Re: [OAUTH-WG] open redirect in rfc6749

[Hans Zandbelt <[e-mail]>]

Classifying like this must also mean that consent should not be stored 
until the client is considered (admin) trusted, and admin policy would 
interfere with user policy.

IMHO the security consideration would apply only to dynamically 
registered clients where registration is unrestricted; any other form 
would involve some form of admin/user approval at registration time, 
overcoming the concern at authorization time: there's no auto-redirect 
flow possible for unknown clients.

Hans.

On 9/4/14, 9:04 AM, Richer, Justin P. wrote:
> I think this advice isn't a bad idea, though it's of course up to the AS
> what an "untrusted" client really is. In practice, this is something
> that was registered by a non-sysadmin type person, either a dynamically
> registered client or something available through self-service
> registration of some type. It's also reasonable that a client, even
> dynamically registered, would be considered "trusted" if enough time has
> passed and enough users have used it without things blowing up.
>
>   -- Justin
>
> On Sep 4, 2014, at 1:26 AM, Antonio Sanso <[e-mail]
> <mailto:[e-mail]>> wrote:
>
>> hi again *,
>>
>> after thinking a bit further IMHO an alternative for the untrusted
>> clients can also be to always present the consent screen (at least
>> once) before any redirect.
>> Namely all providers I have seen show the consent screen if all the
>> request parameters are correct and if the user accepts the redirect
>> happens.
>> If one of the parameter  (with the exclusion of the client id and
>> redirect uri that are handled differently as for spec) is wrong though
>> the redirect happens without the consent screen being shown..
>>
>> WDYT?
>>
>> regards
>>
>> antonio
>>
>> On Sep 3, 2014, at 7:54 PM, Antonio Sanso <[e-mail]
>> <mailto:[e-mail]>> wrote:
>>
>>> Well,
>>> I do not know if this is only dynamic registration...
>>> let’s talk about real use cases, namely e.g. Google , Facebook ,
>>> etc.. is that dynamic client registration? I do not know… :)
>>>
>>> Said that what the other guys think?  :)
>>> Would this deserve some “spec adjustment” ? I mean there is a reason
>>> if Google is by choice “violating” the spec right? (I assume to avoid
>>> open redirect…)
>>> But other implementers do follow the spec hence they have this open
>>> redirector… and this is not nice IMHO...
>>>
>>>
>>> On Sep 3, 2014, at 7:40 PM, Hans Zandbelt <[e-mail]
>>> <mailto:[e-mail]>> wrote:
>>>
>>>> On 9/3/14, 7:14 PM, Antonio Sanso wrote:
>>>>>
>>>>> On Sep 3, 2014, at 7:10 PM, Hans Zandbelt
>>>>> <[e-mail] <mailto:[e-mail]>> wrote:
>>>>>
>>>>>> Is your concern clients that were registered using dynamic client
>>>>>> registration?
>>>>>
>>>>> yes
>>>>
>>>> I think your issue is then with the trust model of dynamic client
>>>> registration; that is left out of scope of the dynreg spec (and the
>>>> concept is not even part of the core spec), but unless you want
>>>> everything to be open (which typically would not be the case), then
>>>> it would involve approval somewhere in the process before the client
>>>> is registered. Without dynamic client registration that approval is
>>>> admin based or resource owner based, depending on use case.
>>>>
>>>>>> Otherwise the positive case is returning a response to a valid URL
>>>>>> that belongs to a client that was registered explicitly by the
>>>>>> resource owner
>>>>>
>>>>> well AFAIK the resource owner doesn’t register clients…
>>>>
>>>> roles can collapse in use cases especially when using dynamic client
>>>> registration
>>>>
>>>>>> and the negative case is returning an error to that same URL.
>>>>>
>>>>> the difference is the consent screen… in the positive case you need
>>>>> to approve an app.. for the error case no approval is needed,,,
>>>>>
>>>>>>
>>>>>> I fail to see the open redirect.
>>>>>
>>>>> why?
>>>>
>>>> because the client and thus the fixed URL are explicitly approved at
>>>> some point
>>>>
>>>> Hans.
>>>>
>>>>>
>>>>>>
>>>>>> Hans.
>>>>>>
>>>>>> On 9/3/14, 6:56 PM, Antonio Sanso wrote:
>>>>>>>
>>>>>>> On Sep 3, 2014, at 6:51 PM, Hans Zandbelt
>>>>>>> <[e-mail] <mailto:[e-mail]>
>>>>>>> <mailto:[e-mail]>> wrote:
>>>>>>>
>>>>>>>> Let me try and approach this from a different angle: why would you
>>>>>>>> call it an open redirect when an invalid scope is provided and
>>>>>>>> call it
>>>>>>>> correct protocol behavior (hopefully) when a valid scope is
>>>>>>>> provided?
>>>>>>>
>>>>>>> as specified below in the positive case (namely when the correct
>>>>>>> scope
>>>>>>> is provided) the resource owner MUST approve the app via the consent
>>>>>>> screen (at least once).
>>>>>>>
>>>>>>>
>>>>>>>>
>>>>>>>> Hans.
>>>>>>>>
>>>>>>>> On 9/3/14, 6:46 PM, Antonio Sanso wrote:
>>>>>>>>> hi John,
>>>>>>>>> On Sep 3, 2014, at 6:14 PM, John Bradley <[e-mail]
>>>>>>>>> <mailto:[e-mail]>
>>>>>>>>> <mailto:[e-mail]>
>>>>>>>>> <mailto:[e-mail]>> wrote:
>>>>>>>>>
>>>>>>>>>> In the example the redirect_uri is vlid for the attacker.
>>>>>>>>>>
>>>>>>>>>> The issue is that the AS may be allowing client registrations with
>>>>>>>>>> arbitrary redirect_uri.
>>>>>>>>>>
>>>>>>>>>> In the spec it is unspecified how a AS validates that a client
>>>>>>>>>> controls the redirect_uri it is registering.
>>>>>>>>>>
>>>>>>>>>> I think that if anything it may be the registration step that
>>>>>>>>>> needs
>>>>>>>>>> the security consideration.
>>>>>>>>>
>>>>>>>>> (this is the first time :p) but I do disagree with you. It would be
>>>>>>>>> pretty unpractical to block this at registration time….
>>>>>>>>> IMHO the best approach is the one taken from Google, namely
>>>>>>>>> returning
>>>>>>>>> 400 with the cause of the error..
>>>>>>>>>
>>>>>>>>> *400.* That’s an error.
>>>>>>>>>
>>>>>>>>> *Error: invalid_scope*
>>>>>>>>>
>>>>>>>>> Some requested scopes were invalid. {invalid=[l]}
>>>>>>>>>
>>>>>>>>> said that I hope you all agree this is an issue in the spec so
>>>>>>>>> far….
>>>>>>>>>
>>>>>>>>> regards
>>>>>>>>>
>>>>>>>>> antonio
>>>>>>>>>
>>>>>>>>>>
>>>>>>>>>> John B.
>>>>>>>>>>
>>>>>>>>>> On Sep 3, 2014, at 12:10 PM, Bill Burke <[e-mail]
>>>>>>>>>> <mailto:[e-mail]>
>>>>>>>>>> <mailto:[e-mail]>
>>>>>>>>>> <mailto:[e-mail]>> wrote:
>>>>>>>>>>
>>>>>>>>>>> I don't understand.  The redirect uri has to be valid in
>>>>>>>>>>> order for a
>>>>>>>>>>> redirect to happen.  The spec explicitly states this.
>>>>>>>>>>>
>>>>>>>>>>> On 9/3/2014 11:43 AM, Antonio Sanso wrote:
>>>>>>>>>>>> hi *,
>>>>>>>>>>>>
>>>>>>>>>>>> IMHO providers that strictly follow rfc6749 are vulnerable
>>>>>>>>>>>> to open
>>>>>>>>>>>> redirect.
>>>>>>>>>>>> Let me explain, reading [0]
>>>>>>>>>>>>
>>>>>>>>>>>> If the request fails due to a missing, invalid, or mismatching
>>>>>>>>>>>> redirection URI, or if the client identifier is missing or
>>>>>>>>>>>> invalid,
>>>>>>>>>>>> the authorization server SHOULD inform the resource owner of the
>>>>>>>>>>>> error and MUST NOT automatically redirect the user-agent to the
>>>>>>>>>>>> invalid redirection URI.
>>>>>>>>>>>>
>>>>>>>>>>>> If the resource owner denies the access request or if the
>>>>>>>>>>>> request
>>>>>>>>>>>> fails for reasons other than a missing or invalid
>>>>>>>>>>>> redirection URI,
>>>>>>>>>>>> the authorization server informs the client by adding the
>>>>>>>>>>>> following
>>>>>>>>>>>> parameters to the query component of the redirection URI
>>>>>>>>>>>> using the
>>>>>>>>>>>> "application/x-www-form-urlencoded" format, perAppendix B
>>>>>>>>>>>> <https://tools.ietf.org/html/rfc6749#appendix-B>:
>>>>>>>>>>>>
>>>>>>>>>>>> Now let’s assume this.
>>>>>>>>>>>> I am registering a new client to thevictim.com
>>>>>>>>>>>> <http://thevictim.com/>
>>>>>>>>>>>> <http://victim.com/><http://victim.com <http://victim.com/>
>>>>>>>>>>>> <http://victim.com/>>
>>>>>>>>>>>> <http://victim.com <http://victim.com/> <http://victim.com/>>
>>>>>>>>>>>> provider.
>>>>>>>>>>>> I register redirect uriattacker.com <http://uriattacker.com/>
>>>>>>>>>>>> <http://attacker.com/><http://attacker.com
>>>>>>>>>>>> <http://attacker.com/> <http://attacker.com/>>
>>>>>>>>>>>> <http://attacker.com <http://attacker.com/>
>>>>>>>>>>>> <http://attacker.com/>>.
>>>>>>>>>>>>
>>>>>>>>>>>> According to [0] if I pass e.g. the wrong scope I am redirected
>>>>>>>>>>>> back to
>>>>>>>>>>>> attacker.com <http://attacker.com/>
>>>>>>>>>>>> <http://attacker.com/><http://attacker.com
>>>>>>>>>>>> <http://attacker.com/>
>>>>>>>>>>>> <http://attacker.com/>> <http://attacker.com
>>>>>>>>>>>> <http://attacker.com/> <http://attacker.com/>>.
>>>>>>>>>>>> Namely I prepare a url that is in this form:
>>>>>>>>>>>>
>>>>>>>>>>>> http://victim.com/authorize?response_type=code&client_id=bc88FitX1298KPj2WS259BBMa9_KCfL3&scope=WRONG_SCOPE&redirect_uri=http://attacker.com
>>>>>>>>>>>>
>>>>>>>>>>>> and this is works as an open redirector.
>>>>>>>>>>>> Of course in the positive case if all the parameters are
>>>>>>>>>>>> fine this
>>>>>>>>>>>> doesn’t apply since the resource owner MUST approve the app
>>>>>>>>>>>> via the
>>>>>>>>>>>> consent screen (at least once).
>>>>>>>>>>>>
>>>>>>>>>>>> A solution would be to return error 400 rather than redirect
>>>>>>>>>>>> to the
>>>>>>>>>>>> redirect URI (as some provider e.g. Google do)
>>>>>>>>>>>>
>>>>>>>>>>>> WDYT?
>>>>>>>>>>>>
>>>>>>>>>>>> regards
>>>>>>>>>>>>
>>>>>>>>>>>> antonio
>>>>>>>>>>>>
>>>>>>>>>>>> [0] https://tools.ietf.org/html/rfc6749#section-4.1.2.1
>>>>>>>>>>>>
>>>>>>>>>>>>
>>>>>>>>>>>> _______________________________________________
>>>>>>>>>>>> OAuth mailing list
>>>>>>>>>>>> [e-mail] <mailto:[e-mail]>
>>>>>>>>>>>> https://www.ietf.org/mailman/listinfo/oauth
>>>>>>>>>>>>
>>>>>>>>>>>
>>>>>>>>>>> --
>>>>>>>>>>> Bill Burke
>>>>>>>>>>> JBoss, a division of Red Hat
>>>>>>>>>>> http://bill.burkecentral.com <http://bill.burkecentral.com/>
>>>>>>>>>>>
>>>>>>>>>>> _______________________________________________
>>>>>>>>>>> OAuth mailing list
>>>>>>>>>>> [e-mail] <mailto:[e-mail]> <mailto:[e-mail]>
>>>>>>>>>>> https://www.ietf.org/mailman/listinfo/oauth
>>>>>>>>>>
>>>>>>>>>> _______________________________________________
>>>>>>>>>> OAuth mailing list
>>>>>>>>>> [e-mail] <mailto:[e-mail]>
>>>>>>>>>> <mailto:[e-mail]><mailto:[e-mail]>
>>>>>>>>>> https://www.ietf.org/mailman/listinfo/oauth
>>>>>>>>>
>>>>>>>>>
>>>>>>>>>
>>>>>>>>> _______________________________________________
>>>>>>>>> OAuth mailing list
>>>>>>>>> [e-mail] <mailto:[e-mail]> <mailto:[e-mail]>
>>>>>>>>> https://www.ietf.org/mailman/listinfo/oauth
>>>>>>>>>
>>>>>>>>
>>>>>>>> --
>>>>>>>> Hans Zandbelt              | Sr. Technical Architect
>>>>>>>> [e-mail] <mailto:[e-mail]>
>>>>>>>> <mailto:[e-mail]>| Ping
>>>>>>>> Identity
>>>>>>>
>>>>>>
>>>>>> --
>>>>>> Hans Zandbelt              | Sr. Technical Architect
>>>>>> [e-mail] <mailto:[e-mail]> |
>>>>>> Ping Identity
>>>>>
>>>>
>>>> --
>>>> Hans Zandbelt              | Sr. Technical Architect
>>>> [e-mail] <mailto:[e-mail]>| Ping
>>>> Identity
>>>
>>
>> _______________________________________________
>> OAuth mailing list
>> [e-mail] <mailto:[e-mail]>
>> https://www.ietf.org/mailman/listinfo/oauth
>

-- 
Hans Zandbelt              | Sr. Technical Architect
[e-mail] | Ping Identity