Re: [Isis-wg] WG Last Call for draft-ietf-isis-reverse-metric-07

Alexander Okonnikov <alexander.okonnikov@gmail.com> Thu, 18 January 2018 18:36 UTC

Return-Path: <alexander.okonnikov@gmail.com>
X-Original-To: isis-wg@ietfa.amsl.com
Delivered-To: isis-wg@ietfa.amsl.com
Received: from localhost (localhost [127.0.0.1]) by ietfa.amsl.com (Postfix) with ESMTP id 4566312895E; Thu, 18 Jan 2018 10:36:05 -0800 (PST)
X-Virus-Scanned: amavisd-new at amsl.com
X-Spam-Flag: NO
X-Spam-Score: 2.301
X-Spam-Level: **
X-Spam-Status: No, score=2.301 tagged_above=-999 required=5 tests=[BAYES_00=-1.9, DKIM_SIGNED=0.1, DKIM_VALID=-0.1, DKIM_VALID_AU=-0.1, FREEMAIL_FROM=0.001, GB_SUMOF=5, HTML_MESSAGE=0.001, RCVD_IN_DNSWL_LOW=-0.7, SPF_PASS=-0.001] autolearn=no autolearn_force=no
Authentication-Results: ietfa.amsl.com (amavisd-new); dkim=pass (2048-bit key) header.d=gmail.com
Received: from mail.ietf.org ([4.31.198.44]) by localhost (ietfa.amsl.com [127.0.0.1]) (amavisd-new, port 10024) with ESMTP id Txrl7Il3-VPy; Thu, 18 Jan 2018 10:35:59 -0800 (PST)
Received: from mail-lf0-x235.google.com (mail-lf0-x235.google.com [IPv6:2a00:1450:4010:c07::235]) (using TLSv1.2 with cipher ECDHE-RSA-AES128-GCM-SHA256 (128/128 bits)) (No client certificate requested) by ietfa.amsl.com (Postfix) with ESMTPS id 5B749129C56; Thu, 18 Jan 2018 10:35:58 -0800 (PST)
Received: by mail-lf0-x235.google.com with SMTP id a204so19620111lfa.2; Thu, 18 Jan 2018 10:35:58 -0800 (PST)
DKIM-Signature: v=1; a=rsa-sha256; c=relaxed/relaxed; d=gmail.com; s=20161025; h=date:from:to:cc:message-id:in-reply-to:references:subject :mime-version; bh=fPSvWAHfHBIrhOuddUaU5z49ZFv24042nXwICtWUgsE=; b=PD/nCjNPHJTkbwCkYvfikbgvwV0Nvas3TTwv3U3pveSfA3AhHAWuK7h3BWHfFqkGwU 9OfNT1+BRpPNYv1UQVJb0Spf0a/nlS16UD8LCRglxZW1mYqJHlSzVtSAbo4UoiTTYX5s ph9YUGZNOuUAGlIIET1yvs6YfdIFzQ+kt/vM6m1OqRm4pp9T75WNllAgIridaPuKAR8Q rkzRS4UCVZzpKG9j9NYO4CwfLYVehDhZXdVnelbJyNDsNZEOdYPybDtdKMJ3Px3S9w3h ZvldXkkWoHas1e9YFmSMB2PMYTPc0omldFY269MOnoFC/fV3EYW3H05fvcdM8UW605y1 Kvag==
X-Google-DKIM-Signature: v=1; a=rsa-sha256; c=relaxed/relaxed; d=1e100.net; s=20161025; h=x-gm-message-state:date:from:to:cc:message-id:in-reply-to :references:subject:mime-version; bh=fPSvWAHfHBIrhOuddUaU5z49ZFv24042nXwICtWUgsE=; b=mAG6GU67Kgz7pETc4AAaVgz0kFZaQrl8X3+rvUzEaA/Fnc9FtsrQTnpER28F3pTheQ DjyfYrx/tfZPYm6eRcLcwDoIrWDdH7olEoJ43dSwXCrHDgpZ5s+weJ1uhm23aTaz+Zq/ 0tLyUvckuaOScSB9so4ZlmWaRFK2zJeG/C/eG68F0BuuoW/oBFP7B8YGUZR/UHcJicsx SwalQxc+63MhHugD9M8ZDDBuy7CMZfwQeNNn55ubxvT2wAJelNeXozSeYry9m4wFfqIv fReIXECx7TkTwJHW9a1CnAk4YQCRTeA4ShoELfYzF7WCxq2mSV3OynJSHVjh4ltuoDHT 2mDA==
X-Gm-Message-State: AKwxytfs1q9s3ALDarguQw4ZNZH0B8p3RXHW2sde3YX6QPTrOQ0ji23u DHIhHxRQ/6oPdcF0EXCKLsfVb8zqpb8=
X-Google-Smtp-Source: ACJfBoujpW8m0p/oJrx1Wys33t4Ep5c76Dn/TU7AwEqUjJbeik7mw0B4OuCgBz7THRoqf7GNgG8UGg==
X-Received: by 10.25.42.196 with SMTP id q65mr17288843lfq.133.1516300556367; Thu, 18 Jan 2018 10:35:56 -0800 (PST)
Received: from [10.0.1.4] ([88.201.167.240]) by smtp.gmail.com with ESMTPSA id y26sm334533ljc.97.2018.01.18.10.35.55 (version=TLS1_2 cipher=ECDHE-RSA-AES128-GCM-SHA256 bits=128/128); Thu, 18 Jan 2018 10:35:55 -0800 (PST)
Date: Thu, 18 Jan 2018 21:35:40 +0300
From: Alexander Okonnikov <alexander.okonnikov@gmail.com>
To: "Naiming Shen (naiming)" <naiming@cisco.com>
Cc: Christian Hopps <chopps@chopps.org>, "Les Ginsberg (ginsberg)" <ginsberg@cisco.com>, "=?utf-8?Q?isis-wg=40ietf.org?=" <isis-wg@ietf.org>, "=?utf-8?Q?isis-ads=40ietf.org?=" <isis-ads@ietf.org>
Message-ID: <2d7d8e4b-8e13-425a-b310-c1528491ef90@Spark>
In-Reply-To: <5F656212-6108-47D5-B114-BBA4A75B83D8@cisco.com>
References: <87375fp3hv.fsf@chopps.org> <7185dbc2d3f34b9ea844ddef95b6278c@XCH-ALN-008.cisco.com> <481C1CEE-A8B4-4034-B016-D2673296E96B@cisco.com> <700e8fed-40fc-cb1a-1ae3-f8401f167aae@gmail.com> <DDC43BA0-7D70-4D7E-B023-A5C04E8B1B88@cisco.com> <DD26DBC2-BFA7-4EFB-B43A-048DABF3CF8A@gmail.com> <DB2AF030-53B0-4566-BF77-D1CE161406D4@cisco.com> <aea70a9bbb0c453c8f49a838b6cfc961@XCH-ALN-001.cisco.com> <B966787C-A028-4439-ACE3-2FB7B7F44AAC@gmail.com> <cb1e0ebb9e44454e900a56ad4a7b59d9@XCH-ALN-001.cisco.com> <2F941D6B-0F3F-482F-A6A6-31153FA6D311@gmail.com> <b9a735f4afba41d4be28eff333d6bb1b@XCH-ALN-001.cisco.com> <4E92E297-A6CA-4635-A60D-362C0AD864D7@gmail.com> <69982e54510942eeb3523d5a7de63fa6@XCH-ALN-001.cisco.com> <1A958D80-C689-447A-96ED-5AA365F2AF14@cisco.com> <87a7xk7nwg.fsf@chopps.org> <63627BFC-62F7-479D-B2EF-C6A7453CE6C5@cisco.com> <eea946106eeb4917a3c1ce780dfd0460@XCH-ALN-001.cisco.com> <e330d5b5-e049-4399-983e-b0cdcceccf0a@Spark> <BB25AEDE-3329-4B42-AF23-0C0C3956CE39@cisco.com> <cf21dccb-9648-8982-eb1d-b41bd8d92c42@gmail.com> <5F656212-6108-47D5-B114-BBA4A75B83D8@cisco.com>
X-Readdle-Message-ID: 2d7d8e4b-8e13-425a-b310-c1528491ef90@Spark
MIME-Version: 1.0
Content-Type: multipart/alternative; boundary="5a60e909_5bd062c2_27e1"
Archived-At: <https://mailarchive.ietf.org/arch/msg/isis-wg/5eeXo5Tw_5Hu87ET2o2Rjtk0kUQ>
Subject: Re: [Isis-wg] WG Last Call for draft-ietf-isis-reverse-metric-07
X-BeenThere: isis-wg@ietf.org
X-Mailman-Version: 2.1.22
Precedence: list
List-Id: IETF IS-IS working group <isis-wg.ietf.org>
List-Unsubscribe: <https://www.ietf.org/mailman/options/isis-wg>, <mailto:isis-wg-request@ietf.org?subject=unsubscribe>
List-Archive: <https://mailarchive.ietf.org/arch/browse/isis-wg/>
List-Post: <mailto:isis-wg@ietf.org>
List-Help: <mailto:isis-wg-request@ietf.org?subject=help>
List-Subscribe: <https://www.ietf.org/mailman/listinfo/isis-wg>, <mailto:isis-wg-request@ietf.org?subject=subscribe>
X-List-Received-Date: Thu, 18 Jan 2018 18:36:05 -0000

Hi Naiming,

Yes, my point is that reverse-metric values 2^24-2 and 2^24-1 are special-purpose values for which operation “set” should be applied rather than “add”. For other values (below 2^24-2) operation “add” is performed with the rule ‘min(sum, 2^24-2)’.

Thank you.

Best regards,
Alexander Okonnikov

18 янв. 2018 г., 21:30 +0300, Naiming Shen (naiming) <naiming@cisco.com>om>, писал:
>
> Hi Alexander,
>
> As mentioned, the ‘reverse-metric’ is an ‘Offset metric’, and it’s accumulative on the receiving
> end. So when you send (2^24-2) over, unless the other side is configured on interface of
> IS-IS metric of zero (which is the case on Pnode), then you are not going to deterministically
> for the case of (2^24-2) vs (2^24-1) as a result. The ‘U’ bit is for setting that top limit for neighbor.
> Thus in the mobility use case, without knowing the other side configured metric, this side
> can do ‘1’, ‘2’, ‘etc’ to gradually increase the “inbound” metric towards itself.
>
> If this were an ‘absolute’ value for the other side to install regardless of their configured metric,
> then you are right.
>
> thanks.
> - Naiming
>
> > On Jan 18, 2018, at 1:50 AM, Alexander Okonnikov <alexander.okonnikov@gmail.com> wrote:
> >
> > Hi Naiming,
> >
> > For signaling unreachability of the link to ISs outside that link we don't need utilize U-bit in IIH. When receiving IS observes that IGP or TE reverse metric is 2^24-1, it sets its operational forward metric to 2^24-1 as well and signals it in its LSP, without redundant signaling via U-bit in received IIH. As a consequence, other ISs become aware about unreachability of the link (in fact about unreachability of the link for IGP and TE topologies). This is the same I proposed to do without U-bit. One detail about U-bit I am confused is that U-bit signals that both metrics (IGP and TE) should be maximized, irrespectively to values of metrics in Offset field and in TE Default Metric Sub-TLV (the latter may not be present at all).
> >
> > This is not needed to allocate new bit to signal that metric value must not exceed 2^24-1. Values of both kinds of metric are signaled using 24-bit fields in LSP, so it is not possible to advertise values greater than 2^24-1. If sum of forward + reverse metric is greater than 2^24-1, it should be set by receiver to 2^24-1, like it is being done for 'last resort' mode, described in section 3.1, where metric value must not be greater than 2^24-2.
> >
> > Follow is my proposal in examples without U-bit:
> >
> > 1. Originator wishes to make link last resort for IGP, but not TE:
> >
> > Originator sets Metric Offset value to 2^24-2. TE reverse metric is not advertised or advertised with value 0.
> > Receiver sets its IGP metric to 2^24-2 (even if its IGP forward metric is >=1). Receiver's TE metric is not modified.
> >
> > 2. Originator wishes to make link last resort for TE, but not IGP:
> >
> > Originator sets TE reverse metric to 2^24-2. Metric Offset value is 0.
> > Receiver sets its TE metric to 2^24-2 (even if its TE forward metric is >=1). Receiver's IGP metric is not modified.
> >
> > 3. Originator wishes to make link last resort for both IGP and TE:
> >
> > Originator sets Metric Offset and TE metric values to 2^24-2.
> > Receiver sets its IGP and TE metrics to 2^24-2 (even if its IGP and TE forward metrics are >=1).
> >
> > 4. Originator wishes to make link unreachable for IGP, but not TE:
> >
> > Originator sets Metric Offset value to 2^24-1. TE reverse metric is not advertised or advertised with value 0.
> > Receiver sets its IGP metric to 2^24-1 (irrespectively to its IGP forward metric). Receiver's TE metric is not modified.
> >
> > 5. Originator wishes to make link unreachable for TE, but not IGP:
> >
> > Originator sets TE reverse metric to 2^24-1. Metric Offset value is 0.
> > Receiver sets its TE metric to 2^24-1 (irrespectively to its TE forward metric). Receiver's IGP metric is not modified.
> >
> > 6. Originator wishes to make link unreachable for both IGP and TE:
> >
> > Originator sets Metric Offset and TE metric values to 2^24-1.
> > Receiver sets its IGP and TE metrics to 2^24-1 (irrespectively to its IGP and TE forward metrics).
> > Thank you.
> >
> > 16.01.2018 09:46, Naiming Shen (naiming) пишет:
> > >
> > > Hi Alexander,
> > >
> > > The reason we share that ‘U' bit, first of all, this is a bit on the link, not in LSP,
> > > unless the LSP propagates the meaning, no one outside knows about that.
> > > So, it is important to have the neighbor to raise the metric for both IGP and TE
> > > to indicate something for both metric.
> > > 2nd, the ‘U’-bit just indicate the max can be upto 2^24-1. if the accumulated
> > > metric of configured plus the ‘reverse’ is >= 2^24-1. If one wants to have
> > > one is usable and the other is unusable, that is easy, send in ‘reverse-metric' TLV
> > > for the normal metric to be zero, and the ‘reverse-metric’ TE sub-TLV metric
> > > to be ‘2^24-1’, that will achevie exact the effect, and set the ‘U’ bit.
> > > The other way around is also the same.
> > >
> > > thanks.
> > > - Naiming
> > >
> > > > On Jan 15, 2018, at 10:21 PM, Alexander Okonnikov <alexander.okonnikov@gmail.com> wrote:
> > > >
> > > > Hi Naiming, Les, Chris,
> > > >
> > > > Version -08 specifies new U-bit to be used simultaneously both for IGP and TE metrics. It seems to be suboptimal. What if the goal is to modify IGP link properties while left TE link properties intact? U-bit set says that both - IGP and TE metrics - should be maximized on receiving IS. From CSPF perspective there is no much difference between TE metrics 2^24-2 and 2^24-1 - they are both indicate ‘last resort’ but still ‘usable’ link. For TE metric manipulation we have reverse TE Default Metric Sub-TLV and don’t need U-bit. For making IGP link unusable we have special reverse-metric value 2^24-1 and don’t need U-bit as well. If the draft will state that TE metric 2^24-1 should indicate TE link as unusable (from CSPF perspective), reverse TE metric 2^24-1 could be specified as special value for this like it is specified for IGP link.
> > > >
> > > > Thanks.
> > > >
> > > > Best regards,
> > > > Alexander Okonnikov
> > > >
> > > > 11 янв. 2018 г., 23:45 +0300, Les Ginsberg (ginsberg) <ginsberg@cisco.com>om>, писал:
> > > > > I agree with Naiming on these changes.
> > > > >
> > > > > Originally I was opposed to the use of max_metric-1 by reverse metric as with the new bit defined in link attributes there was no need. But Naiming has pointed out that in order for the new link attribute bit to be effective all routers have to be upgraded to support it. His proposal of being able to optionally set max_metric-1 means that even routers who do not support reverse_metric will avoid the link in question simply because they will respond to the large advertised metric at both ends of the link.
> > > > >
> > > > > Allowing max_metric-1 means the link can be completely removed from the IGP topology in both directions in a backwards compatible way.
> > > > > While max_metric-1 is NOT defined as "do not use" for the TE topology, it does make the link very unattractive to any C-SPF which considers metric - and so achieves what is desired - again in a backwards compatible way.
> > > > >
> > > > > I think this is a significant improvement.
> > > > >
> > > > > Many thanks to Naiming for realizing all of the downsides of using the new link attribute bit.
> > > > >
> > > > > Les
> > > > >
> > > > >
> > > > > > -----Original Message-----
> > > > > > From: Naiming Shen (naiming)
> > > > > > Sent: Thursday, January 11, 2018 12:20 PM
> > > > > > To: Christian Hopps <chopps@chopps.org
> > > > > > Cc: Les Ginsberg (ginsberg) <ginsberg@cisco.com>om>; isis-wg@ietf.org; isis-
> > > > > > ads@ietf.org
> > > > > > Subject: Re: [Isis-wg] WG Last Call for draft-ietf-isis-reverse-metric-07
> > > > > >
> > > > > >
> > > > > > Hi Chris,
> > > > > >
> > > > > > > On Jan 11, 2018, at 1:19 AM, Christian Hopps <chopps@chopps.org> wrote:
> > > > > > >
> > > > > > >
> > > > > > > Naiming Shen (naiming) <naiming@cisco.com> writes:
> > > > > > >
> > > > > > > > Hi,
> > > > > > > >
> > > > > > > > Sounds reasonable. At this stage of the draft, we’ll probably skip
> > > > > > > > this capability. If it is found needed later, it can be added easily.
> > > > > > > > I suspect there are a number of other things can be later ride on top of
> > > > > > this.
> > > > > > >
> > > > > > > Hi Naiming,
> > > > > > >
> > > > > > > Correct me if I'm wrong, but aren't you saying here that you would not
> > > > > > > add the 2^24-1 functionality? I'm asking b/c you also just published a
> > > > > > > new version -08 that appears to add this functionality. :)
> > > > > > >
> > > > > > > Was there any off-list discussion that led to the change of heart?
> > > > > >
> > > > > > Actually, this is not really a new functionality of the draft:-) We also removed
> > > > > > the section 3.6 “Link Overload Attribute Bit” of sub-TLV of TLV 22 in the LSP.
> > > > > > This change is due to several factors:
> > > > > >
> > > > > > - the long discusion ongoing of OSPF mailing list of the name “overload”,
> > > > > > which has disagreement on what does this “overload” really meant, and
> > > > > > what to do if it’s “overloaded”. This version 7 borrowed this from OSPF, and
> > > > > > now we got requests also to reconsider the name of this “Link Overload
> > > > > > Attribute Bit”
> > > > > >
> > > > > > - More importantly we just realized that, to use this “overload” bit in LSP, the
> > > > > > backwards compatibility is not possible anymore, as in the other “reverse-
> > > > > > metric” feature which is all local to the link. So, if we have to use this
> > > > > > “overload” bit in LSP, we have also to define the router “capabilities” to
> > > > > > advertise this, and synchronize among area/domain, which we really don’t
> > > > > > want to do in ‘reverse-metric'
> > > > > >
> > > > > > - Third with this “U” bit, it achieves the same effect of the “overload” bit,
> > > > > > since the neighbor can optionally set the (2^24-1) and take out the link as
> > > > > > ‘unusable’ for IGP or TE, while at the mean time keep the same backwards
> > > > > > compatibility in the area/domain, which is a very clean solution.
> > > > > >
> > > > > > - I have had long email/chat discussion on this with Les, since we have seen
> > > > > > the email, this (2^24-1) has been part of the comments discussion during the
> > > > > > last call. and at the time I didn’t think clearly and mentioned on the list we
> > > > > > wouldn't do that, but with all the above mentioned reasons, we decided that
> > > > > > is the right way to go. As mentioned, the reason of doing that is not to handle
> > > > > > the multi-area LDP/IGP sync kind of use-case, but to support TE topology to
> > > > > > take the link out just as in the removed section 3.6 in ver 7.
> > > > > >
> > > > > > thanks.
> > > > > > - Naiming
> > > > > >
> > > > > > >
> > > > > > > Thanks,
> > > > > > > Chris.
> > > > > > >
> > > > > > > > Regards,
> > > > > > > > - Naiming
> > > > > > > >
> > > > > > > > On Dec 30, 2017, at 4:05 PM, Les Ginsberg (ginsberg)
> > > > > > <ginsberg@cisco.com<mailto:ginsberg@cisco.com>> wrote:
> > > > > > > >
> > > > > > > >
> > > > > > > >
> > > > > > > > From: Alexander Okonnikov [mailto:alexander.okonnikov@gmail.com]
> > > > > > > > Sent: Saturday, December 30, 2017 3:34 PM
> > > > > > > > To: Les Ginsberg (ginsberg)
> > > > > > > > <ginsberg@cisco.com<mailto:ginsberg@cisco.com
> > > > > > > > Cc: Naiming Shen (naiming)
> > > > > > > > <naiming@cisco.com<mailto:naiming@cisco.com>>;
> > > > > > > > isis-wg@ietf.org<mailto:isis-wg@ietf.org>; Christian Hopps
> > > > > > > > <chopps@chopps.org<mailto:chopps@chopps.org>>;
> > > > > > > > isis-ads@ietf.org<mailto:isis-ads@ietf.org
> > > > > > > > Subject: Re: [Isis-wg] WG Last Call for
> > > > > > > > draft-ietf-isis-reverse-metric-07
> > > > > > > >
> > > > > > > > Les,
> > > > > > > >
> > > > > > > >
> > > > > > > > 31 дек. 2017 г., в 2:25, Les Ginsberg (ginsberg)
> > > > > > <ginsberg@cisco.com<mailto:ginsberg@cisco.com>> написал(а):
> > > > > > > >
> > > > > > > > Alex -
> > > > > > > >
> > > > > > > > From: Alexander Okonnikov [mailto:alexander.okonnikov@gmail.com]
> > > > > > > > Sent: Saturday, December 30, 2017 3:06 PM
> > > > > > > > To: Les Ginsberg (ginsberg)
> > > > > > > > <ginsberg@cisco.com<mailto:ginsberg@cisco.com
> > > > > > > > Cc: Naiming Shen (naiming)
> > > > > > > > <naiming@cisco.com<mailto:naiming@cisco.com>>;
> > > > > > > > isis-wg@ietf.org<mailto:isis-wg@ietf.org>; Christian Hopps
> > > > > > > > <chopps@chopps.org<mailto:chopps@chopps.org>>;
> > > > > > > > isis-ads@ietf.org<mailto:isis-ads@ietf.org
> > > > > > > > Subject: Re: [Isis-wg] WG Last Call for
> > > > > > > > draft-ietf-isis-reverse-metric-07
> > > > > > > >
> > > > > > > > Les,
> > > > > > > >
> > > > > > > >
> > > > > > > >
> > > > > > > > 31 дек. 2017 г., в 1:48, Les Ginsberg (ginsberg)
> > > > > > <ginsberg@cisco.com<mailto:ginsberg@cisco.com>> написал(а):
> > > > > > > >
> > > > > > > > Alex -
> > > > > > > >
> > > > > > > > From: Alexander Okonnikov [mailto:alexander.okonnikov@gmail.com]
> > > > > > > > Sent: Saturday, December 30, 2017 2:38 PM
> > > > > > > > To: Les Ginsberg (ginsberg)
> > > > > > > > <ginsberg@cisco.com<mailto:ginsberg@cisco.com
> > > > > > > > Cc: Naiming Shen (naiming)
> > > > > > > > <naiming@cisco.com<mailto:naiming@cisco.com>>;
> > > > > > > > isis-wg@ietf.org<mailto:isis-wg@ietf.org>; Christian Hopps
> > > > > > > > <chopps@chopps.org<mailto:chopps@chopps.org>>;
> > > > > > > > isis-ads@ietf.org<mailto:isis-ads@ietf.org
> > > > > > > > Subject: Re: [Isis-wg] WG Last Call for
> > > > > > > > draft-ietf-isis-reverse-metric-07
> > > > > > > >
> > > > > > > > Hi Les,
> > > > > > > >
> > > > > > > > Don't advertise link and advertise it with metric 2^24-1 makes sense again.
> > > > > > In the former case that link cannot be used for TE LSPs, while in latter one it is
> > > > > > possible. This is also described in RFC 5305:
> > > > > > > >
> > > > > > > > " If a link is advertised with the maximum link metric (2^24 - 1), this
> > > > > > > > link MUST NOT be considered during the normal SPF computation. This
> > > > > > > > will allow advertisement of a link for purposes other than building
> > > > > > > > the normal Shortest Path Tree. An example is a link that is
> > > > > > > > available for traffic engineering, but not for hop-by-hop routing."
> > > > > > > >
> > > > > > > > [Les:] I am well aware of this. My comment regarding (2^24 - 1) is in the
> > > > > > context of reverse metric. If the reason that you want to advertise (2^24-1) is
> > > > > > because the link is only supposed to be used for TE purposes then this would
> > > > > > already have been done by the neighbor as part of their configuration – and
> > > > > > it has nothing to do with adjacency bringup.
> > > > > > > > Idea was to temporarily disable IP forwarding on the link while preserve
> > > > > > ability to use link for other transport. An example when we need it - IGP-LDP
> > > > > > sync. If you configure 2^24-1 on the neighbor, then link will be excluded from
> > > > > > IP topology permanently. Also, it is not clear for me how it could be done on
> > > > > > LAN.
> > > > > > > >
> > > > > > > >
> > > > > > > > [Les:] My point is – if you do not want the link to be used at all – even if
> > > > > > only while waiting for LDP sync to complete – then you simply don’t advertise
> > > > > > the adjacency. In the case of the LAN you don’t advertise the adjacency to
> > > > > > the DIS – so there is no 2-way connectivity on that circuit and no traffic flows
> > > > > > to/from the node via the interface in question. It does not matter what the
> > > > > > neighbor/DIS is advertising.
> > > > > > > > My point - to have ability to exclude link from IP topology, but still use it in
> > > > > > other topologies. This could be done by advertising metric 2^24-1. If
> > > > > > adjacency is not advertised, then that link is excluded from all topologies, not
> > > > > > only from IP. In general my proposal is to make reverse-metric functionality
> > > > > > as flexible as possible and to don't restrict it deliberately.
> > > > > > > >
> > > > > > > > [Les:] This is exactly what I object to. Reverse-metric is not and should not
> > > > > > be a general purpose mechanism to have one node override the
> > > > > > configuration of its neighbors for any and all possible reasons. It has well
> > > > > > defined use cases which the draft describes and its use should be limited to
> > > > > > those cases.
> > > > > > > >
> > > > > > > > The additional use cases you have suggested can already be handled by
> > > > > > existing mechanisms which are local to each node and that should always be
> > > > > > the preferred means. The potential for chaos that results when each node
> > > > > > utilizes this mechanism to adjust the SPF outcome on other routers based on
> > > > > > its local view of the current state of convergence is not something I want to
> > > > > > embrace.
> > > > > > > >
> > > > > > > > Les
> > > > > > > >
> > > > > > > >
> > > > > > > >
> > > > > > > > Regarding L1 circuit between L1/L2 routers - it is not always possible or is
> > > > > > not desired.
> > > > > > > >
> > > > > > > > [Les:] I was covering the example you provided. It was clear from your
> > > > > > example that although L2 only was enabled between the L1/L2 routers, you
> > > > > > were allowing intra-area traffic to flow over that link.
> > > > > > > > If you do not want intra-area traffic to flow over that link at all, then you
> > > > > > need to insure that L1 destinations are not leaked into L2 – in which case the
> > > > > > proposed change you are suggesting for reverse-metric would not help.
> > > > > > > >
> > > > > > > > If you think you have a different example that justifies your proposal I
> > > > > > would be happy to review it – but the one you have come up with isn’t
> > > > > > compelling.
> > > > > > > > Two L1/L2 routers could be geographically dispersed.
> > > > > > > > [Les:] Only if the L1/L2 routers are in different areas – in which case your
> > > > > > example does not apply.
> > > > > > > > Not necessary. There could be area represented by sub-ring physical
> > > > > > topology.
> > > > > > > >
> > > > > > > >
> > > > > > > > There could be L2 subdomain which provides L2 path between them. But
> > > > > > sometimes it is not optimal to configure L1/L2 on all transit L2 routers
> > > > > > between two ones. Also, for redundancy you will need to provide alternative
> > > > > > L1 path in the core (to avoid routing traffic via access).
> > > > > > > >
> > > > > > > > Another case, when having looped L1 is not desired - when R3 has
> > > > > > reachability to the network via two ABRs (R1 and R2), and R2 is closer to R3
> > > > > > than R1 to R3. In case link (path) from R3 to R2 is broken, it is more optimal
> > > > > > from data path perspective to reroute traffic to R1 rather than to R2 via R1. It
> > > > > > is not case for regular IP routing, but becomes sensitive when we have deal
> > > > > > with L2VPN services, such that MS-PW or H-VPLS, where R1 and R2 are S-PEs
> > > > > > or Hub PEs, respectively.
> > > > > > > >
> > > > > > > > [Les:] We are not discussing all possible network topologies. The topic
> > > > > > here is the Reverse-Metric draft and whether there is a use case for a node
> > > > > > to tell its neighbor to advertise max-metric (2^24-1).
> > > > > > > > Please stay on topic. If you have an example that justifies your proposal I
> > > > > > would like to hear it – but please stay focused on this use case.
> > > > > > > >
> > > > > > > > Les
> > > > > > > >
> > > > > > > >
> > > > > > > >
> > > > > > > > Les
> > > > > > > >
> > > > > > > > Thank you.
> > > > > > > >
> > > > > > > >
> > > > > > > >
> > > > > > > >
> > > > > > > > 31 дек. 2017 г., в 1:33, Les Ginsberg (ginsberg)
> > > > > > <ginsberg@cisco.com<mailto:ginsberg@cisco.com>> написал(а):
> > > > > > > >
> > > > > > > > I strongly disagree with this proposed change.
> > > > > > > >
> > > > > > > > If you want to take the link totally out of the topology then simply don’t
> > > > > > advertise the adjacency. This works for both P2P and LAN cases.
> > > > > > > > This is why the draft states
> > > > > > > >
> > > > > > > > “a receiver of a
> > > > > > > > Reverse Metric TLV MUST use the numerically smallest value of either
> > > > > > > > the sum of its existing default metric and the Metric Offset value in
> > > > > > > > the Reverse Metric TLV or (2^24 - 2)”
> > > > > > > >
> > > > > > > > There is no use case for (2^24 - 1).
> > > > > > > >
> > > > > > > > As for the L1/L2 example topology that Alex used to justify his proposal,
> > > > > > there is a much better way to prevent the premature use of the L1 link. That
> > > > > > is to enable L1 on the link between the two L1L2 routers but configure a
> > > > > > larger metric (e.g. 100000) so that the L1/L2 link will only be used for L1 traffic
> > > > > > when there is no viable L1 only link. There is no need to use Reverse-Metric
> > > > > > to do so and I believe this is an inappropriate use of this extension.
> > > > > > > >
> > > > > > > > Les
> > > > > > > >
> > > > > > > >
> > > > > > > > From: Isis-wg [mailto:isis-wg-bounces@ietf.org] On Behalf Of Naiming
> > > > > > > > Shen (naiming)
> > > > > > > > Sent: Saturday, December 30, 2017 11:59 AM
> > > > > > > > To: Alexander Okonnikov
> > > > > > > >
> > > > > > <alexander.okonnikov@gmail.com<mailto:alexander.okonnikov@gmail.com
> > > > > > > >
> > > > > > > > Cc: isis-wg@ietf.org<mailto:isis-wg@ietf.org>; Christian Hopps
> > > > > > > > <chopps@chopps.org<mailto:chopps@chopps.org>>;
> > > > > > > > isis-ads@ietf.org<mailto:isis-ads@ietf.org
> > > > > > > > Subject: Re: [Isis-wg] WG Last Call for
> > > > > > > > draft-ietf-isis-reverse-metric-07
> > > > > > > >
> > > > > > > >
> > > > > > > > Hi Alex,
> > > > > > > >
> > > > > > > > Ok. We’ll add a bit to the flag (the 2nd bit) of the ‘reverse-metric
> > > > > > > > TLV’, to indicate the originator requesting the inbound direction of
> > > > > > > > the link not to be used and the metric should be raised by the peer to
> > > > > > (2^24 - 1) regardless the value of the ‘offset metric’
> > > > > > > > value in the TLV.
> > > > > > > >
> > > > > > > > thanks.
> > > > > > > > - Naiming
> > > > > > > >
> > > > > > > > On Dec 29, 2017, at 11:46 AM, Alexander Okonnikov
> > > > > > <alexander.okonnikov@gmail.com<mailto:alexander.okonnikov@gmail.com
> > > > > > > > wrote:
> > > > > > > >
> > > > > > > > Hi Naiming,
> > > > > > > >
> > > > > > > >
> > > > > > > >
> > > > > > > >
> > > > > > > >
> > > > > > > > 29 дек. 2017 г., в 6:10, Naiming Shen (naiming)
> > > > > > <naiming@cisco.com<mailto:naiming@cisco.com>> написал(а):
> > > > > > > >
> > > > > > > >
> > > > > > > > Hi Alexander,
> > > > > > > >
> > > > > > > > Thanks for the comments, see more replies inline.
> > > > > > > >
> > > > > > > >
> > > > > > > >
> > > > > > > >
> > > > > > > >
> > > > > > > > On Dec 14, 2017, at 9:24 AM, Alexander Okonnikov
> > > > > > <alexander.okonnikov@gmail.com<mailto:alexander.okonnikov@gmail.com
> > > > > > > > wrote:
> > > > > > > >
> > > > > > > > Hi authors,
> > > > > > > >
> > > > > > > >
> > > > > > > > I have some comments below regarding the draft:
> > > > > > > >
> > > > > > > >
> > > > > > > > 1) Section 2: "There is currently only two Flag bits defined." Per -07 only
> > > > > > one flag is defined. S flag was deprecated since version -06 (implicit signaling
> > > > > > of presence of Sub-TLVs is used via "Sub-TLV Len" field non-zero value. Text
> > > > > > in the beginning of the chapter 2 about flag S is to be removed as well.
> > > > > > > >
> > > > > > > > NS> will fix.
> > > > > > > >
> > > > > > > >
> > > > > > > >
> > > > > > > >
> > > > > > > >
> > > > > > > >
> > > > > > > > 2) Section 3.1: "In order to ensure that an individual TE link is used as a link
> > > > > > of last resort during SPF computation, ..." I guess that you meant regular link
> > > > > > rather than TE link.
> > > > > > > >
> > > > > > > > 3) For the same section: Per my understanding, this section assumes that
> > > > > > overloaded link will always be considered as last-resort link. I.e. it cannot be
> > > > > > excluded from topology (as link with metric 2^24-1), unless originator of the
> > > > > > TLV sets appropriate bit in corresponding Link Attributes Sub-TLV (RFC 5029)
> > > > > > AND receiving ISs support that Sub-TLV. As alternative it could be done by
> > > > > > allowing for originator to specify reverse metric special value 2^24-1 which
> > > > > > would indicate to receivers that the link is to be excluded from topology
> > > > > > completely rather than used as last resort. If reverse metric value is between
> > > > > > 0 - 2^24-2 then link could be used in path calculation. The same rules for TE
> > > > > > metric.
> > > > > > > >
> > > > > > > >
> > > > > > > > NS> I don’t see there is much difference between not used or last resort
> > > > > > in the use cases we mentioned.
> > > > > > > > also, this metric value is an ‘offset metric’ being added on top of
> > > > > > > > the existing local metric. It would not be always feasible to make the
> > > > > > reverse-metric off by one to mean two completely different operations.
> > > > > > > >
> > > > > > > > One use case when unusable link vs last resort one makes sense is for
> > > > > > > > IGP-LDP sync. Let's assume we have two-level IS-IS domain. There are
> > > > > > > > three ISs in the domain: R1 and R2 are L1/L2 ISs, and R3 is L1-only.
> > > > > > > > R1 and R2 are connected to each other via L2 circuit, and R3 is
> > > > > > > > connected to R1 and R2 via L1 circuits. The link between R2 and R3
> > > > > > > > was broken and now is being restored. While adjacency has not been
> > > > > > > > established on failed link, R3 has inter-area route towards R2's
> > > > > > > > loopback. Once adjacency has been established, but LDP session has
> > > > > > > > not yet, R3 and R2 maximize metric (2^24-2) on corresponding link.
> > > > > > > > But now R2 and R3 have routes to each other as L1 intra-area, though
> > > > > > > > with max metric. Because L1 intra-area route wins, R2 and R3 replace
> > > > > > > > inter-area routes to each other by intra-area ones. As a result, LDP
> > > > > > > > LSPs are blackholed. On the other hand, if two routers mark
> > > > > > > > corresponding link as unusable (with metric 2^24-1), they would use
> > > > > > > > inter-area routes until IGP-LDP sync will be com
> > > > > > > pleted.
> > > > > > > >
> > > > > > > > An IS can make decision on whether to mark link as unusable or as last
> > > > > > resort, using the same principle as proposed in RFC 6138.
> > > > > > > >
> > > > > > > >
> > > > > > > >
> > > > > > > >
> > > > > > > >
> > > > > > > >
> > > > > > > >
> > > > > > > >
> > > > > > > >
> > > > > > > >
> > > > > > > > 4) For the same section: The draft says that if originator uses narrow
> > > > > > metric-type, it should use value 63 as max-metric. But on receiving reverse
> > > > > > metric with such value receivers have no idea whether this is "narrow" max-
> > > > > > metric or offset 63 for "wide" metric. I.e. the draft assumes that all ISs use
> > > > > > the same type of metric, and using of two metric types at the same time is
> > > > > > not covered. May be it would be appropriate to define two Reverse Metric
> > > > > > TLVs, like IS Neighbors TLV and Extended IS Reachability TLV. Or to specify
> > > > > > new flag to mark type of the reverse metric.
> > > > > > > >
> > > > > > > >
> > > > > > > > NS> to be simple, we have to assume a network is either run wide or
> > > > > > > > NS> narrow. It can not be fixed. The
> > > > > > > > document is trying to be complete to mention the ‘narrow’ case.
> > > > > > > >
> > > > > > > >
> > > > > > > >
> > > > > > > >
> > > > > > > >
> > > > > > > >
> > > > > > > > 5) For the same section: It is not clear for me why DIS should use min(63,
> > > > > > (Metric + Reverse Metric)) while composing pseudonode LSP. If DIS is
> > > > > > configured for using "wide" metric-type, it will use Extended IS Reachability
> > > > > > TLVs for describing its neighbors. Moreover, in this case DIS is not obligated
> > > > > > to still insert IS Neighbors TLVs in its Pseudonode LSP (in addition to
> > > > > > Extended IS Reachability TLVs) when it is configured for "wide-only" mode.
> > > > > > > >
> > > > > > > > NS> agreed. will remove this, to keep the same goal as above, to be
> > > > > > simple. Not to mix them.
> > > > > > > >
> > > > > > > >
> > > > > > > >
> > > > > > > >
> > > > > > > >
> > > > > > > >
> > > > > > > > 6) For the same section: It is not clear for me why in case when TE metric
> > > > > > offset is not advertised in Reverse Metric TLV, receiving IS must modify its TE
> > > > > > metric by adding IGP reverse metric value. In my mind, it would be
> > > > > > straightforward to use follow rule: if originator doesn't include TE metric part
> > > > > > then it doesn't wish to overload TE link, but only IGP link. For example,
> > > > > > originator advertises Reverse metric TLV as part of IGP-LDP synchronization
> > > > > > procedure (section 3.5). It is not reason to impact TE properties (metric in this
> > > > > > case) of the link. Hence, originator could advertise Reverse metric TLV
> > > > > > without TE metric Sub-TLV, in order to signal that "TE metric is left intact”.
> > > > > > > >
> > > > > > > > NS> sounds resonable. Will change this to say if the sub-TLV of TE is
> > > > > > > > NS> not received, the TE properties will not change
> > > > > > > > by receiving this ‘reverse-metric’ TLV.
> > > > > > > >
> > > > > > > >
> > > > > > > >
> > > > > > > >
> > > > > > > >
> > > > > > > >
> > > > > > > > 7) Section 3.3: The draft is not clear about handling of TE metric by DIS.
> > > > > > Usually DIS implementations don't insert TE Sub-TLVs into Extended IS
> > > > > > Reachability TLVs in Pseudonode LSP. May be it would be better to add
> > > > > > explicit text that: if DIS receives TE metric Sub-TLV in Reverse Metric TLV it
> > > > > > should update TE Default Metric Sub-TLV value of corresponding Extended IS
> > > > > > Reachability TLV OR insert new one if it was not present there.
> > > > > > > >
> > > > > > > > NS> To me, there is not much difference between DIS and other nodes.
> > > > > > Will try to add some words to that.
> > > > > > > >
> > > > > > > > thanks.
> > > > > > > > - Naiming
> > > > > > > >
> > > > > > > >
> > > > > > > >
> > > > > > > >
> > > > > > > >
> > > > > > > >
> > > > > > > >
> > > > > > > > Thanks!
> > > > > > > >
> > > > > > > >
> > > > > > > > 30.11.2017 01:47, Naiming Shen (naiming) пишет:
> > > > > > > >
> > > > > > > >
> > > > > > > >
> > > > > > > >
> > > > > > > > Hi Ketan,
> > > > > > > >
> > > > > > > > thanks for the support and comments. some clarification inline,
> > > > > > > >
> > > > > > > >
> > > > > > > >
> > > > > > > >
> > > > > > > >
> > > > > > > > On Nov 28, 2017, at 11:54 PM, Ketan Talaulikar (ketant)
> > > > > > <ketant@cisco.com<mailto:ketant@cisco.com>> wrote:
> > > > > > > >
> > > > > > > > Hello,
> > > > > > > >
> > > > > > > > I support this draft, however would like the following aspect/scenario
> > > > > > clarified.
> > > > > > > >
> > > > > > > > Consider the scenario where both the neighbours on a p2p link initiate the
> > > > > > reverse metric procedure (i.e. include the TLV in their hellos concurrently).
> > > > > > How are implementations supposed to handle this? Normally the choice of
> > > > > > metric conveyed via this TLV is based on a particular condition (which need
> > > > > > not just be "overload") on the local router which requires the neighbour to
> > > > > > use shift to using the reverse metric supplied. So when both neighbours
> > > > > > initiate this process, it would be good to have the specification provide a
> > > > > > deterministic behaviour since the reverse metric values provided may
> > > > > > conflict in certain "non-overload" conditions. If both routers simply accept
> > > > > > the value supplied by their neighbour, it may not achieve the original
> > > > > > purpose/design of this triggering this mechanism?
> > > > > > > > When you say if both sides initiated this ‘reverse metric’, you
> > > > > > > > implied there is a timing issue with this procedure in the draft.
> > > > > > > >
> > > > > > > > The value of this ‘metric offset’ (or whatever will be called) of
> > > > > > > > this TLV, is just a number. The draft does not say this number is
> > > > > > > > equal to the configured ‘metric’ value plus the received ‘reverse
> > > > > > > > metrc’ value, that would be non-deterministic and both sides would
> > > > > > > > keep going up until it’s
> > > > > > > > overloaded:-)
> > > > > > > >
> > > > > > > > Each side of IS-IS link decides if it needs to send a ‘reverse
> > > > > > > > metric’ over the link, either in link-overloading case, or other
> > > > > > > > cases. It’s a static number, it does not depend on the other side
> > > > > > > > sending a ‘reverse metric’ or not. This both sides sending a
> > > > > > > > ‘reverse-metric’ over a link is equivalent to an operator provisions
> > > > > > > > new metric (say both plus 10 to the old metric) on both sides of the link at
> > > > > > the same time, there is no non-determinitic thing in this.
> > > > > > > >
> > > > > > > > thanks.
> > > > > > > > - Naiming
> > > > > > > >
> > > > > > > >
> > > > > > > >
> > > > > > > >
> > > > > > > >
> > > > > > > > Following options come to my mind:
> > > > > > > > a) when this condition is detected, none of the routers actually
> > > > > > > > apply the reverse metric procedure
> > > > > > > > b) when this condition is detected, the router with higher/lower
> > > > > > > > system-id value (or some such tiebreaker) wins and the other
> > > > > > > > withdraws its reverse metric (until then (a) applies)
> > > > > > > > c) some mechanism/rule that is based on the value of metric offset
> > > > > > specified perhaps (made harder since the actual metric is not signalled but
> > > > > > the offset) which determines the "winner" so the other withdraws their TLV.
> > > > > > > >
> > > > > > > > Since the mechanism is not specific to overload conditions (where this is
> > > > > > not an issue), it may be necessary for the specification to clarify this
> > > > > > behaviour to ensure interoperability.
> > > > > > > >
> > > > > > > > Thanks,
> > > > > > > > Ketan
> > > > > > > >
> > > > > > > > -----Original Message-----
> > > > > > > > From: Isis-wg [mailto:isis-wg-bounces@ietf.org] On Behalf Of
> > > > > > > > Christian Hopps
> > > > > > > > Sent: 16 November 2017 04:13
> > > > > > > > To: isis-wg@ietf.org<mailto:isis-wg@ietf.org
> > > > > > > > Cc: isis-ads@ietf.org<mailto:isis-ads@ietf.org
> > > > > > > > Subject: [Isis-wg] WG Last Call for draft-ietf-isis-reverse-metric-07
> > > > > > > >
> > > > > > > >
> > > > > > > > The authors have asked for and we are starting a WG Last Call on
> > > > > > > >
> > > > > > > > https://datatracker.ietf.org/doc/draft-ietf-isis-reverse-metric/
> > > > > > > >
> > > > > > > > which will last an extended 3 weeks to allow for IETF100.
> > > > > > > >
> > > > > > > > Thanks,
> > > > > > > > Chris.
> > > > > > > >
> > > > > > > > _______________________________________________
> > > > > > > > Isis-wg mailing list
> > > > > > > > Isis-wg@ietf.org<mailto:Isis-wg@ietf.org
> > > > > > > > https://www.ietf.org/mailman/listinfo/isis-wg
> > > > > > > >
> > > > > > > > _______________________________________________
> > > > > > > > Isis-wg mailing list
> > > > > > > > Isis-wg@ietf.org<mailto:Isis-wg@ietf.org
> > > > > > > > https://www.ietf.org/mailman/listinfo/isis-wg
> > > > > > > > _______________________________________________
> > > > > > > > Isis-wg mailing list
> > > > > > > > Isis-wg@ietf.org<mailto:Isis-wg@ietf.org
> > > > > > > > https://www.ietf.org/mailman/listinfo/isis-wg
> > > > > > > >
> > > > > > > >
> > > > > > > > _______________________________________________
> > > > > > > > Isis-wg mailing list
> > > > > > > > Isis-wg@ietf.org
> > > > > > > > https://www.ietf.org/mailman/listinfo/isis-wg
> > > > >
> > > > > _______________________________________________
> > > > > Isis-wg mailing list
> > > > > Isis-wg@ietf.org
> > > > > https://www.ietf.org/mailman/listinfo/isis-wg
> > >
> >
>