Re: [OAUTH-WG] OAuth 2.1: dropping password grant
Dick Hardt <dick.hardt@gmail.com> Fri, 28 February 2020 21:03 UTC
Return-Path: <dick.hardt@gmail.com>
X-Original-To: oauth@ietfa.amsl.com
Delivered-To: oauth@ietfa.amsl.com
Received: from localhost (localhost [127.0.0.1]) by ietfa.amsl.com (Postfix) with ESMTP id 00BF43A1DE4 for <oauth@ietfa.amsl.com>; Fri, 28 Feb 2020 13:03:58 -0800 (PST)
X-Virus-Scanned: amavisd-new at amsl.com
X-Spam-Flag: NO
X-Spam-Score: -2.096
X-Spam-Level:
X-Spam-Status: No, score=-2.096 tagged_above=-999 required=5 tests=[BAYES_00=-1.9, DKIM_SIGNED=0.1, DKIM_VALID=-0.1, DKIM_VALID_AU=-0.1, DKIM_VALID_EF=-0.1, FREEMAIL_FROM=0.001, HTML_FONT_LOW_CONTRAST=0.001, HTML_MESSAGE=0.001, SPF_HELO_NONE=0.001, SPF_PASS=-0.001, URIBL_BLOCKED=0.001] autolearn=ham autolearn_force=no
Authentication-Results: ietfa.amsl.com (amavisd-new); dkim=pass (2048-bit key) header.d=gmail.com
Received: from mail.ietf.org ([4.31.198.44]) by localhost (ietfa.amsl.com [127.0.0.1]) (amavisd-new, port 10024) with ESMTP id ACMN9ECetBot for <oauth@ietfa.amsl.com>; Fri, 28 Feb 2020 13:03:54 -0800 (PST)
Received: from mail-lf1-x143.google.com (mail-lf1-x143.google.com [IPv6:2a00:1450:4864:20::143]) (using TLSv1.2 with cipher ECDHE-RSA-AES128-GCM-SHA256 (128/128 bits)) (No client certificate requested) by ietfa.amsl.com (Postfix) with ESMTPS id 761183A1DD8 for <oauth@ietf.org>; Fri, 28 Feb 2020 13:03:53 -0800 (PST)
Received: by mail-lf1-x143.google.com with SMTP id n25so3138508lfl.0 for <oauth@ietf.org>; Fri, 28 Feb 2020 13:03:53 -0800 (PST)
DKIM-Signature: v=1; a=rsa-sha256; c=relaxed/relaxed; d=gmail.com; s=20161025; h=mime-version:references:in-reply-to:from:date:message-id:subject:to :cc; bh=/fM/nttRh2YHSngKkE+FnrHBIadjpoRRvPhU8ccTdAg=; b=lohKyN64VEsniexy/p2Yyv4OXa5TqbkoOcsJhYbh6Ty0ljcJptP9Lr+szEE85wZcvu TeIk8hiCDN1BrwRkS7sNvRaf8ut+zxcU+TDMZkOTkYcGXgadWAa16YR8rQLJRG3iRbEh cCW5Chzd8AJ2eLCZbvMeAMVivhtASfkOhfiwMO3KnCJXNsfZUry2BoCsh7TA0vetXFiq X4Ue50sQydp6X+28UYU7Jm2bWgW8zybRxRJM7gtrYNPbxHsq0xQ4hyIClThVNbGoui5w 6U2nBxwe/TDW9je5KsTXYJH2iRY25taYrRxNYabUFiRTSNOOimTrwZo57qPlbcY7pmAn Eulg==
X-Google-DKIM-Signature: v=1; a=rsa-sha256; c=relaxed/relaxed; d=1e100.net; s=20161025; h=x-gm-message-state:mime-version:references:in-reply-to:from:date :message-id:subject:to:cc; bh=/fM/nttRh2YHSngKkE+FnrHBIadjpoRRvPhU8ccTdAg=; b=BdSyD213KI8+qz9R92PKNrSSS82kCAP+1241tQcYEM0YgEl1fMU0DVERhMUxeKb9Za tc7i7J0Vp+Td1ghvPDTFNXN5NIlL9GPxv9pBNpdX8FFyqGna/1bHyQyqI/W+QY9t7OZ7 iUIX/+GXDxbZ3TKV+JNd2x0xK+g05M5Pf0D+XSvUdLEj8c5c8BXLGWXEPeAxBdnBtksq 5Y68FON2PKE29OsCD0oiZkBOyWmS7LoY+9PUZ/AzXVaO3JKy9rGJSR26E60SGLY4E4eC sneNRKyEyCiZGqOZi9JmNwz18JD/Vbzc0jUhR+qmuGMTyhXncN1eejzSn7RNizpRL9Ub RxLQ==
X-Gm-Message-State: ANhLgQ3tXy09qayLXfuLgWCtvPdD2qm4yN84TiW4NRHHOJinn9IAvmn6 wU3gUtccK5XQl6nR22v3taT9B4EP5pAIS1tObaI=
X-Google-Smtp-Source: ADFU+vuDeOmbyh+s8TWpqpyOZz3pTCVfTEO9u30UbFkVNH4StfhOdrGHIqYGYVFW91ovIHqKSho8ylwsg/42Fq4jPe0=
X-Received: by 2002:a05:6512:10c2:: with SMTP id k2mr3705116lfg.0.1582923831476; Fri, 28 Feb 2020 13:03:51 -0800 (PST)
MIME-Version: 1.0
References: <3A39A586-7ABE-4CA2-BAE0-ED3FD197C4BB@forgerock.com> <7C28AD9B-428E-4FB3-B41A-E707D0C1A296@lodderstedt.net> <E37187C7-9DD0-4C3B-990D-55CB8C39BD21@forgerock.com> <CAD9ie-trV02ifD8HU1JQ-FDS0=eLnikM7SWfd1hSHkn5_3m03Q@mail.gmail.com> <649A1EF4-EB80-4FB0-82D4-4F6E3535F774@forgerock.com> <CANsTMfEAoOa6ts8xPc5eZi+D09EOC11-07uUq9R5gD425EbUJg@mail.gmail.com> <9D8B2697-7B09-4CB1-9000-524AACB36D67@forgerock.com> <0C4103FE-12A1-4CB2-8D07-3CEF7D3B4340@lodderstedt.net> <3E680750-FDA1-4513-A2FE-B3E900EBE806@forgerock.com> <55991949-9B1A-44E1-B412-1BB8EAEA4A43@lodderstedt.net> <AAE487F7-776C-472B-B6DF-CB60D434F95A@forgerock.com> <6AFD3B88-CEE5-4857-845D-A866DF5C3DFE@amazon.com> <045164C6-685B-45FE-A6F6-0E15DBD5FE08@mit.edu> <5820B70D-1935-4A78-BD53-42AC2DF36336@forgerock.com> <CA+k3eCTrMQYxjW6CSkvxEM_fbKob65yXktP4nR0z5ztdYCZ3yw@mail.gmail.com> <CAGBSGjpY203mRG8ujVawnJjajE236OvqtMYYHVeBSgvq53+wsA@mail.gmail.com> <F3BD297D-CC73-4FFE-93FF-B37277BDAC87@forgerock.com> <3aa0ac2f-f480-4054-974c-cf468f6070be@Spark>
In-Reply-To: <3aa0ac2f-f480-4054-974c-cf468f6070be@Spark>
From: Dick Hardt <dick.hardt@gmail.com>
Date: Fri, 28 Feb 2020 13:03:24 -0800
Message-ID: <CAD9ie-vb9ktNc=91aQnXPs+0n9Esjp5HHPGL+-CBpAaYg58a3A@mail.gmail.com>
To: Nat Sakimura <sakimura@gmail.com>
Cc: Aaron Parecki <aaron@parecki.com>, Neil Madden <neil.madden@forgerock.com>, Brian Campbell <bcampbell=40pingidentity.com@dmarc.ietf.org>, Matthew De Haast <matt=40coil.com@dmarc.ietf.org>, "oauth@ietf.org" <oauth@ietf.org>, "Richard Backman, Annabelle" <richanna=40amazon.com@dmarc.ietf.org>
Content-Type: multipart/alternative; boundary="000000000000ae867c059fa92ced"
Archived-At: <https://mailarchive.ietf.org/arch/msg/oauth/prddImfdbJokrUKXC3aUFVhUcgc>
Subject: Re: [OAUTH-WG] OAuth 2.1: dropping password grant
X-BeenThere: oauth@ietf.org
X-Mailman-Version: 2.1.29
Precedence: list
List-Id: OAUTH WG <oauth.ietf.org>
List-Unsubscribe: <https://www.ietf.org/mailman/options/oauth>, <mailto:oauth-request@ietf.org?subject=unsubscribe>
List-Archive: <https://mailarchive.ietf.org/arch/browse/oauth/>
List-Post: <mailto:oauth@ietf.org>
List-Help: <mailto:oauth-request@ietf.org?subject=help>
List-Subscribe: <https://www.ietf.org/mailman/listinfo/oauth>, <mailto:oauth-request@ietf.org?subject=subscribe>
X-List-Received-Date: Fri, 28 Feb 2020 21:03:58 -0000
It looks like there is consensus to remove ROPC for a user -- but that the password grant is not a bad practice for service accounts. That leads to providing clarity on service accounts. 1) add service account grant to the OAuth 2.1 document 2) write an OAuth 2.1 extension for service account grants. (the grant type could continue to be "password", but now clearly in the context of a service account in a different document) With the goal of OAuth 2.1 being a capture of all the best practices, (2) makes more sense as it could discuss all aspects of service accounts including mapping a client to a service account. What do others think? ᐧ On Tue, Feb 25, 2020 at 6:17 AM Nat Sakimura <sakimura@gmail.com> wrote: > Let us do it then and deprecate ROPC. > There definitely are use-cases that need this pattern around me as well, > but we are using JWT bearer grant instead. Standardizing the behavior is > good. I am fine with new service_account grant type as well, btw. > > Nat > 2020年2月25日 20:41 +0900、Neil Madden <neil.madden@forgerock.com> のメール: > > I’d be open to defining a new service_account grant type and > removing/deprecating the ROPC grant. I’d also be happy if we just said that > service account flows should use the JWT bearer grant, and we document the > best practices around that and encourage client libs to implement support > for it. > > Should there be a dedicated draft for best practices for > service-to-service usage? > > — Neil > > On 25 Feb 2020, at 00:13, Aaron Parecki <aaron@parecki.com> wrote: > > I think we might be going about this discussion the wrong way. > > On Mon, Feb 24, 2020 at 9:04 AM Brian Campbell <bcampbell= > 40pingidentity.com@dmarc.ietf.org> wrote: > Concur with the sentiment expressed by Neil here. > > On Fri, Feb 21, 2020 at 3:32 PM Neil Madden <neil.madden@forgerock.com> > wrote: > I’m not really sure the WG should be telling people what they “ought to be > doing” unless we have concrete security or interoperability reasons for > doing so. > > I 100% agree that the job of a standard is not to tell people "what they > ought to be doing". Instead, a standard is more about documenting the > current state of the art as deployed in existing implementations. > > With that in mind, I think that leaves us with two concrete problems with > the password grant: > > 1) The actual problem with the password grant is end users entering > passwords in applications, which the group (mostly) agrees on > 2) People are re-appropriating the password grant for things like service > accounts or backends that are inflexible, not actually using it for end > user credentials > > So it seems like there's actually something missing from OAuth which is > leading people to find the password grant and use that because it's the > only thing that most closely fits their existing model. It seems like we'd > be better off defining a new extension that captures the use case people > are actually doing, instead of encouraging the continuing use of the > password grant for this purpose. > > ---- > Aaron Parecki > aaronparecki.com > @aaronpk > > > > On Mon, Feb 24, 2020 at 9:04 AM Brian Campbell <bcampbell= > 40pingidentity.com@dmarc.ietf.org> wrote: > Concur with the sentiment expressed by Neil here. > > On Fri, Feb 21, 2020 at 3:32 PM Neil Madden <neil.madden@forgerock.com> > wrote: > I’m not really sure the WG should be telling people what they “ought to be > doing” unless we have concrete security or interoperability reasons for > doing so. > > I also don’t agree that people doing this are doing anything wrong. I > don’t always agree with what our customers do, but I’ve learnt over the > years not to second-guess their reasons for doing it. > > Are Google wrong for using the JWT bearer grant (not client credentials) > and service accounts? They even go so far as to say “scopes are not a > security mechanism” [1] and tell people to use service account roles > instead. (Precisely because they also support non-OAuth auth methods, which > bypass any scopes). > > Are we really going to tell them to rewrite it all to use the client > credentials grant? > > [1]: > https://cloud.google.com/compute/docs/access/service-accounts#accesscopesiam > > On 21 Feb 2020, at 21:04, Justin Richer <jricher@mit.edu> wrote: > > +1. I’ve seen this anti-pattern deployed all over the place, and it’s time > to get rid of it and send people toward what they really ought to be doing. > > Another thing I’ve seen is using different service accounts to get > different sets of access for one client — if you’re doing that, you’ve got > a client pretending to do two different things, or your APIs should be > using scopes to differentiate access instead of client/user identity. > > — Justin > > On Feb 21, 2020, at 3:28 PM, Richard Backman, Annabelle <richanna= > 40amazon.com@dmarc.ietf.org> wrote: > > The client IDs can still be opaque identifiers provided by the AS, they > just happen to be associated with specific service accounts. Or they could > be the opaque IDs that the AS already issued for the service account. > Either way, the AS could issue a token with the appropriate subject and > other claims for the service account. > > If your client identity is bound to a specific service account identity > (i.e., the resource owner), then ROPC reduces down to Client Credentials. > What's the point in passing two identifiers and two credentials for the > same identity? > > – > Annabelle Backman (she/her) > AWS Identity > https://aws.amazon.com/identity/ > > > On 2/21/20, 6:48 AM, "OAuth on behalf of Neil Madden" < > oauth-bounces@ietf.org on behalf of neil.madden@forgerock.com> wrote: > > Sorry, I missed that message. > > While this may be a solution in specific circumstances, I don’t think it’s > a general solution. e.g. an AS may not allow manually choosing the > client_id to avoid things like > https://tools.ietf.org/html/draft-ietf-oauth-security-topics-14#section-4.13 > or may return different introspection results for client credentials tokens > (e.g. with no “sub”) and so on. In practice, this adds even more steps for > somebody to migrate from existing ROPC usage. > > This is asking people to make fundamental changes to their identity > architecture rather than simply switching to a new grant type.. > > — Neil > > On 21 Feb 2020, at 14:34, Torsten Lodderstedt <torsten@lodderstedt.net> > wrote: > > I see - we have gone full cycle :-) > > Annabelle’s proposal would solve that. Relate a client id to a service > account and obtain the token data from there. > > On 21. Feb 2020, at 15:31, Neil Madden <neil.madden@forgerock.com> wrote: > > Yes, that is great. But mTLS doesn’t support service accounts (!= > clients). Maybe it should? Should there be a mTLS *grant type*? > > — Neil > > On 21 Feb 2020, at 14:20, Torsten Lodderstedt <torsten@lodderstedt.net> > wrote: > > Have you ever tried the client credentials grant with mTLS? After reading > your description it seems to be simpler than JWT Bearer.. > > * work out if the AS even supports mTLS > * work out how to configure the AS to trust my cert(s) > * Create key pair and cert using openssl > * Register your (self-signed) cert along with your client_id > * Configure the HTTP client to use your key pair for TLS Client > Authentication > > Works very well for us. > > On 21. Feb 2020, at 15:12, Neil Madden <neil.madden@forgerock.com> wrote: > > No failures, but it is a much more complex grant type to set up, when you > consider everything you have to do: > > * work out if the AS even supports JWT bearer and how to turn it on > * work out how to configure the AS to trust my public key(s) > - do I have to create a new HTTPS endpoint to publish a JWK Set? > * determine the correct settings for issuer, audience, subject, etc. Does > the AS impose non-standard requirements? e.g. RFC 7523 says that the JWT > MUST contain a “sub” claim, but Google only allows this to be present if > your client is doing impersonation of an end-user (which requires > additional permissions). > * do I need a unique “jti” claim? (OIDC servers do, plain OAuth ones might > not) If I do, can I reuse the JWT or must it be freshly signed for every > call? > * locate and evaluate a JWT library for my language of choice. Monitor > that new dependency for security advisories. > * choose a suitable signature algorithm (‘ere be dragons) > * figure out how to distribute the private key to my service > > Compared to “create a service account and POST the username and password > to the token endpoint” it adds a little friction. (It also adds a lot of > advantages, but it is undeniably more complex). > > — Neil > > > On 21 Feb 2020, at 13:41, Matthew De Haast <matt=40coil.com@dmarc.ietf.org> > wrote: > > I have a feeling that if we had more concise JWT libraries and command > line tools, where using the JWT Bearer grant became a one-liner again then > we wouldn’t be having this conversation. So perhaps removing it is an > incentive to make that happen. > > Neil could you elaborate more on this please. What failures are you > currently experiencing/seeing with the JWT Bearer grant? > > Matt > > On Thu, Feb 20, 2020 at 12:42 AM Neil Madden <neil.madden@forgerock.com> > wrote: > I have a feeling that if we had more concise JWT libraries and command > line tools, where using the JWT Bearer grant became a one-liner again then > we wouldn’t be having this conversation. So perhaps removing it is an > incentive to make that happen. > > > On 19 Feb 2020, at 22:01, Dick Hardt <dick.hardt@gmail.com> wrote: > > Neil: are you advocating that password grant be preserved in 2.1? Or do > you think that service account developers know enough about what they are > doing to follow what is in 6749? > ᐧ > > On Wed, Feb 19, 2020 at 1:52 PM Neil Madden <neil.madden@forgerock..com> > wrote: > OAuth2 clients are often private to the AS - they live in a database that > only the AS can access, have attributes specific to their use in OAuth2, > and so on. Many existing systems have access controls based on users, > roles, permissions and so on and expect all users accessing the system to > exist in some user repository, e.g. LDAP, where they can be looked up and > appropriate permissions determined. A service account can be created inside > such a system as if it was a regular user, managed through the normal > account provisioning tools, assigned permissions, roles, etc. > > Another reason is that sometimes OAuth is just one authentication option > out of many, and so permissions assigned to service accounts are preferred > over scopes because they are consistently applied no matter how a request > is authenticated. This is often the case when OAuth has been retrofitted to > an existing system and they need to preserve compatibility with already > deployed clients. > > See e.g. Google cloud platform (GCP): > https://developers.google.com/identity/protocols/OAuth2ServiceAccount > They use the JWT bearer grant type for service account authentication and > assign permissions to those service accounts and typically have very broad > scopes. For service-to-service API calls you typically get an access token > with a single scope that is effectively “all of GCP” and everything is > managed at the level of permissions on the RO service account itself. They > only break down fine-grained scopes when you are dealing with user data and > will be getting an access token approved by a real user (through a normal > auth code flow). > > — Neil > > On 19 Feb 2020, at 21:35, Torsten Lodderstedt <torsten@lodderstedt.net> > wrote: > > Can you explain more in detail why the client credentials grant type isn’t > applicable for the kind of use cases you mentioned? > > Am 19.02.2020 um 22:03 schrieb Neil Madden <neil.madden@forgerock.com>: > > I very much agree with this with regards to real users. > > The one legitimate use-case for ROPC I’ve seen is for service accounts - > where you essentially want something like client_credentials but for > whatever reason you need the RO to be a service user rather than an OAuth2 > client (typically so that some lower layer of the system can still perform > its required permission checks). > > There are better grant types for this - e.g. JWT bearer - but they are a > bit harder to implement. Having recently converted some code from ROPC to > JWT bearer for exactly this use-case, it went from a couple of lines of > code to two screens of code. For service to service API calls within a > datacenter I’m not convinced this resulted in a material increase in > security for the added complexity. > > — Neil > > On 18 Feb 2020, at 21:57, Hans Zandbelt <hans.zandbelt@zmartzone.eu> > wrote: > > I would also seriously look at the original motivation behind ROPC: I know > it has been deployed and is used in quite a lot of places but I have never > actually come across a use case where it is used for migration purposes and > the migration is actually executed (I know that is statistically not a very > strong argument but I challenge others to come up with one...) > In reality it turned out just to be a one off that people used as an easy > way out to stick to an anti-pattern and still claim to do OAuth 2.0. It is > plain wrong, it is not OAuth and we need to get rid of it. > > Hans. > > On Tue, Feb 18, 2020 at 10:44 PM Aaron Parecki <aaron@parecki.com> wrote: > Agreed. Plus, the Security BCP is already effectively acting as a grace > period since it currently says the password grant MUST NOT be used, so in > the OAuth 2.0 world that's already a pretty strong signal.. > > Aaron > > > > On Tue, Feb 18, 2020 at 4:16 PM Justin Richer <jricher@mit.edu> wrote: > There is no need for a grace period. People using OAuth 2..0 can still do > OAuth 2.0. People using OAuth 2..1 will do OAuth 2.1. > > — Justin > > On Feb 18, 2020, at 3:54 PM, Anthony Nadalin <tonynad= > 40microsoft.com@dmarc.ietf.org> wrote: > > > I would suggest a SHOULD NOT instead of MUST, there are still sites using > this and a grace period should be provided before a MUST is pushed out as > there are valid use cases out there still. > > From: OAuth <oauth-bounces@ietf.org> On Behalf Of Dick Hardt > Sent: Tuesday, February 18, 2020 12:37 PM > To: oauth@ietf.org > Subject: [EXTERNAL] [OAUTH-WG] OAuth 2.1: dropping password grant > > Hey List > > (Once again using the OAuth 2.1 name as a placeholder for the doc that > Aaron, Torsten, and I are working on) > > In the security topics doc > > https://tools.ietf.org/html/draft-ietf-oauth-security-topics-14#section-2.4 > > The password grant MUST not be used. > > Some background for those interested. I added this grant into OAuth 2.0 to > allow applications that had been provided password to migrate. Even with > the caveats in OAuth 2.0, implementors decide they want to prompt the user > to enter their credentials, the anti-pattern OAuth was created to eliminate. > > > Does anyone have concerns with dropping the password grant from the OAuth > 2.1 document so that developers don't use it? > > /Dick > _______________________________________________ > OAuth mailing list > OAuth@ietf.org > https://www.ietf.org/mailman/listinfo/oauth > > > _______________________________________________ > OAuth mailing list > OAuth@ietf.org > https://www.ietf.org/mailman/listinfo/oauth > -- > ---- > Aaron Parecki > aaronparecki.com > @aaronpk > > _______________________________________________ > OAuth mailing list > OAuth@ietf.org > https://www.ietf.org/mailman/listinfo/oauth > > > -- > hans.zandbelt@zmartzone.eu > ZmartZone IAM - www.zmartzone.eu > _______________________________________________ > OAuth mailing list > OAuth@ietf.org > https://www.ietf.org/mailman/listinfo/oauth > > > _______________________________________________ > OAuth mailing list > OAuth@ietf.org > https://www.ietf..org/mailman/listinfo/oauth > > > _______________________________________________ > OAuth mailing list > OAuth@ietf.org > https://www.ietf.org/mailman/listinfo/oauth > > > _______________________________________________ > OAuth mailing list > OAuth@ietf.org > https://www.ietf.org/mailman/listinfo/oauth > _______________________________________________ > OAuth mailing list > OAuth@ietf.org > https://www.ietf.org/mailman/listinfo/oauth > > > _______________________________________________ > OAuth mailing list > OAuth@ietf.org > https://www.ietf.org/mailman/listinfo/oauth > > > > > > _______________________________________________ > OAuth mailing list > OAuth@ietf.org > https://www.ietf.org/mailman/listinfo/oauth > > > _______________________________________________ > OAuth mailing list > OAuth@ietf.org > https://www.ietf.org/mailman/listinfo/oauth > > > > _______________________________________________ > OAuth mailing list > OAuth@ietf.org > https://www.ietf.org/mailman/listinfo/oauth > > CONFIDENTIALITY NOTICE: This email may contain confidential and privileged > material for the sole use of the intended recipient(s). Any review, use, > distribution or disclosure by others is strictly prohibited.. If you have > received this communication in error, please notify the sender immediately > by e-mail and delete the message and any file attachments from your > computer. Thank you._______________________________________________ > OAuth mailing list > OAuth@ietf.org > https://www.ietf.org/mailman/listinfo/oauth > > > _______________________________________________ > OAuth mailing list > OAuth@ietf.org > https://www.ietf.org/mailman/listinfo/oauth > > _______________________________________________ > OAuth mailing list > OAuth@ietf.org > https://www.ietf.org/mailman/listinfo/oauth >
- [OAUTH-WG] OAuth 2.1: dropping password grant Dick Hardt
- Re: [OAUTH-WG] [EXTERNAL] OAuth 2.1: dropping pas… Anthony Nadalin
- Re: [OAUTH-WG] [EXTERNAL] OAuth 2.1: dropping pas… Dick Hardt
- Re: [OAUTH-WG] [EXTERNAL] OAuth 2.1: dropping pas… Justin Richer
- Re: [OAUTH-WG] [EXTERNAL] OAuth 2.1: dropping pas… Phillip Hunt
- Re: [OAUTH-WG] OAuth 2.1: dropping password grant Aaron Parecki
- Re: [OAUTH-WG] OAuth 2.1: dropping password grant Hans Zandbelt
- Re: [OAUTH-WG] [EXTERNAL] OAuth 2.1: dropping pas… Dick Hardt
- Re: [OAUTH-WG] OAuth 2.1: dropping password grant Neil Madden
- Re: [OAUTH-WG] OAuth 2.1: dropping password grant Torsten Lodderstedt
- Re: [OAUTH-WG] OAuth 2.1: dropping password grant Brock Allen
- Re: [OAUTH-WG] OAuth 2.1: dropping password grant Neil Madden
- Re: [OAUTH-WG] OAuth 2.1: dropping password grant Richard Backman, Annabelle
- Re: [OAUTH-WG] OAuth 2.1: dropping password grant Dick Hardt
- Re: [OAUTH-WG] OAuth 2.1: dropping password grant Neil Madden
- Re: [OAUTH-WG] OAuth 2.1: dropping password grant Matthew De Haast
- Re: [OAUTH-WG] OAuth 2.1: dropping password grant Neil Madden
- Re: [OAUTH-WG] OAuth 2.1: dropping password grant Torsten Lodderstedt
- Re: [OAUTH-WG] OAuth 2.1: dropping password grant Neil Madden
- Re: [OAUTH-WG] OAuth 2.1: dropping password grant Torsten Lodderstedt
- Re: [OAUTH-WG] OAuth 2.1: dropping password grant Neil Madden
- Re: [OAUTH-WG] OAuth 2.1: dropping password grant Levi Schuck
- Re: [OAUTH-WG] OAuth 2.1: dropping password grant Torsten Lodderstedt
- Re: [OAUTH-WG] OAuth 2.1: dropping password grant Neil Madden
- Re: [OAUTH-WG] OAuth 2.1: dropping password grant Torsten Lodderstedt
- Re: [OAUTH-WG] OAuth 2.1: dropping password grant Richard Backman, Annabelle
- Re: [OAUTH-WG] OAuth 2.1: dropping password grant Justin Richer
- Re: [OAUTH-WG] OAuth 2.1: dropping password grant Neil Madden
- Re: [OAUTH-WG] OAuth 2.1: dropping password grant Neil Madden
- Re: [OAUTH-WG] OAuth 2.1: dropping password grant Richard Backman, Annabelle
- Re: [OAUTH-WG] OAuth 2.1: dropping password grant Dick Hardt
- Re: [OAUTH-WG] OAuth 2.1: dropping password grant Phillip Hunt
- Re: [OAUTH-WG] OAuth 2.1: dropping password grant Neil Madden
- Re: [OAUTH-WG] OAuth 2.1: dropping password grant Neil Madden
- Re: [OAUTH-WG] OAuth 2.1: dropping password grant Brian Campbell
- Re: [OAUTH-WG] OAuth 2.1: dropping password grant William Denniss
- Re: [OAUTH-WG] OAuth 2.1: dropping password grant William Denniss
- Re: [OAUTH-WG] OAuth 2.1: dropping password grant Aaron Parecki
- Re: [OAUTH-WG] OAuth 2.1: dropping password grant lanerashaad80@gmail.com
- Re: [OAUTH-WG] OAuth 2.1: dropping password grant Neil Madden
- Re: [OAUTH-WG] OAuth 2.1: dropping password grant Nat Sakimura
- Re: [OAUTH-WG] OAuth 2.1: dropping password grant Dick Hardt
- Re: [OAUTH-WG] OAuth 2.1: dropping password grant Dominick Baier
- Re: [OAUTH-WG] OAuth 2.1: dropping password grant Phillip Hunt
- Re: [OAUTH-WG] OAuth 2.1: dropping password grant Dick Hardt
- Re: [OAUTH-WG] OAuth 2.1: dropping password grant Justin Richer