Re: MIB Comments 11
"Mark S. Lewis" <mlewis@telebit.com> Mon, 31 January 1994 22:20 UTC
Received: from ietf.nri.reston.va.us by IETF.CNRI.Reston.VA.US id aa16895; 31 Jan 94 17:20 EST
Received: from CNRI.RESTON.VA.US by IETF.CNRI.Reston.VA.US id aa16891; 31 Jan 94 17:20 EST
Received: from apache.telebit.com by CNRI.Reston.VA.US id aa16723; 31 Jan 94 17:20 EST
Received: from america.Sunnyvale.Telebit.CO (america-bb.sunnyvale.telebit.com) by apache (4.1/SMI-4.1/Telebit-Apache-Brent-930718) id AA14755 to ietf-archive@cnri.reston.va.us; Mon, 31 Jan 94 14:04:51 PST
Received: from yoyo.telebit.com by america.Sunnyvale.Telebit.COM (4.0/america.telebit.com-DBC-930718) id AA29266 to modemmgt@apache.Sunnyvale.Telebit.COM; Mon, 31 Jan 94 14:04:47 PST
Date: Mon, 31 Jan 1994 14:04:47 -0800
Sender: ietf-archive-request@IETF.CNRI.Reston.VA.US
From: "Mark S. Lewis" <mlewis@telebit.com>
Message-Id: <9401312204.AA29266@america.Sunnyvale.Telebit.COM>
Received: by yoyo.telebit.com (4.1/SMI-4.1) id AA18001; Mon, 31 Jan 94 14:04:47 PST
To: Les_Brown-LLB005@email.mot.com
Cc: modemmgt@telebit.com
In-Reply-To: <Macintosh*/PRMD=ILBE/ADMD=MOT/C=US/@ilbe> (Les_Brown-LLB005@email.mot.com)
Subject: Re: MIB Comments 11
Reply-To: Mark.S.Lewis@telebit.com
Mime-Version: 1.0
Content-Type: text/plain; charset="US-ASCII"
>>>>> On Mon, 31 Jan 94 04:52:29 -0600, Les_Brown-LLB005@email.mot.com said: > If we include the call progress detect object, which includes the ability to > 'blind dial', we also need to have an object to set the time to wait for dial > tone before beginning to blind dial. The following object meets this > requirement: > mdmPauseBeforeBlindDialingTime OBJECT-TYPE > SYNTAX TimeInterval > MAX-ACCESS read-write > STATUS current > DESCRIPTION > .fi > .in +1.25i > "This parameter specifies the amount of time, in seconds, that the modem shall > wait between connecting to the line and beginning to dial, when dial-tone > detection is not implemented or enabled (ie. ' blind dialing ', for example, the > ATX1 command in TIA-602). In TIA-602, this is controlled by the value in the S6 > register. In V.58, this functionality is included in the 'dialToneDetection' > object." > .in -1.25i > .nf > DEFVAL { 2 } > ::= { mdmCallControl X } I don't follow you here. mdmCCCallProgressDetect controls the detection and messaging of dial & busy tones. It does not specify any action (eg. 'blind dialing'). It doesn't sound to me like we need mdmPauseBeforeBlindDialingTime because of mdmCCCallProgressDetect. Is there some other reason? ... Mark ==========-------------- Mark S. Lewis ----------========== Mark.S.Lewis@Telebit.com Telebit Corp. Voice (408) 745-3232
- MIB comments (Part 1) Les_Brown-LLB005
- Re: MIB comments 1 Steven Waldbusser
- Re: MIB Comments 7 Mark S. Lewis
- Re: MIB Comments 11 Mark S. Lewis
- Re: MIB Comments 14 Steven Waldbusser
- Re: MIB Comments 12 Mark S. Lewis
- Re: Re MIB Comments 11 Mark S. Lewis
- Re: Modemmgt Working Group status Steven Waldbusser
- Recognizing Consensus Bob Stewart
- RE: Modemmgt Working Group status Mark S. Lewis
- Re: Recognizing Consensus Bill Norton
- Re: Recognizing Consensus Bob Stewart