Re: [Idr] [Responses for the comments during the IETF108] New Version Notification for draft-wang-idr-rd-orf-01.txt

Aijun Wang <wangaijun@tsinghua.org.cn> Fri, 07 August 2020 00:59 UTC

Return-Path: <wangaijun@tsinghua.org.cn>
X-Original-To: idr@ietfa.amsl.com
Delivered-To: idr@ietfa.amsl.com
Received: from localhost (localhost [127.0.0.1]) by ietfa.amsl.com (Postfix) with ESMTP id 51A2E3A0C9D for <idr@ietfa.amsl.com>; Thu, 6 Aug 2020 17:59:03 -0700 (PDT)
X-Virus-Scanned: amavisd-new at amsl.com
X-Spam-Flag: NO
X-Spam-Score: -1.799
X-Spam-Level:
X-Spam-Status: No, score=-1.799 tagged_above=-999 required=5 tests=[BAYES_00=-1.9, HTML_MESSAGE=0.001, HTTPS_HTTP_MISMATCH=0.1, RCVD_IN_MSPIKE_H2=-0.001, SPF_HELO_NONE=0.001, SPF_PASS=-0.001, URIBL_BLOCKED=0.001] autolearn=no autolearn_force=no
Received: from mail.ietf.org ([4.31.198.44]) by localhost (ietfa.amsl.com [127.0.0.1]) (amavisd-new, port 10024) with ESMTP id G1RRf-4Yzz9L for <idr@ietfa.amsl.com>; Thu, 6 Aug 2020 17:58:59 -0700 (PDT)
Received: from mail-m127101.qiye.163.com (mail-m127101.qiye.163.com [115.236.127.101]) (using TLSv1.2 with cipher AECDH-AES256-SHA (256/256 bits)) (No client certificate requested) by ietfa.amsl.com (Postfix) with ESMTPS id 5D2DD3A0B9D for <idr@ietf.org>; Thu, 6 Aug 2020 17:58:57 -0700 (PDT)
Received: from DESKTOP2IOH5QC (unknown [219.142.69.75]) by mail-m127101.qiye.163.com (Hmail) with ESMTPA id ECA15467E4; Fri, 7 Aug 2020 08:58:53 +0800 (CST)
From: "Aijun Wang" <wangaijun@tsinghua.org.cn>
To: "'UTTARO, JAMES'" <ju1738@att.com>, "'Gyan Mishra'" <hayabusagsm@gmail.com>
Cc: "'Keyur Patel'" <keyur@arrcus.com>, <wangw36@chinatelecom.cn>, "'Robert Raszuk'" <robert@raszuk.net>, "'idr'" <idr@ietf.org>
References: <CABNhwV0upBRPwMmjV86ZOb1HObtugY5TQ5AdTt=tzv6mS=EzJg@mail.gmail.com> <2FFFEB16-DAAC-4E8A-AD24-7880A091F46E@tsinghua.org.cn> <9c4a5bbd9370474ba8ca1723540fcd3b@att.com>
In-Reply-To: <9c4a5bbd9370474ba8ca1723540fcd3b@att.com>
Date: Fri, 7 Aug 2020 08:58:47 +0800
Message-ID: <00a301d66c55$e8995070$b9cbf150$@tsinghua.org.cn>
MIME-Version: 1.0
Content-Type: multipart/related; boundary="----=_NextPart_000_00A4_01D66C98.F6BF4F90"
X-Mailer: Microsoft Outlook 16.0
Thread-Index: AQF6K9mQWDQc9cXIAl3NKDRmBs5luQKKUtWcAZsXsu2pwyVe8A==
Content-Language: zh-cn
X-HM-Spam-Status: e1kfGhgUHx5ZQUpXWQgYFAkeWUFZS1VLWVdZKFlBSkxLS0o3V1ktWUFJV1 kPCRoVCBIfWUFZQ0pLTE8aHR5ITUsaVkpOQk1MTUpCSE9ISE9VEwETFhoSFyQUDg9ZV1kWGg8SFR 0UWUFZT0tIVUpKS0hKTFVKS0tZBg++
X-HM-Sender-Digest: e1kMHhlZQR0aFwgeV1kSHx4VD1lBWUc6OSI6MCo6HT8hOUksOAsDAVYJ PFZPCjFVSlVKTkJNTE1KQkhPQk9PVTMWGhIXVQwaFRwaEhEOFTsPCBIVHBMOGlUUCRxVGBVFWVdZ EgtZQVlJSkJVSk9JVU1CVUxOWVdZCAFZQU5MSElNNwY+
X-HM-Tid: 0a73c66d895e9865kuuueca15467e4
Archived-At: <https://mailarchive.ietf.org/arch/msg/idr/kli_qeGvT6ZbXSxnZVYvuYosC88>
Subject: Re: [Idr] [Responses for the comments during the IETF108] New Version Notification for draft-wang-idr-rd-orf-01.txt
X-BeenThere: idr@ietf.org
X-Mailman-Version: 2.1.29
Precedence: list
List-Id: Inter-Domain Routing <idr.ietf.org>
List-Unsubscribe: <https://www.ietf.org/mailman/options/idr>, <mailto:idr-request@ietf.org?subject=unsubscribe>
List-Archive: <https://mailarchive.ietf.org/arch/browse/idr/>
List-Post: <mailto:idr@ietf.org>
List-Help: <mailto:idr-request@ietf.org?subject=help>
List-Subscribe: <https://www.ietf.org/mailman/listinfo/idr>, <mailto:idr-request@ietf.org?subject=subscribe>
X-List-Received-Date: Fri, 07 Aug 2020 00:59:04 -0000

Hi, Jim:

Please see the clarification inline below.

 

From: UTTARO, JAMES [mailto:ju1738@att.com] 
Sent: Thursday, August 6, 2020 8:53 PM
To: Aijun Wang <wangaijun@tsinghua.org.cn>cn>; Gyan Mishra <hayabusagsm@gmail.com>
Cc: Keyur Patel <keyur@arrcus.com>om>; wangw36@chinatelecom.cn; Robert Raszuk <robert@raszuk.net>et>; idr <idr@ietf.org>
Subject: RE: [Idr] [Responses for the comments during the IETF108] New Version Notification for draft-wang-idr-rd-orf-01.txt

 

Comments In-Line

 

Jim Uttaro

 

From: Idr <idr-bounces@ietf.org <mailto:idr-bounces@ietf.org> > On Behalf Of Aijun Wang
Sent: Thursday, August 06, 2020 7:30 AM
To: Gyan Mishra <hayabusagsm@gmail.com <mailto:hayabusagsm@gmail.com> >
Cc: Keyur Patel <keyur@arrcus.com <mailto:keyur@arrcus.com> >; wangw36@chinatelecom.cn <mailto:wangw36@chinatelecom.cn> ; Robert Raszuk <robert@raszuk.net <mailto:robert@raszuk.net> >; idr <idr@ietf.org <mailto:idr@ietf.org> >
Subject: Re: [Idr] [Responses for the comments during the IETF108] New Version Notification for draft-wang-idr-rd-orf-01.txt

 

Hi, Gyan and Robert:

 

Maximum Prefix Limit is one method to control the routes between PE and CE, but we should not depend only on it. 

[Jim U>] Why? You can also simply send the default to the CE from the PE if a customer orders that feature? 

[WAJ] Sorry for the inaccurate description. What I want to say are the followings:

1)     Maximum Prefix Limit is one method to control the routes between PE and CE.

2)     But we should not depend only on it to make sure all PEs within the domain will be configured/behavior properly.

3)     In such cases, we should suppress/back pressure the overflowed VPN routes as soon as possible, keep the possible disaster in limited scope.

 

 

RD-ORF can limit the influence scope of misbehavior PE as small as possible.

 

RT-ORF can suppress the routes from unwanted VRFs, but can’t suppress the overflow routes in VRF that it is interested.

 

More details responses are inline below.

Aijun Wang

China Telecom

 

On Aug 6, 2020, at 18:02, Gyan Mishra <hayabusagsm@gmail.com <mailto:hayabusagsm@gmail.com> > wrote:



 

Hi Robert 

 

I am in agreement as you stated that most service providers from my experience use the per VRF prefix limit to protect resources.  Problem solved as you said 20+ years ago.  

 

That is a general rule of thumb for any service providers to perform due diligence on their PE memory resource carving per VRF and set it appropriately based on platform and total number of VRFs to account for.  

 

Problem solved on the SP end.

 

On the customer end, they can also use the maximum prefix peer command as well to prevent flood of routes in case of unwanted advertisements from unintentional VRF leaking by providers.

 

Kind Regards 

 

Gyan

 

 

On Thu, Aug 6, 2020 at 5:49 AM Robert Raszuk <robert@raszuk.net <mailto:robert@raszuk.net> > wrote:

Hi Gyan,

 

Thank you for your comments - all very valid observations. 

 

Just to perhaps clarify one thing ... Problem authors are attempting to address - the way I understand it - is that given resource may be suffering from actually legitimate VPN routes hence to use RTC indeed a lot of additional RTs would have to be applied. 

 

But I do not understand why authors fail to recognize that solution for their problem has been invented and implemented over 20 years ago already. The solution is to control on a per *ingress* VRF basis number of VPN routes customer is authorized to inject into his VPN with eBGP PE-CE prefix limit. 

 

[WAJ] we have mentioned prefix limit solutions in the draft and analysis its applicability scope.

 

Most SPs offering L3VPNs use prefix limit successfully to protect their shared resources for vast majority of customers and deployments. For VPN customers with unpredictable amount of routing CSC model should be used instead. 

 

By all means filtering and dropping accepted into SP network VPN route should not take place. 

 

Thx,
R.

 

 

 

 

 

On Thu, Aug 6, 2020 at 11:41 AM Gyan Mishra <hayabusagsm@gmail.com <mailto:hayabusagsm@gmail.com> > wrote:

Hi Aijun

 

I agree with Robert that you cannot filter by RD or you would drop all the routes and filtering must be done by RT.  Also the issue with RT ORF filter is as Robert mentioned that you may have the same prefix with two different RTs which is common unique by RD and so the ORF would drop the prefixes.  

 

[WAJ] Such situation can only happen at the extraVPN scenarios which should be designed carefully——one must keep the prefixes in these VRFs not overlap. But if the prefixes in these VRFs are not overlap, why do we need to separate them in different VRFs?

In conclusion, this is just corner case and should be avoided in design.

 

 

 

I am not sure I understand what problem you are trying to solve that is not already solved by RTC membership so that only RTs imported by the PE are what is advertised by the RR.  That is most effective way of cutting down the RT flooding that occurs in the RR to PE advertisement.  RT filtering is enabled by Default on all PEs and only if the RT is imported on the PE are the RTs accepted into the vpn rib. That works pretty well in cutting down RT advertisements by the RR.

 

As Robert mentioned each VRF has a maximum prefix which is defined on the PE RIBs per VRF and in general on most current or even hardware within the last 10 years is a minimum 1M prefixes per VRF is pretty standard with most vendors and platforms.  The vpn rib limit is much much higher on the higher end platforms.

 

You draft talks about inter-as issues solved with RT-ORF.  So when PE-PE inter-as option B by default all RTs are dropped due to default RT filtering and only RTs that are accepted are those RTS that are explicitly being imported on the PE ASBR.  There is an option for retain route-target all that disabled the default RT filtering so that all VPN routes can be accepted on the inter-as option B link.  However a RT filter can still be applied to the retian-route-target all so that only pertinent RTs are accepted inter domain.  That seems to work pretty well.

 

As far as inter-as option C, the PE-PE ASBRs do not maintain the VPN RIB.  BGP LU is enabled on the inter-as link for end to end LSP by importing the loopback between ASs for the end to end LSPto be built.   The RRs between the SPs have eBGP VPN IPv4 VPN IPV6 peer with next hop unchanged so the data plane gets built between the PEs.  The RR by default does not have RT filtering enabled by default as does the PE, so is able to reflect all the vpn routes learned to all PEs within each AS.  In the inter-as scenario as well RTC works very well with the RT membership to cut down on RR to PE vpn route advertisements.

 

Kind Regards 

 

Gyan

 

On Wed, Aug 5, 2020 at 12:49 PM Aijun Wang <wangaijun@tsinghua.org.cn <mailto:wangaijun@tsinghua.org.cn> > wrote:

Hi, Robert:

 

Aijun Wang

China Telecom

 

On Aug 6, 2020, at 00:14, Robert Raszuk <robert@raszuk.net <mailto:robert@raszuk.net> > wrote:



 

[WAJ] The VPN routes imported in these VRFs can’t use the same RD, or else, the VPN prefixes in different VRFs will collision on RR.

 

Nothing will "collide" on RRs. 

 

NLRI = RD+Prefix  not just the RD. 

 

[WAJ] The prefix part can be overlap in different VRF. If the RD is same, RD+Prefix will also be overlap.

We must make sure different VRF use different RD to make the VPN prefixes unique within the domain.

 

So you may have completely different prefixes sourced by the same VRF going to completely different VRFs on same or different PEs. 

 

 

[WAJ] This situation is for extraVPN communication, and should be designed carefully to avoid the address collision.. 

If the address space in different VRF need to be considered in such manner, putting them in one VRF may be more straightforward.

 

Kind regards,
R.

 

 

 

 

 

 

_______________________________________________
Idr mailing list
Idr@ietf.org <mailto:Idr@ietf.org> 
https://www.ietf.org/mailman/listinfo/idr <https://urldefense.proofpoint.com/v2/url?u=https-3A__www.ietf.org_mailman_listinfo_idr&d=DwMFaQ&c=LFYZ-o9_HUMeMTSQicvjIg&r=s7ZzB4JbPv3nYuoSx5Gy8Q&m=vGUVGeSbIaab3CHZXYR9nTdhoC9n8mJmzBn-MXyjrhs&s=xe9tiWhsCBAU4lWYxLSLlSMM5biwWA8VyYSQkTsCKBY&e=> 

-- 

 <https://urldefense.proofpoint.com/v2/url?u=http-3A__www.verizon.com_&d=DwMFaQ&c=LFYZ-o9_HUMeMTSQicvjIg&r=s7ZzB4JbPv3nYuoSx5Gy8Q&m=vGUVGeSbIaab3CHZXYR9nTdhoC9n8mJmzBn-MXyjrhs&s=1CG15Fr_K45Y_dPT3zpGJPXt3MDr_d0XnL1mWRoWULg&e=> 

Gyan Mishra

Network Solutions Architect 

M 301 502-1347
13101 Columbia Pike <https://urldefense.proofpoint.com/v2/url?u=https-3A__www.google.com_maps_search_13101-2BColumbia-2BPike-25C2-25A0-2BSilver-2BSpring-2C-2BMD-3Fentry-3Dgmail-26source-3Dg&d=DwMFaQ&c=LFYZ-o9_HUMeMTSQicvjIg&r=s7ZzB4JbPv3nYuoSx5Gy8Q&m=vGUVGeSbIaab3CHZXYR9nTdhoC9n8mJmzBn-MXyjrhs&s=utgIfn_Y9VMzfNxDpdsJaV6R1zVSL-Mtm6R24FmW1S4&e=>  
Silver Spring, MD <https://urldefense.proofpoint.com/v2/url?u=https-3A__www.google.com_maps_search_13101-2BColumbia-2BPike-25C2-25A0-2BSilver-2BSpring-2C-2BMD-3Fentry-3Dgmail-26source-3Dg&d=DwMFaQ&c=LFYZ-o9_HUMeMTSQicvjIg&r=s7ZzB4JbPv3nYuoSx5Gy8Q&m=vGUVGeSbIaab3CHZXYR9nTdhoC9n8mJmzBn-MXyjrhs&s=utgIfn_Y9VMzfNxDpdsJaV6R1zVSL-Mtm6R24FmW1S4&e=> 

 

-- 

 <https://urldefense.proofpoint.com/v2/url?u=http-3A__www.verizon.com_&d=DwMFaQ&c=LFYZ-o9_HUMeMTSQicvjIg&r=s7ZzB4JbPv3nYuoSx5Gy8Q&m=vGUVGeSbIaab3CHZXYR9nTdhoC9n8mJmzBn-MXyjrhs&s=1CG15Fr_K45Y_dPT3zpGJPXt3MDr_d0XnL1mWRoWULg&e=> 

Gyan Mishra

Network Solutions Architect 

M 301 502-1347
13101 Columbia Pike 
Silver Spring, MD