the source.

 

 

Best Regards

 

Aijun Wang

China Telecom    

 

From: [e-mail] [mailto:[e-mail]] On Behalf Of Jakob Heitz (jheitz)
Sent: Friday, July 17, 2020 5:22 AM
To: Robert Raszuk <[e-mail]>; Aijun Wang <[e-mail]>
Cc: idr@ietf. org <[e-mail]>
Subject: Re: [Idr] https://tools.ietf.org/html/draft-wang-idr-rd-orf-00

 

I can see how you might want to do max-prefix filtering by RD.

Suppose there are many PEs in an AS that all have VRFs for the same VPN,

but only one of them is sending too many routes.

In that case, you can't filter just that one VRF by RT.

You need RD.

Sure, you will end up with partial routes and a bit of a mess, as Robert points out, but that's the nature of max-prefix anyway. It is a safety valve that prevents a big disaster by causing a smaller disaster.

 

One thing I do see a problem with is that the RR or ASBR propagates 

a received ORF back to the source of the routes.

That RR or ASBR may have other clients that still want the routes.

ORFs are not designed to be propagated.

 

Regards,

Jakob.

 

From: Idr <[e-mail] <mailto:[e-mail]> > On Behalf Of Robert Raszuk
Sent: Thursday, July 16, 2020 12:21 PM
To: Aijun Wang <[e-mail] <mailto:[e-mail]> >
Cc: idr@ietf. org <[e-mail] <mailto:[e-mail]> >
Subject: Re: [Idr] https://tools.ietf.org/html/draft-wang-idr-rd-orf-00

 

Aijun,

 

I do understand that you want to push in RD-ORD pre import RDs. Perhaps selecting first those which advertise the most VPN routes. 

 

But this is so severely broken idea that I am not sure how to even describe it. Just imagine the mess of now partially broken VPN users which asked for full mesh and got now partially working and partially broken mesh. 

 

This would be also terrible to troubleshoot (even assuming that you would refrain from RD-ORF propagation). 

 

Bottom line - to control number of VPN routes - for years operators have deployed prefix limit on ingress to the SP network (PE-CE edge). Once prefix is accepted into a network it better be installed when VPN topology requires it. 

 

Filtering per RD is a really BAD IDEA. 

 

Thx,
R.

 

On Thu, Jul 16, 2020 at 10:58 AM Aijun Wang <[e-mail] <mailto:[e-mail]> > wrote:

Hi, Robert:

 

When the RD is designed as per VRF per PE, the mechanism of RD based ORF can also apply-------The received router needs only extract and reflect the most influenced RDs back to upstream router(ASBR/RR),  and then to notify the source of these VPN routes to control the prefixes advertisement.

Actually, the above design will make the RD-ORF more accurate than the RT based control.

 

 

Best Regards

 

Aijun Wang

China Telecom

 

 

 

From: [e-mail] <mailto:[e-mail]>  [mailto:robert@raszuk..net <mailto:[e-mail]> ] 
Sent: Thursday, July 16, 2020 3:06 PM
To: Aijun Wang <[e-mail] <mailto:[e-mail]> >
Cc: [e-mail] <mailto:[e-mail]> ; Aijun Wang <[e-mail] <mailto:[e-mail]> >; idr@ietf. org <[e-mail] <mailto:[e-mail]> >
Subject: Re: [Idr] https://tools.ietf.org/html/draft-wang-idr-rd-orf-00

 

> It can also be used to identify the VPN customer.  

 

Sorry but no. 

 

Best practice for number of reasons is to make RD unique per VRF and not per VPN. We should not standardize something which is a pretty bad idea to start with. 

 

Kind regards,

Robert

 

 

 

 

 

On Thu, Jul 16, 2020 at 4:40 AM Aijun Wang <[e-mail] <mailto:[e-mail]> > wrote:

Hi, Robert:

 

Thanks for your reviews and comments.

As you said, RD is to make the VPN prefix unique within the VPN’s domain. It can also be used to identify the VPN customer.

The usage of RT, just as you said, is to control what routes are distributed where, that is to say, to control the customer’s VPN topology. RT can’t be used to identify one VPN customer.

 

The scenarios/problems described in this draft(https://tools.ietf.org/html/draft-wang-idr-rd-orf-00) are not for the VPN topology control, but for the VPN prefix limit management, which is signed along with the agreement with the VPN customer.

This is the reason that we select the RD-based ORF control mechanism.

 

More detail reply are inline below. Wish to get more your comments/suggestions on them.

 

Thanks in advance.

 

Best Regards

 

Aijun Wang

China Telecom 

 

From: [e-mail] <mailto:[e-mail]>  [mailto:[e-mail] <mailto:[e-mail]> ] On Behalf Of Robert Raszuk
Sent: Thursday, July 16, 2020 2:26 AM
To: [e-mail] <mailto:[e-mail]> ; Aijun Wang <[e-mail] <mailto:[e-mail]> >
Cc: idr@ietf. org <[e-mail] <mailto:[e-mail]> >
Subject: [Idr] https://tools.ietf.org/html/draft-wang-idr-rd-orf-00

 

Dear Aijun & Wei,

 

I have read your draft as per subject. 

 

I think there is a serious misunderstanding on what RD's role is in RFC4364. 

 

RDs MUST never be used to signal anything which would in any way influence what routes are distributed where. Their sole role is to make the VPN prefix unique across given VPN's domain. 

【WAJ】RD can be used to identify one VPN customer

 

It is RTs which are used to import routes to VRFs on PEs. What you are trying to do is exactly why we have defined some time back RTC (RFC4684). Applications from section 5.1 and 5.2 can be happily addressed with use of RTC. 

【WAJ】RT is used to control VPN topology, same as the mechanism of RTC(4684). But the application described in section 5.1 and 5.2 of this draft is not for VPN topology control, but for VPN route-limit management, which is based on customer/RD.

 

Informationally let me also point out that RFC7543 has defined extensions to ORF to signal RTs for reducing size VPN RIBs in specific Hub & Spoke topologies. 

【WAJ】RFC7543 is to pull the prefix that cover one specific host address, to get the more optimal route information from the Hub, not the same scenarios as described in the current draft.

 

Last your proposal calls for treating ORF as a transitive message without any loop protection. That is not a good idea. 

【WAJ】ORF messages are exchanged within only the directed BGP sessions. Such Messages will be regenerated when it is needed to send to another BGP peer.  Would you like to describe more for the loop scenarios? 

 

I recommend to protect your PEs from being overwhelmed by VPN routes by prefix limit instead. 

【WAJ】Prefix Limit mechanism can be used for Option –A, but not for Option B/C, as that described in the draft.

 

Kind regards,

R.

 

PS. Did we have any discussion in IDR or BESS on this proposal ?