Re: [ipwave] IPWAVE Side Meeting

Chris Shen <shenyiwen7@gmail.com> Wed, 04 December 2019 05:24 UTC

Return-Path: <shenyiwen7@gmail.com>
X-Original-To: its@ietfa.amsl.com
Delivered-To: its@ietfa.amsl.com
Received: from localhost (localhost [127.0.0.1]) by ietfa.amsl.com (Postfix) with ESMTP id 6726E1200CE for <its@ietfa.amsl.com>; Tue, 3 Dec 2019 21:24:22 -0800 (PST)
X-Virus-Scanned: amavisd-new at amsl.com
X-Spam-Flag: NO
X-Spam-Score: -1.747
X-Spam-Level:
X-Spam-Status: No, score=-1.747 tagged_above=-999 required=5 tests=[BAYES_00=-1.9, DKIM_SIGNED=0.1, DKIM_VALID=-0.1, DKIM_VALID_AU=-0.1, FREEMAIL_ENVFROM_END_DIGIT=0.25, FREEMAIL_FROM=0.001, HTML_MESSAGE=0.001, RCVD_IN_DNSWL_NONE=-0.0001, SPF_HELO_NONE=0.001, SPF_PASS=-0.001, URIBL_BLOCKED=0.001] autolearn=no autolearn_force=no
Authentication-Results: ietfa.amsl.com (amavisd-new); dkim=pass (2048-bit key) header.d=gmail.com
Received: from mail.ietf.org ([4.31.198.44]) by localhost (ietfa.amsl.com [127.0.0.1]) (amavisd-new, port 10024) with ESMTP id W6-SKuVkoXG1 for <its@ietfa.amsl.com>; Tue, 3 Dec 2019 21:24:20 -0800 (PST)
Received: from mail-pf1-x433.google.com (mail-pf1-x433.google.com [IPv6:2607:f8b0:4864:20::433]) (using TLSv1.2 with cipher ECDHE-RSA-AES128-GCM-SHA256 (128/128 bits)) (No client certificate requested) by ietfa.amsl.com (Postfix) with ESMTPS id 9E60A120086 for <its@ietf.org>; Tue, 3 Dec 2019 21:24:19 -0800 (PST)
Received: by mail-pf1-x433.google.com with SMTP id x185so3027203pfc.5 for <its@ietf.org>; Tue, 03 Dec 2019 21:24:19 -0800 (PST)
DKIM-Signature: v=1; a=rsa-sha256; c=relaxed/relaxed; d=gmail.com; s=20161025; h=mime-version:references:in-reply-to:from:date:message-id:subject:to :cc; bh=iStB9XTqJ9f6bj7+REhkslSbgbmOCpgqIrkAe/h4exI=; b=TVXLdlrUlle1b5IM+Uve73NeLB8+qGHf2jmw+Vfs10JfXDu+4XD2CLT3G+ZcDVpmy3 AKUuyYjuhrZooZ2KsN028MeT57Zi1YwESJT+2CW080qN61AgYVjj4OKIJLbtnQrN0Z2s ChFFU69hKpXZ8leNzQWAaEAKDubdwVTcg68JPurE9VitaajfUIyD7F7sE2pLkH9diWOh GYfxvIoyUCStQbWqrIX86rTvHoe0L3AsnesjnTBiInEFTFPHnMB/amtwG0iLNxTEYLxf 12CEcr2KpBVhTf7cNxmWsG7NIyFWXc2jGnkPL2UJS9zlerr00GrEXbdlUHFGPwpkhLgd zj7g==
X-Google-DKIM-Signature: v=1; a=rsa-sha256; c=relaxed/relaxed; d=1e100.net; s=20161025; h=x-gm-message-state:mime-version:references:in-reply-to:from:date :message-id:subject:to:cc; bh=iStB9XTqJ9f6bj7+REhkslSbgbmOCpgqIrkAe/h4exI=; b=GQRwN1jd3fx75nkDF0gjGXzLPy/7KOXtHWg4bKcarRY0QPdpUHstB7wKsO3UYgssXj 0HZJlDkByHVAOhs9k7qBi/c/op4uWTfnlSjzIJb1xp9vz2pvNm3g/YclfP70AXV6kJ5t lZ5MrMCz7h+x1edu8V5kleTn8v0BySZS2aCgkKoNstciU9cjvKVQnjPLfS5cP+pnqHs5 62sa/TJ1d1QbnBl/xV6HAyFhaICYoMj20enGfOclx6xcjBNZYawLbHlS6S48HuqVdeDH 8UnJcoXhOzc1vzYGuKTpwM5O3F97wRdqNLQ3jXqnRkMjmHUuYAqG2VC0r8eFBMzwdl6f inew==
X-Gm-Message-State: APjAAAV6fCxcL43CnhaU8dnepp70PRW6aG9wq/m+GcTLfmRN2LgJ5fWG m24lxOx+ESkZykYb01m0rPjvKfF3CfVDxSXBaw==
X-Google-Smtp-Source: APXvYqxyH06BtAnJ85AyaCZxZzaH7/ztK77wCRy69E7lWBC1ls8H8k2nDhEZzItno63d6+v16B8gCbRcYW4eP/cRfk0=
X-Received: by 2002:aa7:8216:: with SMTP id k22mr1679967pfi.149.1575437057674; Tue, 03 Dec 2019 21:24:17 -0800 (PST)
MIME-Version: 1.0
References: <CAPK2DeyAWKbA0jZmpSdvJVwG3RsqVd5c15r-wxTjEsH3uGbk0w@mail.gmail.com> <CAL1T1NEBoJUQWO1nWwoMwVEN6A+hsh4Qu09cGq0yeG-jkuWgeg@mail.gmail.com> <b14853b1-969a-9899-1201-2cb756fa6a07@gmail.com> <CAL1T1NEL+Z2em2+vFCQLXJJWKFg+snrX4MnPgn=WbjF6TEYegg@mail.gmail.com>
In-Reply-To: <CAL1T1NEL+Z2em2+vFCQLXJJWKFg+snrX4MnPgn=WbjF6TEYegg@mail.gmail.com>
From: Chris Shen <shenyiwen7@gmail.com>
Date: Wed, 04 Dec 2019 14:23:49 +0900
Message-ID: <CAL1T1NEBrpkQfgoBN1mg0sJgQnpuMTzz+pZzhos=aM9vZOA6YA@mail.gmail.com>
To: Alexandre Petrescu <alexandre.petrescu@gmail.com>
Cc: its <its@ietf.org>, "Mr. Jaehoon Paul Jeong" <jaehoon.paul@gmail.com>, skku-iotlab-members <skku-iotlab-members@googlegroups.com>
Content-Type: multipart/mixed; boundary="00000000000031c34b0598da06b4"
Archived-At: <https://mailarchive.ietf.org/arch/msg/its/2rIs219izaHEXQh8zr1_NMmHojs>
Subject: Re: [ipwave] IPWAVE Side Meeting
X-BeenThere: its@ietf.org
X-Mailman-Version: 2.1.29
Precedence: list
List-Id: IPWAVE - IP Wireless Access in Vehicular Environments WG at IETF <its.ietf.org>
List-Unsubscribe: <https://www.ietf.org/mailman/options/its>, <mailto:its-request@ietf.org?subject=unsubscribe>
List-Archive: <https://mailarchive.ietf.org/arch/browse/its/>
List-Post: <mailto:its@ietf.org>
List-Help: <mailto:its-request@ietf.org?subject=help>
List-Subscribe: <https://www.ietf.org/mailman/listinfo/its>, <mailto:its-request@ietf.org?subject=subscribe>
X-List-Received-Date: Wed, 04 Dec 2019 05:24:23 -0000

Hi Alex,

Here I share wireshark packet dump file from the experiment of the
hackathon.
These packet information were collected during webcam streaming between two
DSRC-enabled laptops.

If you have any questions, please let me know.

BTW, when you setup your experiment platform, how did the IPv6 neighbor
discovery work?
Was it automatically running, or you need to manually configure it?


Thanks!
Chris.


On Wed, Nov 27, 2019 at 6:41 PM Chris Shen <shenyiwen7@gmail.com> wrote:

> Hi Alex,
>
> I answer your questions as follows:
>
> - is the manual available? ("Made a new manual for running OCB mode")
>>
> Yes, it is in the following github link:
>
> https://github.com/ipwave-hackathon-ietf/ipwave-hackathon-ietf-106/blob/master/IPWAVE-Manual-Hackathon-IETF106-v0.2.pdf
>
>
>
>> - have you made a patch file?
>>
> I didn't make patch file for this implementation.
> Based on existing resources, there are some patch work to enable
> OCB mode in the Linux kernel.
> One of them is much concrete, which was made by Czech Technical University
> in Prague and Volkswagen.
> The resource link is as follows:
> https://ctu-iig.github.io/802.11p-linux/
> But when I follow their instructions to configure OCB mode, there
> are some unclear steps and some compiling errors coming out,
> so I have modified the Makefile and explored other ways to configure
> OCB mode, which is shown in the manual.
>
>
>
>> - did you use a notion of QoS?  For example, can you send us a wireshark
>
>    packet dump made in monitor mode, of the IPv6 packets used for video
>>    streaming between the two laptops?  These packets have 802.11 QoS Data
>>    headers or just 802.11 Data headers?
>>
> I didn't use QoS. For the current webcam streaming, I use gst-launch
> from Gstreamer. This gst-launch uses UDP and RTP to stream webcam.
>
> I checked packet dump, there is no QoS information, so I believe the
> packets
> just use 802.11 Data headers.
> I will send you the packet dump later, since I didn't save them.
>
>
>
>> - the wifi card wilocity is on USB or is it internal to the laptop?
>
> For the current test, we replaced the original wifi card inside a laptop
> with an Athero wifi card using ath9k driver. This wifi card uses PCIe-mini
> interface to connect with the laptop.
> We also use the laptop internal antennas for 5.9GHz band. Initially,
> we are not sure if the antennas of the testing laptop can support 5.9GHz
> band, so we connect the wifi card with external antennas that support
> 5.9GHz.
> After testing, we found that the laptop internal antennas can also support
> 5.9GHz band, so we just use them.
> If you have a USB dongle that has PCIe-mini interface, I believe an
> Atheros wifi
> card can work as well, but you need to have external antennas to connect
> with
> the wifi card on the USB dongle.
>
> Thanks!
> Chris.
>
>
> On Tue, Nov 26, 2019 at 9:56 PM Alexandre Petrescu <
> alexandre.petrescu@gmail.com> wrote:
>
>> Hi Chris,
>>
>> With respect to the Hackathon slides, my colleague and I would like to
>> ask you:
>>
>> - is the manual available? ("Made a new manual for running OCB mode")
>> - have you made a patch file?
>> - did you use a notion of QoS?  For example, can you send us a wireshark
>>    packet dump made in monitor mode, of the IPv6 packets used for video
>>    streaming between the two laptops?  These packets have 802.11 QoS Data
>>    headers or just 802.11 Data headers?
>> - the wifi card wilocity is on USB or is it internal to the laptop?
>>
>> Yours,
>>
>> Alex
>>
>> Le 21/11/2019 à 08:13, Chris Shen a écrit :
>> > Hi its,
>> >
>> > Here I share side meeting slides for IPWAVE WG.
>> >
>> > Please join us to give your opinions and suggestions about the work in
>> > IPWAVE WG.
>> >
>> > We really need your input! ^_^
>> >
>> > Thanks!
>> > Chris.
>> >
>> >
>> >
>> > On Thu, Nov 21, 2019 at 11:12 AM Mr. Jaehoon Paul Jeong
>> > <jaehoon.paul@gmail.com <mailto:jaehoon.paul@gmail.com>> wrote:
>> >
>> >     Hi IPWAVE WG,
>> >
>> >     There will be a side meeting for I2NSF WG's next steps from 3:30PM
>> >     to 4:30PM today
>> >     at Bras Basah.
>> >     https://datatracker.ietf.
>> .org/meeting/106/floor-plan?room=bras-basah#raffles-city-convention-center
>> >     <
>> https://datatracker.ietf.org/meeting/106/floor-plan?room=bras-basah#raffles-city-convention-center
>> >
>> >
>> >
>> >     The agenda for IPWAVE side meeting is as follows:
>> >
>> >     - IPWAVE Hackathon Project (Yiwen Chris Shen, 5 min)
>> >     - IPWAVE Problem Statement Draft (Jaehoon Paul Jeong, 5 min)
>> >     - Vehicular Neighbor Discovery Draft (Yiwen Chris Shen, 5 min)
>> >     - Vehicular Mobility Management Draft (Yiwen Chris Shen, 5 min)
>> >     - Security and Privacy Draft (Jaehoon Paul Jeong, 5 min)
>> >     - Context-Aware Navigator Draft (Yiwen Chris Shen, 5 min)
>> >     - Open Discussion for IPWAVE WG Progress (30 min)
>> >
>> >     The main purpose of this side meeting is to share the progress of
>> >     IPWAVE PS draft and the IPWAVE hackathon project using the video
>> >     delivery in the Linux system for IPv6 over IEEE 802.11-OCB.
>> >
>> >     I would like to explain the status of our WG and the importance of
>> >     the IPWAVE PS draft for the next step of our WG.
>> >
>> >     Welcome your engagement and feedback.
>> >
>> >     Thanks.
>> >
>> >     Best Regards,
>> >     Paul
>> >
>> >     --
>> >     You received this message because you are subscribed to the Google
>> >     Groups "skku-iotlab-members" group.
>> >     To unsubscribe from this group and stop receiving emails from it,
>> >     send an email to skku-iotlab-members+unsubscribe@googlegroups.com
>> >     <mailto:skku-iotlab-members+unsubscribe@googlegroups.com>.
>> >     To post to this group, send email to
>> >     skku-iotlab-members@googlegroups.com
>> >     <mailto:skku-iotlab-members@googlegroups.com>.
>> >     To view this discussion on the web visit
>> >
>> https://groups.google.com/d/msgid/skku-iotlab-members/CAPK2DeyAWKbA0jZmpSdvJVwG3RsqVd5c15r-wxTjEsH3uGbk0w%40mail.gmail.com
>> >     <
>> https://groups.google.com/d/msgid/skku-iotlab-members/CAPK2DeyAWKbA0jZmpSdvJVwG3RsqVd5c15r-wxTjEsH3uGbk0w%40mail.gmail.com?utm_medium=email&utm_source=footer
>> >.
>> >     For more options, visit https://groups.google.com/d/optout.
>> >
>> >
>> >
>> > --
>> > Yiwen (Chris) Shen, Ph.D. Candidate
>> >
>> > Homepage: https://chrisshen.github.io
>> > IoT Lab: _http://iotlab.skku.edu <http://iotlab.skku.edu/>_
>> > Sungkyunkwan University, Suwon, South Korea
>> > Mobile:+82-(0)10-6871-8103
>> > Email: chrisshen@skku.edu
>> > <mailto:chrisshen@skku.edu>
>> >
>> > _______________________________________________
>> > its mailing list
>> > its@ietf.org
>> > https://www.ietf.org/mailman/listinfo/its
>> >
>>
>
>
> --
> Yiwen (Chris) Shen, Ph.D. Candidate
>
> Homepage: https://chrisshen.github.io
> IoT Lab: *http://iotlab.skku.edu <http://iotlab.skku.edu/>*
> Sungkyunkwan University, Suwon, South Korea
> Mobile:+82-(0)10-6871-8103
> Email: chrisshen@skku.edu
>


-- 
Yiwen (Chris) Shen, Ph.D. Candidate

Homepage: https://chrisshen.github.io
IoT Lab: *http://iotlab.skku.edu <http://iotlab.skku.edu/>*
Sungkyunkwan University, Suwon, South Korea
Mobile:+82-(0)10-6871-8103
Email: chrisshen@skku.edu