Re: [Isis-wg] WG Last Call for draft-ietf-isis-reverse-metric-07

"Naiming Shen (naiming)" <naiming@cisco.com> Wed, 24 January 2018 22:56 UTC

Return-Path: <naiming@cisco.com>
X-Original-To: isis-wg@ietfa.amsl.com
Delivered-To: isis-wg@ietfa.amsl.com
Received: from localhost (localhost [127.0.0.1]) by ietfa.amsl.com (Postfix) with ESMTP id 8E49312D779; Wed, 24 Jan 2018 14:56:33 -0800 (PST)
X-Virus-Scanned: amavisd-new at amsl.com
X-Spam-Flag: NO
X-Spam-Score: -9.531
X-Spam-Level:
X-Spam-Status: No, score=-9.531 tagged_above=-999 required=5 tests=[BAYES_00=-1.9, DKIM_SIGNED=0.1, DKIM_VALID=-0.1, DKIM_VALID_AU=-0.1, GB_SUMOF=5, RCVD_IN_DNSWL_HI=-5, RCVD_IN_MSPIKE_H3=-0.01, RCVD_IN_MSPIKE_WL=-0.01, SPF_PASS=-0.001, T_RP_MATCHES_RCVD=-0.01, USER_IN_DEF_DKIM_WL=-7.5] autolearn=ham autolearn_force=no
Authentication-Results: ietfa.amsl.com (amavisd-new); dkim=pass (1024-bit key) header.d=cisco.com
Received: from mail.ietf.org ([4.31.198.44]) by localhost (ietfa.amsl.com [127.0.0.1]) (amavisd-new, port 10024) with ESMTP id NgspEQDWVAhT; Wed, 24 Jan 2018 14:56:29 -0800 (PST)
Received: from alln-iport-6.cisco.com (alln-iport-6.cisco.com [173.37.142.93]) (using TLSv1.2 with cipher DHE-RSA-SEED-SHA (128/128 bits)) (No client certificate requested) by ietfa.amsl.com (Postfix) with ESMTPS id A1A4012D7E8; Wed, 24 Jan 2018 14:56:29 -0800 (PST)
DKIM-Signature: v=1; a=rsa-sha256; c=relaxed/simple; d=cisco.com; i=@cisco.com; l=35946; q=dns/txt; s=iport; t=1516834589; x=1518044189; h=from:to:cc:subject:date:message-id:references: in-reply-to:content-id:content-transfer-encoding: mime-version; bh=m55iRPuY33LVvEILUG0hi4ZM5ah/K558UOSE5KKwzYs=; b=fwlDua0m6kbaKkUafEO/QYFjuELqWx2rhe6hZoDgosrpv3HVU4txM74p tEWCNQvjvQHwo0MxfxUYWk9UOy2DpU0I5sefHoYhZUjW5qNZvq0hTsxRM VQJ/VkzLgU2fSNxL5QXQCAss0d0Jtpbp1iKaq21t2XgXUFpY+TB1TYRDe 8=;
X-IronPort-Anti-Spam-Filtered: true
X-IronPort-Anti-Spam-Result: A0D8AQDPDWla/5JdJa1eGQEBAQEBAQEBAQEBAQcBAQEBAYMRMWZ0JweDFEKKJI5ngVsniRGOLxWCAgoYC4UYAhqEZ1QYAQEBAQEBAQECayiFIwEBAQMBAQEKDgMGEToGBQUHBAIBBgIOAwQBAQECAiMDAgICHwYLFAEICAIEDgUbigIDDQgQlyydcYInh0QNgwsBAQEBAQEBAQEBAQEBAQEBAQEBAQEYBYEPg0OCFYM+ASkMgWuBDoJrRAEBAgEBgToBCwcBBy8PgnExgjQFh3uCXIdggXWFKolzPQKIEoN8g3ZVhQaCG4YfhBeHU4p5gmBGiQsCERkBgTsBHzlgcHAVPSoBgX+CVByBZ3iLWgYJGASBCYEXAQEB
X-IronPort-AV: E=Sophos;i="5.46,409,1511827200"; d="scan'208";a="60699581"
Received: from rcdn-core-10.cisco.com ([173.37.93.146]) by alln-iport-6.cisco.com with ESMTP/TLS/DHE-RSA-AES256-GCM-SHA384; 24 Jan 2018 22:56:28 +0000
Received: from XCH-RCD-005.cisco.com (xch-rcd-005.cisco.com [173.37.102.15]) by rcdn-core-10.cisco.com (8.14.5/8.14.5) with ESMTP id w0OMuR7h018750 (version=TLSv1/SSLv3 cipher=AES256-SHA bits=256 verify=FAIL); Wed, 24 Jan 2018 22:56:27 GMT
Received: from xch-rcd-004.cisco.com (173.37.102.14) by XCH-RCD-005.cisco.com (173.37.102.15) with Microsoft SMTP Server (TLS) id 15.0.1320.4; Wed, 24 Jan 2018 16:56:27 -0600
Received: from xch-rcd-004.cisco.com ([173.37.102.14]) by XCH-RCD-004.cisco.com ([173.37.102.14]) with mapi id 15.00.1320.000; Wed, 24 Jan 2018 16:56:26 -0600
From: "Naiming Shen (naiming)" <naiming@cisco.com>
To: Christian Hopps <chopps@chopps.org>
CC: "Les Ginsberg (ginsberg)" <ginsberg@cisco.com>, "isis-wg@ietf.org" <isis-wg@ietf.org>, "isis-ads@ietf.org" <isis-ads@ietf.org>
Thread-Topic: [Isis-wg] WG Last Call for draft-ietf-isis-reverse-metric-07
Thread-Index: AQHTXmMvIlsDCkaUj0W5jcon0L55haMrdnkAgAD5RwCAFzjKAIAWpEsAgAEWT4CAAZXigIAAKzoAgAABUgCAAALhAIAABQAAgAAFbACAAAJJgIAACOYAgAfnSgCACf0rgIAAuG8AgBPa4wCAAL8ZAA==
Date: Wed, 24 Jan 2018 22:56:26 +0000
Message-ID: <A2CB6FFB-7BE2-4187-9E78-DF987B6B45ED@cisco.com>
References: <87375fp3hv.fsf@chopps.org> <7185dbc2d3f34b9ea844ddef95b6278c@XCH-ALN-008.cisco.com> <481C1CEE-A8B4-4034-B016-D2673296E96B@cisco.com> <700e8fed-40fc-cb1a-1ae3-f8401f167aae@gmail.com> <DDC43BA0-7D70-4D7E-B023-A5C04E8B1B88@cisco.com> <DD26DBC2-BFA7-4EFB-B43A-048DABF3CF8A@gmail.com> <DB2AF030-53B0-4566-BF77-D1CE161406D4@cisco.com> <aea70a9bbb0c453c8f49a838b6cfc961@XCH-ALN-001.cisco.com> <B966787C-A028-4439-ACE3-2FB7B7F44AAC@gmail.com> <cb1e0ebb9e44454e900a56ad4a7b59d9@XCH-ALN-001.cisco.com> <2F941D6B-0F3F-482F-A6A6-31153FA6D311@gmail.com> <b9a735f4afba41d4be28eff333d6bb1b@XCH-ALN-001.cisco.com> <4E92E297-A6CA-4635-A60D-362C0AD864D7@gmail.com> <69982e54510942eeb3523d5a7de63fa6@XCH-ALN-001.cisco.com> <1A958D80-C689-447A-96ED-5AA365F2AF14@cisco.com> <87a7xk7nwg.fsf@chopps.org> <63627BFC-62F7-479D-B2EF-C6A7453CE6C5@cisco.com> <87efmfjxv7.fsf@chopps.org>
In-Reply-To: <87efmfjxv7.fsf@chopps.org>
Accept-Language: en-US
Content-Language: en-US
X-MS-Has-Attach:
X-MS-TNEF-Correlator:
x-ms-exchange-messagesentrepresentingtype: 1
x-ms-exchange-transport-fromentityheader: Hosted
x-originating-ip: [10.32.172.80]
Content-Type: text/plain; charset="utf-8"
Content-ID: <473DE44FE291F441874BC2BFD7B912D4@emea.cisco.com>
Content-Transfer-Encoding: base64
MIME-Version: 1.0
Archived-At: <https://mailarchive.ietf.org/arch/msg/isis-wg/jvqUuaadL4IW78AN7VcQnqWqP_U>
Subject: Re: [Isis-wg] WG Last Call for draft-ietf-isis-reverse-metric-07
X-BeenThere: isis-wg@ietf.org
X-Mailman-Version: 2.1.22
Precedence: list
List-Id: IETF IS-IS working group <isis-wg.ietf.org>
List-Unsubscribe: <https://www.ietf.org/mailman/options/isis-wg>, <mailto:isis-wg-request@ietf.org?subject=unsubscribe>
List-Archive: <https://mailarchive.ietf.org/arch/browse/isis-wg/>
List-Post: <mailto:isis-wg@ietf.org>
List-Help: <mailto:isis-wg-request@ietf.org?subject=help>
List-Subscribe: <https://www.ietf.org/mailman/listinfo/isis-wg>, <mailto:isis-wg-request@ietf.org?subject=subscribe>
X-List-Received-Date: Wed, 24 Jan 2018 22:56:34 -0000

Hi Chris,

Thanks for the comments, please see replies inline,

> On Jan 24, 2018, at 3:32 AM, Christian Hopps <chopps@chopps.org> wrote:
> 
> 
> Here are my comments on -08. The most important one would be the M-ISIS
> discrepancy.
> 
> - 3.1 " If an IS-IS router is configured to originate a TE Default  Metric
>  sub-TLV for a link, but receives a Reverse Metric TLV from its
>  neighbor that does not contain a TE Default Metric sub-TLV,   then the
>  IS-IS router MUST NOT change the value of its TE Default Metric   sub-
>  TLV for that link."
> 
>  - so this is a reversal from -07, where it said it MUST add the   metric offset
>    value to the TE default metric. Note this is also not updated     in M-ISIS section.

NS> This is while responding to one of the LC comments, it seemed confusing
to do in the previous way in 07. We made the change in 08 version to have them
go independently. Yes, we missed the M-ISIS section. Good catch.

> 
> - 3.1 "Routers MUST scan the Metric Offset value and TE sub-TLVs  in all
>  subsequently received Reverse Metric TLVs.  If changes are   observed
>  by a receiver of the Reverse Metric TLV in the Metric Offset   value or
>  TE Default Metric sub-TLV value, the receiving router MUST   update its
>  advertised IS-IS default metric or Traffic Engineering   parameters in
>  the appropriate TLVs, recompute its SPF tree and flood new LSPs   to
>  other IS-IS routers.
> 
>  - I don't like this, why do we have to say, "pay attention to   and act on
>    updates to the value?" When do we *not* do this in routing     protocols?

NS> You are right! Completely agree and will remove this paragraph.

> 
>  - If we keep this text, change to "subsequently received IIH"   as one might
>    read this meaning that we accept multiple TLVs per IIH which     we don't.
> 
> - 3.2 "The Reverse Metric TLV is applicable to Multi-Topology IS-IS (M-ISIS)
>  [RFC5120] capable point-to-point links.  If an IS-IS router is
>  configured for M-ISIS it MUST send only a single Reverse Metric   TLV
>  in IIH PDUs toward its neighbor(s) on the designated link that   is
>  about to undergo maintenance."
> 
>  - There are other reasons to set the reverse metric (e.g., high   BER on
>    receive).

NS> Ok, will change to more general terms.

> 
> - 3.2 "If an M-ISIS router is configured to advertise TE Default Metric
>  sub-TLVs for one or more topologies, but does not receive a TE   Default Metric
>  sub-TLV in a Reverse Metric TLV, then the M-ISIS router MUST   add the value in
>  Metric Offset field of the Reverse Metric TLV to each of the TE   Default
>  Metric sub-TLVs for all topologies. The M-ISIS should flood its   newly updated
>  MT IS TLVs and recompute its SPF/CSPF accordingly."
> 
>  - This is opposite the changed behavior described in 3.1.

NS> We missed that. Will sync up with the 3.1 and use the new mechanism
across.

> 
> 
> - 3.4 P2P change says "Must Add" and removed the text about not going to
>  overload-max value. (2^24-1), should probably say "must add   according to the
>  rules found in 3.1?

NS> makes sense, will do.

thanks
- Naiming

> 
> 
> Thanks,
> Chris.
> 
> Naiming Shen (naiming) <naiming@cisco.com> writes:
> 
>> Hi Chris,
>> 
>>> On Jan 11, 2018, at 1:19 AM, Christian Hopps <chopps@chopps.org> wrote:
>>> 
>>> 
>>> Naiming Shen (naiming) <naiming@cisco.com> writes:
>>> 
>>>> Hi,
>>>> 
>>>> Sounds reasonable. At this stage of the draft, we’ll probably skip this
>>>> capability. If it is found needed later, it can be added easily. I suspect
>>>> there are a number of other things can be later ride on top of this.
>>> 
>>> Hi Naiming,
>>> 
>>> Correct me if I'm wrong, but aren't you saying here that you would not
>>> add the 2^24-1 functionality? I'm asking b/c you also just published a
>>> new version -08 that appears to add this functionality. :)
>>> 
>>> Was there any off-list discussion that led to the change of heart?
>> 
>> Actually, this is not really a new functionality of the draft:-)
>> We also removed the section 3.6 “Link Overload Attribute Bit” of
>> sub-TLV of TLV 22 in the LSP. This change is due to several factors:
>> 
>> - the long discusion ongoing of OSPF mailing list of the name “overload”,
>> which has disagreement on what does this “overload” really meant,
>> and what to do if it’s “overloaded”. This version 7 borrowed this from
>> OSPF, and now we got requests also to reconsider the name of this
>> “Link Overload Attribute Bit”
>> 
>> - More importantly we just realized that, to use this “overload” bit in LSP,
>> the backwards compatibility is not possible anymore, as in the other
>> “reverse-metric” feature which is all local to the link. So, if we have to
>> use this “overload” bit in LSP, we have also to define the router
>> “capabilities” to advertise this, and synchronize among area/domain,
>> which we really don’t want to do in ‘reverse-metric'
>> 
>> - Third with this “U” bit, it achieves the same effect of the “overload” bit,
>> since the neighbor can optionally set the (2^24-1) and take out  the
>> link as ‘unusable’ for IGP or TE, while at the mean time keep  the same
>> backwards compatibility in the area/domain, which is a very  clean solution.
>> 
>> - I have had long email/chat discussion on this with Les, since we have
>> seen the email, this (2^24-1) has been part of the comments discussion
>> during the last call. and at the time I didn’t think clearly and mentioned on
>> the list we wouldn't do that, but with all the above mentioned reasons,
>> we decided that is the right way to go. As mentioned, the reason of doing
>> that is not to handle the multi-area LDP/IGP sync kind of use-case, but
>> to support TE topology to take the link out just as in the removed
>> section 3.6 in ver 7.
>> 
>> thanks.
>> - Naiming
>> 
>>> 
>>> Thanks,
>>> Chris.
>>> 
>>>> Regards,
>>>> - Naiming
>>>> 
>>>> On Dec 30, 2017, at 4:05 PM, Les Ginsberg (ginsberg) <ginsberg@cisco.com<mailto:ginsberg@cisco.com>> wrote:
>>>> 
>>>> 
>>>> 
>>>> From: Alexander Okonnikov [mailto:alexander.okonnikov@gmail.com]
>>>> Sent: Saturday, December 30, 2017 3:34 PM
>>>> To: Les Ginsberg (ginsberg) <ginsberg@cisco.com<mailto:ginsberg@cisco.com>>
>>>> Cc: Naiming Shen (naiming) <naiming@cisco.com<mailto:naiming@cisco.com>>; isis-wg@ietf.org<mailto:isis-wg@ietf.org>; Christian Hopps <chopps@chopps.org<mailto:chopps@chopps.org>>; isis-ads@ietf.org<mailto:isis-ads@ietf.org>
>>>> Subject: Re: [Isis-wg] WG Last Call for draft-ietf-isis-reverse-metric-07
>>>> 
>>>> Les,
>>>> 
>>>> 
>>>> 31 дек. 2017 г., в 2:25, Les Ginsberg (ginsberg) <ginsberg@cisco.com<mailto:ginsberg@cisco.com>> написал(а):
>>>> 
>>>> Alex -
>>>> 
>>>> From: Alexander Okonnikov [mailto:alexander.okonnikov@gmail.com]
>>>> Sent: Saturday, December 30, 2017 3:06 PM
>>>> To: Les Ginsberg (ginsberg) <ginsberg@cisco.com<mailto:ginsberg@cisco.com>>
>>>> Cc: Naiming Shen (naiming) <naiming@cisco.com<mailto:naiming@cisco.com>>; isis-wg@ietf.org<mailto:isis-wg@ietf.org>; Christian Hopps <chopps@chopps.org<mailto:chopps@chopps.org>>; isis-ads@ietf.org<mailto:isis-ads@ietf.org>
>>>> Subject: Re: [Isis-wg] WG Last Call for draft-ietf-isis-reverse-metric-07
>>>> 
>>>> Les,
>>>> 
>>>> 
>>>> 
>>>> 31 дек. 2017 г., в 1:48, Les Ginsberg (ginsberg) <ginsberg@cisco.com<mailto:ginsberg@cisco.com>> написал(а):
>>>> 
>>>> Alex -
>>>> 
>>>> From: Alexander Okonnikov [mailto:alexander.okonnikov@gmail.com]
>>>> Sent: Saturday, December 30, 2017 2:38 PM
>>>> To: Les Ginsberg (ginsberg) <ginsberg@cisco.com<mailto:ginsberg@cisco.com>>
>>>> Cc: Naiming Shen (naiming) <naiming@cisco.com<mailto:naiming@cisco.com>>; isis-wg@ietf.org<mailto:isis-wg@ietf.org>; Christian Hopps <chopps@chopps.org<mailto:chopps@chopps.org>>; isis-ads@ietf.org<mailto:isis-ads@ietf.org>
>>>> Subject: Re: [Isis-wg] WG Last Call for draft-ietf-isis-reverse-metric-07
>>>> 
>>>> Hi Les,
>>>> 
>>>> Don't advertise link and advertise it with metric 2^24-1 makes sense again. In the former case that link cannot be used for TE LSPs, while in latter one it is possible. This is also described in RFC 5305:
>>>> 
>>>> "   If a link is advertised with the maximum link metric (2^24 - 1), this
>>>> link MUST NOT be considered during the normal SPF computation. This
>>>> will allow advertisement of a link for purposes other than building
>>>> the normal Shortest Path Tree.  An example is a link that is
>>>> available for traffic engineering, but not for hop-by-hop routing."
>>>> 
>>>> [Les:] I am well aware of this. My comment regarding (2^24 - 1) is in the context of reverse metric. If the reason that you want to advertise (2^24-1) is because the link is only supposed to be used for TE purposes then this would already have been done by the neighbor as part of their configuration – and it has nothing to do with adjacency bringup.
>>>> Idea was to temporarily disable IP forwarding on the link while preserve ability to use link for other transport. An example when we need it - IGP-LDP sync. If you configure 2^24-1 on the neighbor, then link will be excluded from IP topology permanently. Also, it is not clear for me how it could be done on LAN.
>>>> 
>>>> 
>>>> [Les:] My point is – if you do not want the link to be used at all – even if only while waiting for LDP sync to complete – then you simply don’t advertise the adjacency. In the case of the LAN you don’t advertise the adjacency to the DIS – so there is no 2-way connectivity on that circuit and no traffic flows to/from the node via the interface in  question. It does not matter what the neighbor/DIS is advertising.
>>>> My point - to have ability to exclude link from IP topology, but still use it in other topologies. This could be done by advertising metric 2^24-1. If adjacency is not advertised, then that link is excluded from all topologies, not only from IP. In general my proposal is to make reverse-metric functionality as flexible as possible and to don't restrict it deliberately.
>>>> 
>>>> [Les:] This is exactly what I object to. Reverse-metric is not and should not be a general purpose mechanism to have one node override the configuration of its neighbors for any and all possible reasons. It has well defined use cases which the draft describes  and its use should be limited to those cases.
>>>> 
>>>> The additional use cases you have suggested can already be handled by existing mechanisms which are local to each node and that should always be the preferred means. The potential for chaos that results when each node utilizes this mechanism to adjust the SPF outcome on other routers based on its local view of the current state of convergence is not something I want to embrace.
>>>> 
>>>> Les
>>>> 
>>>> 
>>>> 
>>>> Regarding L1 circuit between L1/L2 routers - it is not always possible or is not desired.
>>>> 
>>>> [Les:] I was covering the example you provided. It was clear from your example that although L2 only was enabled between the L1/L2 routers, you were allowing intra-area traffic to flow over that link.
>>>> If you do not want intra-area traffic to flow over that link at all, then you need to insure that L1 destinations are not leaked into L2 – in which case the proposed change you are suggesting for reverse-metric would not help.
>>>> 
>>>> If you think you have a different example that justifies your proposal I would be happy to review it – but the one you have come up with isn’t compelling.
>>>> Two L1/L2 routers could be geographically dispersed.
>>>> [Les:] Only if the L1/L2 routers are in different areas – in which case your example does not apply.
>>>> Not necessary. There could be area represented by sub-ring physical topology.
>>>> 
>>>> 
>>>> There could be L2 subdomain which provides L2 path between them. But sometimes it is not optimal to configure L1/L2 on all transit L2 routers between two ones. Also, for redundancy you will need to provide alternative L1 path in the core (to avoid routing traffic via access).
>>>> 
>>>> Another case, when having looped L1 is not desired - when R3 has reachability to the network via two ABRs (R1 and R2), and R2 is closer to R3 than R1 to R3. In case link (path) from R3 to R2 is broken, it is more optimal from data path perspective to reroute traffic to R1 rather than to R2 via R1. It is not case for regular IP routing, but becomes sensitive when we have deal with L2VPN services, such that MS-PW or H-VPLS, where R1 and R2 are S-PEs or Hub PEs, respectively.
>>>> 
>>>> [Les:] We are not discussing all possible network topologies. The topic here is the Reverse-Metric draft and whether there is a use case for a node to tell its neighbor to advertise max-metric (2^24-1).
>>>> Please stay on topic. If you have an example that justifies your proposal I would like to hear it – but please stay focused on this use case.
>>>> 
>>>> Les
>>>> 
>>>> 
>>>> 
>>>> Les
>>>> 
>>>> Thank you.
>>>> 
>>>> 
>>>> 
>>>> 
>>>> 31 дек. 2017 г., в 1:33, Les Ginsberg (ginsberg) <ginsberg@cisco.com<mailto:ginsberg@cisco.com>> написал(а):
>>>> 
>>>> I strongly disagree with this proposed change.
>>>> 
>>>> If you want to take the link totally out of the topology then simply don’t advertise the adjacency. This works for both P2P and LAN cases.
>>>> This is why the draft states
>>>> 
>>>> “a receiver of a
>>>> Reverse Metric TLV MUST use the numerically smallest value of either
>>>> the sum of its existing default metric and the Metric Offset value in
>>>> the Reverse Metric TLV or (2^24 - 2)”
>>>> 
>>>> There is no use case for (2^24 - 1).
>>>> 
>>>> As for the L1/L2 example topology that Alex used to justify his proposal, there is a much better way to prevent the premature use of the L1 link. That is to enable L1 on the link between the two L1L2 routers but configure a larger metric (e.g. 100000) so that the L1/L2 link will only be used for L1 traffic when there is no viable L1 only link. There is no need to use Reverse-Metric to do so and I believe this is an inappropriate use of this extension.
>>>> 
>>>> Les
>>>> 
>>>> 
>>>> From: Isis-wg [mailto:isis-wg-bounces@ietf.org] On Behalf Of Naiming Shen (naiming)
>>>> Sent: Saturday, December 30, 2017 11:59 AM
>>>> To: Alexander Okonnikov <alexander.okonnikov@gmail.com<mailto:alexander.okonnikov@gmail.com>>
>>>> Cc: isis-wg@ietf.org<mailto:isis-wg@ietf.org>; Christian Hopps <chopps@chopps.org<mailto:chopps@chopps.org>>; isis-ads@ietf.org<mailto:isis-ads@ietf.org>
>>>> Subject: Re: [Isis-wg] WG Last Call for draft-ietf-isis-reverse-metric-07
>>>> 
>>>> 
>>>> Hi Alex,
>>>> 
>>>> Ok. We’ll add a bit to the flag (the 2nd bit) of the ‘reverse-metric TLV’, to indicate
>>>> the originator requesting the inbound direction of the link not to be used and the
>>>> metric should be raised by the peer to (2^24 - 1) regardless the value of the ‘offset metric’
>>>> value in the TLV.
>>>> 
>>>> thanks.
>>>> - Naiming
>>>> 
>>>> On Dec 29, 2017, at 11:46 AM, Alexander Okonnikov <alexander.okonnikov@gmail.com<mailto:alexander.okonnikov@gmail.com>> wrote:
>>>> 
>>>> Hi Naiming,
>>>> 
>>>> 
>>>> 
>>>> 
>>>> 
>>>> 29 дек. 2017 г., в 6:10, Naiming Shen (naiming) <naiming@cisco.com<mailto:naiming@cisco.com>> написал(а):
>>>> 
>>>> 
>>>> Hi Alexander,
>>>> 
>>>> Thanks for the comments, see more replies inline.
>>>> 
>>>> 
>>>> 
>>>> 
>>>> 
>>>> On Dec 14, 2017, at 9:24 AM, Alexander Okonnikov <alexander.okonnikov@gmail.com<mailto:alexander.okonnikov@gmail.com>> wrote:
>>>> 
>>>> Hi authors,
>>>> 
>>>> 
>>>> I have some comments below regarding the draft:
>>>> 
>>>> 
>>>> 1) Section 2: "There is currently only two Flag bits defined." Per -07 only one flag is defined. S flag was deprecated since version -06 (implicit signaling of presence of Sub-TLVs is used via "Sub-TLV Len" field non-zero value. Text in the beginning of the chapter 2 about flag S is to be removed as well.
>>>> 
>>>> NS> will fix.
>>>> 
>>>> 
>>>> 
>>>> 
>>>> 
>>>> 
>>>> 2) Section 3.1: "In order to ensure that an individual TE link is used as a link of last resort during SPF computation, ..." I guess that you meant regular link rather than TE link.
>>>> 
>>>> 3) For the same section: Per my understanding, this section assumes that overloaded link will always be considered as last-resort link. I.e. it cannot be excluded from topology (as link with metric 2^24-1), unless originator of the TLV sets appropriate bit in corresponding Link Attributes Sub-TLV (RFC 5029) AND receiving ISs support that Sub-TLV. As alternative it could be done by allowing for originator to specify reverse metric special value 2^24-1 which would indicate to receivers that the link is to be excluded from topology completely rather than used as last resort. If reverse metric value is between 0 - 2^24-2 then link could be used in path calculation. The same rules for TE metric.
>>>> 
>>>> 
>>>> NS> I don’t see there is much difference between not used or last resort in the use cases we mentioned.
>>>> also, this metric value is an ‘offset metric’ being added on top of the existing local metric. It would not
>>>> be always feasible to make the reverse-metric off by one to mean two completely different operations.
>>>> 
>>>> One use case when unusable link vs last resort one makes sense is for IGP-LDP sync. Let's assume we have two-level IS-IS domain. There are three ISs in the domain: R1 and R2 are L1/L2 ISs, and R3 is L1-only. R1 and R2 are connected to each other via L2 circuit, and R3 is connected to R1 and R2 via L1 circuits. The link between R2 and R3 was broken and now is being restored. While adjacency has not been established on failed link, R3 has inter-area route towards R2's loopback. Once adjacency has been established, but LDP session has not yet, R3 and R2 maximize metric (2^24-2) on corresponding link. But now R2 and R3 have routes to each other as L1 intra-area, though with max metric. Because L1 intra-area route wins, R2 and R3 replace inter-area routes to each other by intra-area ones. As a result, LDP LSPs are blackholed. On the other hand, if two routers mark corresponding link as unusable (with metric 2^24-1), they would use inter-area routes until IGP-LDP sync will be com
>>> pleted.
>>>> 
>>>> An IS can make decision on whether to mark link as unusable or as last resort, using the same principle as proposed in RFC 6138.
>>>> 
>>>> 
>>>> 
>>>> 
>>>> 
>>>> 
>>>> 
>>>> 
>>>> 
>>>> 
>>>> 4) For the same section: The draft says that if originator uses narrow metric-type, it should use value 63 as max-metric. But on receiving reverse metric with such value receivers have no idea whether this is "narrow" max-metric or offset 63 for "wide" metric. I.e. the draft assumes that all ISs use the same type of metric, and using of two metric types at the same time is not covered. May be it would be appropriate to define two Reverse Metric TLVs, like IS Neighbors TLV and Extended IS Reachability TLV. Or to specify new flag to mark type of the reverse metric.
>>>> 
>>>> 
>>>> NS> to be simple, we have to assume a network is either run wide or narrow. It can not be fixed. The
>>>> document is trying to be complete to mention the ‘narrow’ case.
>>>> 
>>>> 
>>>> 
>>>> 
>>>> 
>>>> 
>>>> 5) For the same section: It is not clear for me why DIS should use min(63, (Metric + Reverse Metric)) while composing pseudonode LSP. If DIS is configured for using "wide" metric-type, it will use Extended IS Reachability TLVs for describing its neighbors. Moreover, in this case DIS is not obligated to still insert IS Neighbors TLVs in its Pseudonode LSP (in addition to Extended IS Reachability TLVs) when it is configured for "wide-only" mode.
>>>> 
>>>> NS> agreed. will remove this, to keep the same goal as above, to be simple. Not to mix them.
>>>> 
>>>> 
>>>> 
>>>> 
>>>> 
>>>> 
>>>> 6) For the same section: It is not clear for me why in case when TE metric offset is not advertised in Reverse Metric TLV, receiving IS must modify its TE metric by adding IGP reverse metric value. In my mind, it would be straightforward to use follow rule: if originator doesn't include TE metric part then it doesn't wish to overload TE link, but only IGP link. For example, originator advertises Reverse metric TLV as part of IGP-LDP synchronization procedure (section 3.5). It is not reason to impact TE properties (metric in this case) of the link. Hence, originator could advertise Reverse metric TLV without TE metric Sub-TLV, in order to signal that "TE metric is left intact”.
>>>> 
>>>> NS> sounds resonable. Will change this to say if the sub-TLV of TE is not received, the TE properties will not change
>>>> by receiving this ‘reverse-metric’ TLV.
>>>> 
>>>> 
>>>> 
>>>> 
>>>> 
>>>> 
>>>> 7) Section 3.3: The draft is not clear about handling of TE metric by DIS. Usually DIS implementations don't insert TE Sub-TLVs into Extended IS Reachability TLVs in Pseudonode LSP. May be it would be better to add explicit text that: if DIS receives TE metric Sub-TLV in Reverse Metric TLV it should update TE Default Metric Sub-TLV value of corresponding Extended IS Reachability TLV OR insert new one if it was not present there.
>>>> 
>>>> NS> To me, there is not much difference between DIS and other nodes. Will try to add some words to that.
>>>> 
>>>> thanks.
>>>> - Naiming
>>>> 
>>>> 
>>>> 
>>>> 
>>>> 
>>>> 
>>>> 
>>>> Thanks!
>>>> 
>>>> 
>>>> 30.11.2017 01:47, Naiming Shen (naiming) пишет:
>>>> 
>>>> 
>>>> 
>>>> 
>>>> Hi Ketan,
>>>> 
>>>> thanks for the support and comments. some clarification inline,
>>>> 
>>>> 
>>>> 
>>>> 
>>>> 
>>>> On Nov 28, 2017, at 11:54 PM, Ketan Talaulikar (ketant) <ketant@cisco.com<mailto:ketant@cisco.com>> wrote:
>>>> 
>>>> Hello,
>>>> 
>>>> I support this draft, however would like the following aspect/scenario clarified.
>>>> 
>>>> Consider the scenario where both the neighbours on a p2p link initiate the reverse metric procedure (i.e. include the TLV in their hellos concurrently). How are implementations supposed to handle this? Normally the choice of metric conveyed via this TLV is based on a particular condition (which need not just be "overload") on the local router which requires the neighbour to use shift to using the reverse metric supplied. So when both neighbours initiate this process, it would be good to have the specification provide a deterministic behaviour since the reverse metric values provided may conflict in certain "non-overload" conditions. If both routers simply accept the value supplied by their neighbour, it may not achieve the original purpose/design of this triggering this mechanism?
>>>> When you say if both sides initiated this ‘reverse metric’, you implied
>>>> there is a timing issue with this procedure in the draft.
>>>> 
>>>> The value of this ‘metric offset’ (or whatever will be called) of this TLV,
>>>> is just a number. The draft does not say this number is equal to the
>>>> configured ‘metric’ value plus the received ‘reverse metrc’ value, that
>>>> would be non-deterministic and both sides would keep going up until it’s
>>>> overloaded:-)
>>>> 
>>>> Each side of IS-IS link decides if it needs to send a ‘reverse metric’ over the link,
>>>> either in link-overloading case, or other cases. It’s a static number, it does not
>>>> depend on the other side sending a ‘reverse metric’ or not. This both sides
>>>> sending a ‘reverse-metric’ over a link is equivalent to an operator provisions
>>>> new metric (say both plus 10 to the old metric) on both sides of the link at
>>>> the same time, there is no non-determinitic thing in this.
>>>> 
>>>> thanks.
>>>> - Naiming
>>>> 
>>>> 
>>>> 
>>>> 
>>>> 
>>>> Following options come to my mind:
>>>> a) when this condition is detected, none of the routers actually apply the reverse metric procedure
>>>> b) when this condition is detected, the router with higher/lower system-id value (or some such tiebreaker) wins and the other withdraws its reverse metric (until then (a) applies)
>>>> c) some mechanism/rule that is based on the value of metric offset specified perhaps (made harder since the actual metric is not signalled but the offset) which determines the "winner" so the other withdraws their TLV.
>>>> 
>>>> Since the mechanism is not specific to overload conditions (where this is not an issue), it may be necessary for the specification to clarify this behaviour to ensure interoperability.
>>>> 
>>>> Thanks,
>>>> Ketan
>>>> 
>>>> -----Original Message-----
>>>> From: Isis-wg [mailto:isis-wg-bounces@ietf.org] On Behalf Of Christian Hopps
>>>> Sent: 16 November 2017 04:13
>>>> To: isis-wg@ietf.org<mailto:isis-wg@ietf.org>
>>>> Cc: isis-ads@ietf.org<mailto:isis-ads@ietf.org>
>>>> Subject: [Isis-wg] WG Last Call for draft-ietf-isis-reverse-metric-07
>>>> 
>>>> 
>>>> The authors have asked for and we are starting a WG Last Call on
>>>> 
>>>> https://datatracker.ietf.org/doc/draft-ietf-isis-reverse-metric/
>>>> 
>>>> which will last an extended 3 weeks to allow for IETF100.
>>>> 
>>>> Thanks,
>>>> Chris.
>>>> 
>>>> _______________________________________________
>>>> Isis-wg mailing list
>>>> Isis-wg@ietf.org<mailto:Isis-wg@ietf.org>
>>>> https://www.ietf.org/mailman/listinfo/isis-wg
>>>> 
>>>> _______________________________________________
>>>> Isis-wg mailing list
>>>> Isis-wg@ietf.org<mailto:Isis-wg@ietf.org>
>>>> https://www.ietf.org/mailman/listinfo/isis-wg
>>>> _______________________________________________
>>>> Isis-wg mailing list
>>>> Isis-wg@ietf.org<mailto:Isis-wg@ietf.org>
>>>> https://www.ietf.org/mailman/listinfo/isis-wg
>>>> 
>>>> 
>>>> _______________________________________________
>>>> Isis-wg mailing list
>>>> Isis-wg@ietf.org
>>>> https://www.ietf.org/mailman/listinfo/isis-wg
>