Re: Spin bit discussion - where we're at

[Roberto Peon <[e-mail]>]

Application developers have been abusing TCP for years (open up many concurrent connections, etc.), so this isn’t really new.
In any case, QUIC hides its congestion avoidance from the network only partially: the network will always be able to see the number of packets, inter-arrival timings, etc. for a flow on a 5-tuple.
“The network” also has the ability to tunnel packets however it likes within an ASN. Spin bits or other data could be included in such an encapsulation.
-=R

From: QUIC <[e-mail]> on behalf of Roland Zink <[e-mail]>
Date: Monday, November 27, 2017 at 3:33 AM
To: "[e-mail]" <[e-mail]>
Subject: Re: Spin bit discussion - where we're at

Am 27.11.2017 um 08:03 schrieb Jana Iyengar:
In addition to how the spin bit can be designed and used, I'd like those taking on this effort to consider this question: Whatever network management problem you're considering solving with a bit, what does it take to solve this problem without the bit exposed? I'm asking you to consider "zero-bit" solutions, or at least for a cost/benefit analysis of developing solutions with and without the spin bit for specific network management functions. Specifically,

(i) What's impossible or very difficult to do, from a network management perspective, of not having the spin bit? Note that I'm not asking for what is and is not measurable -- not everything measurable is useful. I'm specifically asking in terms of network management functions, in practice, as used by operators. Some of this has been addressed in the discussions/drafts I've seen, but I think it's most useful when framed in terms of network management functions.
I want to express the question about manageability from a different angle. QUIC moves the congestion control from being a common functionality in the kernel to application functionality. It also hides the protocol handling of congestion from the network. This gives incentives for application developers to change congestion control to give their application an advantage over others. No special rights are necessary. Now the question is does QUIC provide enough manageability to avoid an Internet (or some part of it) breakdown when it is misused? Can it be shown that this can't happen?


(ii) What are the alternatives for building the same functions without the spin bit? Let's consider for a moment that the spin bit isn't actually available in practice. What will operators do to continue managing their networks? This might be expensive, but that's precisely what I'm looking for -- the cost to operators of not having the spin bit. For instance, active probes are a fine way to measure network RTT within operator networks, and that is an alternative. There are surely others too. Their costs and limitations are important to know about in order to reason about their viability, so I'd like to see alternatives considered.
Solutions that only work within an operators network are not enough when more than one operator is involved.



I don't mean to start the discussion on this thread, but I'd like to urge those going off to do the writing to consider these questions.

- jana


On Sun, Nov 26, 2017 at 11:26 AM, MORTON, ALFRED C (AL) <[e-mail]<mailto:[e-mail]>> wrote:
Hi Brian, Stephen, Lars, Mark and all,

one join, one suggestion, and one question below.
see [ACM]
> -----Original Message-----
> From: QUIC [mailto:[e-mail]<mailto:[e-mail]>] On Behalf Of Brian Trammell
> (IETF)
> Sent: Wednesday, November 22, 2017 5:59 AM
> To: Eggert, Lars
> Cc: Mark Nottingham; QUIC WG; Stephen Farrell
> Subject: Re: Spin bit discussion - where we're at
>
> hi Lars,
>
> > On 22 Nov 2017, at 11:35, Eggert, Lars <[e-mail]<mailto:[e-mail]>> wrote:
> >
> > Hi,
> >
> > On 2017-11-22, at 11:01, Stephen Farrell <[e-mail]<mailto:[e-mail]>>
> wrote:
> >> What I thought was being requested and what I do think is reasonable
> >> is to document a privacy analysis for any quic protocol bits that are
> >> visible to the path. Whether or not some or all of that text ends up
> >> in some RFC is another day's work.
> > Lars wrote:
> > for the Spin Bit specifically, the intent was to permanently capture
> the analysis the DT has done, so that when others review the proposed
> Spin Bit specification, they can take that as a given and direct any
> further analysis to other aspects. It made sense to the chairs that that
> specific analysis should become part of the Spin Bit specification. I
> think we'd be open to a discussion on whether a broader document
> analyzing the QUIC wire image would be a better home for this. The main
> point is for the work that the DT has done to be documented.

> Brian wrote:
> Okay. That's somewhat more reasonable than what I read the ask to be
> ("we're going to gate this on the people who care about this doing some
> non-trivial amount of work"). Those of us who volunteer (help, please,
> anyone? :) ) can certainly pull together what we have in a single I-D
> and ask the WG what more it thinks it needs. To me all this seems pretty
> clear, but I've been working on this topic for a while.
[ACM]
Having reached the end of the "Thanksgiving thread",
I'm scrolling back a few pages to join the task of
permanently capturing the work of the DT in an I-D (at least):
There should be lasting value in some of our findings
and IMO they are worthy of a persistent reference.

> Lars wrote:
> > For proposals other than the Spin Bit (I think I have seen individual
> contributors at least mention "loss" and "congestion" bits, but without
> much detail), we wanted to clarify that we'd like to see an analysis and
> discussion of their privacy aspects to roughly the same degree as the DT
> has performed for the Spin Bit proposal.
>
[ACM]
I suggest that this might be a different I-D, at least to start.
Question: Is there a privacy analysis of present ECN available?
(a search yielded many results with Missing: privacy)

regards,
Al