Concensus items

[Steven Waldbusser <[e-mail]>]

After studying the mailing list and gathering other opinions, I
believe that we have concensus on the following items.  If anyone
strongly objects to any of these points, they should raise the issue
on the mailing list quickly.


1. 'mdmCCErrorControlUsed' should be the error control group, 
'mdmCCCompressionTypeUsed' should be in the data compression group,
and mdmCCCurrentLineRate and mdmModulationSchemeUsed should be in the
signalConvertor group.  These three groups would be created as a
result of this action.

2. Delete the mdmCallProgressDetect object

3. Delete the mdmStatsDTERingNoAnswers object and change the
definition of mdmStatsRingNoAnswers to:

            "The number of events in which the modem has detected
            ringing, but the call was not answered."

4. Move the compression efficency object to the mdmStats group and
rename it mdmStatsCompressionEfficiency.  Calls without compression
shall have a value of '100'.

5. Delete mdmCCAutoAnswerEnable and define a zero value of
mdmCCRingsBeforeAnswer to disable Auto Answer.

6. mdmStatsSentDataFrames shall be defined as follows:

    mdmStatsSentDataFrames OBJECT-TYPE
        SYNTAX      Counter32
        MAX-ACCESS  read-only
        STATUS      current
        DESCRIPTION
            "The number of data frames sent on the line interface.  If
            there is no frame-oriented protocol in use on the line
            interface, this counter shall not increment." 
        ::= { mdmStatsEntry 20 }

7. Delete mdmLineCarrierLossControl and define a '255' value of
mdmLineCarrierLossTime to disable carrier loss disconnects.

8. Add object id registrations for v21, v23CC, v23SC, v25bis, v26bis,
v26ter, v27ter, v32terbo, v34, and V.FC.

9. Cap the length of dial strings at 64.

10. Split Current line rate into transmit rate and receive rate objects.