I-D ACTION:draft-ietf-ipcdn-subscriber-mib-14.txt

[[e-mail]]

A New Internet-Draft is available from the on-line Internet-Drafts directories.
This draft is a work item of the IP over Cable Data Network Working Group of the IETF.

	Title		: Management Information Base for Data Over Cable Service 
			  Interface Specification (DOCSIS) Cable Modem Termination 
			  Systems for Subscriber Management
	Author(s)	: W. Sawyer
	Filename	: draft-ietf-ipcdn-subscriber-mib-14.txt
	Pages		: 25
	Date		: 2004-2-16
	
This memo defines a portion of the Management Information Base (MIB)
for use with network management protocols in the Internet community.
In particular, it defines a set of managed objects for SNMP-based
management of Data-over-Cable Service Interface Specification
(DOCSIS)-compliant Cable Modem Termination Systems. These managed
objects facilitate protection of the cable network from misuse by
subscribers.
This memo is a product of the IPCDN working group within the Internet
Engineering Task Force.  Comments are solicited and should be
addressed to the working group's mailing list at [e-mail]
and/or the author.

A URL for this Internet-Draft is:
http://www.ietf.org/internet-drafts/draft-ietf-ipcdn-subscriber-mib-14.txt

To remove yourself from the IETF Announcement list, send a message to 
ietf-announce-request with the word unsubscribe in the body of the message.

Internet-Drafts are also available by anonymous FTP. Login with the username
"anonymous" and a password of your e-mail address. After logging in,
type "cd internet-drafts" and then
	"get draft-ietf-ipcdn-subscriber-mib-14.txt".

A list of Internet-Drafts directories can be found in
http://www.ietf.org/shadow.html 
or ftp://ftp.ietf.org/ietf/1shadow-sites.txt


Internet-Drafts can also be obtained by e-mail.

Send a message to:
	[e-mail].
In the body type:
	"FILE /internet-drafts/draft-ietf-ipcdn-subscriber-mib-14.txt".
	
NOTE:	The mail server at ietf.org can return the document in
	MIME-encoded form by using the "mpack" utility.  To use this
	feature, insert the command "ENCODING mime" before the "FILE"
	command.  To decode the response(s), you will need "munpack" or
	a MIME-compliant mail reader.  Different MIME-compliant mail readers
	exhibit different behavior, especially when dealing with
	"multipart" MIME messages (i.e. documents which have been split
	up into multiple messages), so check your local documentation on
	how to manipulate these messages.
		
		
Below is the data which will enable a MIME compliant mail reader
implementation to automatically retrieve the ASCII version of the
Internet-Draft.

ftp://ftp.ietf.org/internet-drafts/draft-ietf-ipcdn-subscriber-mib-14.txt"><ftp://ftp.ietf.org/internet-drafts/draft-ietf-ipcdn-subscriber-mib-14.txt>