Re: [jose] JWS Unencoded Payload Option and the % character

[Mike Jones <[e-mail]>]

Thanks for your thoughtful comments, Vladimir.  The objective is to enable using unencoded payloads.

Thinking about it in terms of that goal, that actually eliminates choices 3, 4, and 5, because all require supporting a new payload encoding (x-www-form-urlencoded encoding), which defeats the purpose.

That leaves 1 (prohibit %) and 2 (allow % with no JWS-level processing performed).  Because 2 gives applications the flexibility to use % for application-level encoding if they choose, I'm now thinking that 2 is probably the more general choice than 1.  The only caveat is that applications would have to be aware that when passed in URLs, % would have to be represented as %25, since it is not URL-safe.

What do people think of the choice between 1 and 2?

                                                                -- Mike

From: jose [mailto:[e-mail]] On Behalf Of Vladimir Dzhuvinov
Sent: Friday, September 25, 2015 8:29 AM
To: [e-mail]<mailto:[e-mail]>
Subject: Re: [jose] JWS Unencoded Payload Option and the % character

I read the entire discussion. I'm unsure how to rate the five choices. If I knew what the underlying objective is, it would be easier to make a technical judgment.

So what are we trying to achieve here?

Allow web apps to pass around such JWS messages more easily? Then URL-safety would matter. But how likely is this use case?

Or save apps additional processing?

Or keep the JWS payload as unmodified as possible?

Could this be left to the actual app to determine, and hence the most suitable encoding?

Vladimir
On 23.09.2015 05:41, Manger, James wrote:

Comments inline



From: Mike Jones [mailto:[e-mail]]

Sent: Wednesday, 23 September 2015 11:52 AM

To: Manger, James; [e-mail]<mailto:[e-mail]>

Subject: RE: JWS Unencoded Payload Option and the % character



Writing as an individual, your possible option 5 has the following downsides, at least as I see it:



(a) It doesn't represent the payload in unencoded form, which was one of the primary motivations for this option.



The payload can be unencoded in the JSON Serialization and when detached - those are the motivations; not an unencoded form in a non-detached Compact Serialization.



(b) It's not self-consistent, since the "b64":false treatment of detached payloads requires them to be unencoded whereas the treatment of attached payloads requires the opposite.



It is consistent in always treating the 2nd part of a JWS as a base64url-encoded payload. The consistency of handling detached payloads depends on the API you offer. If your API expects "detachedSigningInput" it will depend on "b64" (ie be inconsistent). However, if your API expects "detachedRawPayload" it does not depend on "b64" (ie will be consistent). The latter makes more sense to me: RawPayload is something the call cares about; SigningInput is an internal detail.



(c) It breaks the invariant that the JWS Signing Input is simply the contents of the JWS prior to the second period - which is one of the simple things about JWSs using the compact serialization.



That is not a particularly useful invariant. It is not as though a signature verification sub-system can treat a "JWS prior to the 2nd period" as a blob. It still needs to split on the period, base64url-decode the 1st part, JSON-parse it, then look at the algorithm & key id, before doing any verification.



And I don't see any particular upside.  It's just a standard JWS with an unnecessarily different JWS Signing Input computation but the same payload representation and an extra field in the encoded header representation.  Better to just use a normal JWS, given the choice between that and 5.



Indeed, "b64":false is unnecessary if you are using non-detached Compact Serializations. The upside is for large payloads that are detached or use the JSON Serialization.



--

James Manger





From: Manger, James [mailto:[e-mail]]

Sent: Tuesday, September 22, 2015 6:05 PM

To: Mike Jones; [e-mail]<mailto:[e-mail]><mailto:[e-mail]><mailto:[e-mail]>

Subject: RE: JWS Unencoded Payload Option and the % character



Or a 5th option:



5. "b64":false affects the Signing Input, but not the Compact Serialization (which remains a URL-safe string for any Payload). The 2nd dot-separated component of the Compact Serialization is always BASE64URL(JWS Payload); a '%' in the Payload causes no issues, neither does a '.' nor any other octet.



The only corner case option 5 prevents is when you have: (1) a large payload; (2) that doesn't contain octet 0x2E '.'; (3) probably doesn't contain any of the other 190 octet values not in the URL-safe set; (4) you want to use the Compact Serialization; (5) you don't want to use a detached payload; and (6) you cannot tolerate the additional 33% space overhead from base64url-encoding the Payload. I don't think this is a corner case anyone is interested in.



--

James Manger



From: jose [mailto:[e-mail]] On Behalf Of Mike Jones

Sent: Wednesday, 23 September 2015 8:23 AM

To: [e-mail]<mailto:[e-mail]><mailto:[e-mail]><mailto:[e-mail]>

Subject: [jose] JWS Unencoded Payload Option and the % character



There's one outstanding issue with the JWS Unencoded Payload Option specification that I'd like to see working group discussion on:  What should the processing rules be for a '%' character in the JWS Payload for a non-detached payload using "b64":false with the JWS Compact Serialization?  I see the possibilities as being:



1.  Use of '%' is prohibited, because it is not URL-safe.  This is the behavior current specified in https://tools.ietf.org/html/draft-ietf-jose-jws-signing-input-options-02#section-5.2<https://na01.safelinks.protection.outlook.com/?url=https%3a%2f%2ftools.ietf.org%2fhtml%2fdraft-ietf-jose-jws-signing-input-options-02%23section-5.2&data=01%7c01%7cMichael.Jones%40microsoft.com%7c6fbe6ca0c59048e2d97808d2c3b2f875%7c72f988bf86f141af91ab2d7cd011db47%7c1&sdata=tKBYn8mzSjJkpYNPR5JhiSqDrg8n9<https://na01.safelinks.protection.outlook.com/?url=https%3a%2f%2ftools.ietf.org%2fhtml%2fdraft-ietf-jose-jws-signing-input-options-02%23section-5.2&data=01%7c01%7cMichael.Jones%40microsoft.com%7c6fbe6ca0c59048e2d97808d2c3b2f875%7c72f988bf86f141af91ab2d7cd011db47%7c1&sdata=tKBYn8mzSjJkpYNPR5JhiSqDrg8n9MVFrV28pv%2fQGW8%3d>

 M<https://na01.safelinks.protection.outlook.com/?url=https%3a%2f%2ftools.ietf.org%2fhtml%2fdraft-ietf-jose-jws-signing-input-options-02%23section-5.2&data=01%7c01%7cMichael.Jones%40microsoft.com%7c6fbe6ca0c59048e2d97808d2c3b2f875%7c72f988bf86f141af91ab2d7cd011db47%7c1&sdata=tKBYn8mzSjJkpYNPR5JhiSqDrg8n9MVFrV28pv%2fQGW8%3d>

VFrV28pv%2fQGW8%3d><https://na01.safelinks.protection.outlook.com/?url=https%3a%2f%2ftools.ietf.org%2fhtml%2fdraft-ietf-jose-jws-signing-input-options-02%23section-5.2&data=01%7c01%7cMichael.Jones%40microsoft.com%7c6fbe6ca0c59048e2d97808d2c3b2f875%7c72f988bf86f141af91ab2d7cd011db47%7c1&sdata=tKBYn8mzSjJkpYNPR5JhiSqDrg8n9MVFrV28pv%2fQGW8%3d>.  This is the simplest option.  It means that inline unencoded payloads are limited to using letters, numbers, dash, underscore, and tilde.



2.  Use of '%' is allowed and has no defined semantics at the JWS level; it's just another allowed character.  This maintains the invariant that the JWS Signing input consists of the characters before the second '.' in the JWS representation.  Note that because '%' is not URL-safe, any URLs containing JWS containing '%' characters would have to form-url-encode them - resulting in them being represented in the URL as "%25".  Applications *could* use '%' at the application level to escape octets using the '%' <hex> <hex> convention but this escaping would not be understood by JWS.  For example, the JWS Payload could be "%24%2E02", be represented in the JWS as "%24%2E02", be represented in URLs as "%2524%252E02", and the JWS Signing Input would contain "%24%2E02".  I believe that this is the position that was being advocated by Sergey Beryozkin in http://www.ietf.org/mail-<http://www.ietf.org/mail-archive/web/jose/current/msg05257.html>

 a<http://www.ietf.org/mail-archive/web/jose/current/msg05257.html>

rchive/web/jose/current/msg05257.html<http://www.ietf.org/mail-archive/web/jose/current/msg05257.html><https://na01.safelinks.protection.outlook.com/?url=http%3a%2f%2fwww.ietf.org%2fmail-archive%2fweb%2fjose%2fcurrent%2fmsg05257.html&data=01%7c01%7cMichael.Jones%40microsoft.com%7c6fbe6ca0c59048e2d97808d2c3b2f875%7c72f988bf86f141af91ab2d7cd011db47%7c1&sdata=2o5YW1FQaTiawjuFSlY%2fizoWdF7jjTCq3QOgTW%2fuQ4Y%3d><https://na01.safelinks.protection.outlook.com/?url=http%3a%2f%2fwww.ietf.org%2fmail-archive%2fweb%2fjose%2fcurrent%2fmsg05257.html&data=01%7c01%7cMichael.Jones%40microsoft.com%7c6fbe6ca0c59048e2d97808d2c3b2f875%7c72f988bf86f141af91ab2d7cd011db47%7c1&sdata=2o5YW1FQaTiawjuFSlY%2fizoWdF7jjTCq3QOgTW%2fuQ4Y%3d>.



3.  Use of '%' is allowed and is used for '%' <hex> <hex> encoding of payload octets, with the JWS Signing Input keeping the '%' <hex> <hex> characters as-is.  This maintains the invariant that the JWS Signing input consists of the characters before the second '.' in the JWS representation.  It requires form-url-decoding of any payload value containing '%' when returning the JWS Payload.    For example, the JWS Payload could be "$.02", be represented in the JWS as "%24%2E02", be represented in URLs as "%2524%252E02", and the JWS Signing Input would contain "%24%2E02".



4.  Use of '%' is allowed and is used for '%' <hex> <hex> encoding of payload octets, with the JWS Signing Input containing the encoded octets.  This loses the invariant that the JWS Signing input consists of the characters before the second '.' in the JWS representation.  It requires form-url-decoding of any payload value containing '%' both when doing signing and when returning the JWS Payload.    For example, the JWS Payload could be "$.02", be represented in the JWS as "%24%2E02", be represented in URLs as "%2524%252E02", and the JWS Signing Input would contain "$.02".  This is the most consistent with the JWS JSON Serialization processing rules in https://tools.ietf.org/html/draft-ietf-jose-jws-signing-input-options-02#section-5.3<https://na01.safelinks.protection.outlook.com/?url=https%3a%2f%2ftools.ietf.org%2fhtml%2fdraft-ietf-jose-jws-signing-input-options-02%23section-5.3&data=01%7c01%7cMichael.Jones%40microsoft.com%7c6fbe6ca0c59048e2d97808d2c3b2f875%7c72f988bf86f141af91ab2d7cd011db47%7c1&sdata=wb%2fq6RyH2Oy1Km8PCIJmcDyz5gsQqBISJMKDvIy%2bIJg%3d><https://na01.safelinks.protection.outlook.com/?url=https%3a%2f%2ftools.ie%20tf.org%2fhtml%2fdraft-ietf-jose-jws-signing-input-options-02%23section-5.3&data=01%7c01%7cMichael.Jones%40microsoft.com%7c6fbe6ca0c59048e2d97808d2c3b2f875%7c72f988bf86f141af91ab2d7cd011db47%7c1&sdata=wb%2fq6RyH2Oy1Km8PCIJmcDyz5gsQqBISJMKDvIy%2bIJg%3d>, in which the JWS Payload and JWS Signing Input values are determined after performing any escape processing.  I believe that this is the position that was being advocated by Jim Schaad in http://www.ietf.org/mail-archive/web/jose/current/msg05259.html<https://na01.safelinks.protection.outlook.com/?url=http%3a%2f%2fwww.ietf.org%2fmail-archive%2fweb%2fjose%2fcurrent%2fmsg05259.html&data=01%7c01%7cMichael.Jones%40microsoft.com%7c6fbe6ca0c59048e2d97808d2c3b2f875%7c72f988bf86f141af91ab2d7cd011db47%7c1&sdata=NR%2fLeoyOPWOoJO9%2bZsgrutgVAGBxLYZttVWQ8CPdG14%3d>.



How would working group members like to see us use (or not use) '%'?



                                                                -- Mike








_______________________________________________

jose mailing list

[e-mail]<mailto:[e-mail]>

https://www.ietf.org/mailman/listinfo/jose



--

Vladimir Dzhuvinov :: [e-mail]<mailto:[e-mail]>