RSERPOOL-MIB DEFINITIONS ::= BEGIN

IMPORTS
MODULE-IDENTITY,
OBJECT-TYPE,
experimental,
TimeTicks,
Unsigned32
FROM SNMPv2-SMI
TEXTUAL-CONVENTION
FROM SNMPv2-TC
MODULE-COMPLIANCE, OBJECT-GROUP
FROM SNMPv2-CONF
InetAddressType, InetAddress, InetPortNumber
FROM INET-ADDRESS-MIB;


-- ## Module definition ###########################################
rserpoolMIB MODULE-IDENTITY
LAST-UPDATED "200902031034Z" -- February 3, 2009
ORGANIZATION "IEM-TdR, UNIVERSITY OF DUISBURG-ESSEN"
CONTACT-INFO
" THOMAS-DREIBHOLZ

Postal:  University of Duisburg-Essen
Institute for Experimental Mathematics
Ellernstrasse 29
D-45326 Essen
Germany
Phone: +49-201-183-7637
Fax: +49-201-183-7673
Email: dreibh@iem.uni-due.de

JAIWANT-MULIK

Postal:  Delaware State University
CIS Department
1200 N. DuPont Hw
Dover, DE
USA 19904
Phone: +1-302-857-7910
Fax: +1-302-857-6552
Email: jaiwant@mulik.com"
DESCRIPTION
"The MIB module for managing an RSerPool implementation"
REVISION "200902031034Z" -- February 3, 2009
DESCRIPTION
"This version of the MIB module is published as RFC xxxx"
::= { experimental xxxxxx } -- To be IANA Assigned!!!



-- ## RSerPool type definitions ###################################
RSerPoolENRPServerIdentifier ::= TEXTUAL-CONVENTION
DISPLAY-HINT "x"
STATUS       current
DESCRIPTION  "The ID of an ENRP server"
SYNTAX       Unsigned32 (1..4294967295)

RSerPoolOperationScope ::= TEXTUAL-CONVENTION
DISPLAY-HINT "1024t"
STATUS       current
DESCRIPTION  "The ID of an operation scope"
SYNTAX       OCTET STRING (SIZE (0..65535))

RSerPoolPoolHandle ::= TEXTUAL-CONVENTION
DISPLAY-HINT "1024t"
STATUS       current
DESCRIPTION  "The pool handle"
SYNTAX       OCTET STRING (SIZE (0..65535))

RSerPoolDescription ::= TEXTUAL-CONVENTION
DISPLAY-HINT "1024t"
STATUS       current
DESCRIPTION  "Description"
SYNTAX       OCTET STRING (SIZE (0..4095))

RSerPoolPoolElementIdentifier ::= TEXTUAL-CONVENTION
DISPLAY-HINT "x"
STATUS       current
DESCRIPTION  "The pool element ID"
SYNTAX       Unsigned32 (1..4294967295)

RSerPoolPolicyIdentifier ::= TEXTUAL-CONVENTION
DISPLAY-HINT "x"
STATUS       current
DESCRIPTION  "The ID of the pool policy"
SYNTAX       Unsigned32 (1..4294967295)

RSerPoolPolicyLoad ::= TEXTUAL-CONVENTION
DISPLAY-HINT "d"
STATUS       current
DESCRIPTION  "The load status of a pool element"
SYNTAX       Unsigned32 (0..4294967295)

RSerPoolPolicyWeight ::= TEXTUAL-CONVENTION
DISPLAY-HINT "d"
STATUS       current
DESCRIPTION  "The weight of a pool element"
SYNTAX       Unsigned32 (0..4294967295)

RSerPoolTransportUseType ::= TEXTUAL-CONVENTION
STATUS       current
DESCRIPTION "The transport use of a pool element"
SYNTAX       INTEGER {
dataOnly(0),
dataPlusControl(1)
}

RSerPoolOpaqueAddress ::= TEXTUAL-CONVENTION
DISPLAY-HINT "1024t"
STATUS       current
DESCRIPTION  "Opaque address"
SYNTAX       OCTET STRING  (SIZE (0..65535))


-- ## Top-level definitions #######################################
rserpoolENRPServers  OBJECT IDENTIFIER ::= { rserpoolMIB 1 }
rserpoolPoolElements OBJECT IDENTIFIER ::= { rserpoolMIB 2 }
rserpoolPoolUsers    OBJECT IDENTIFIER ::= { rserpoolMIB 3 }



-- ################################################################
-- #### ENRP Servers Section                                   ####
-- ################################################################

-- ## Definition of the ENRP server table #########################
rserpoolENRPTable OBJECT-TYPE
SYNTAX     SEQUENCE OF RSerPoolENRPEntry
MAX-ACCESS not-accessible
STATUS     current
DESCRIPTION
"The table listing of ENRP servers."
::= { rserpoolENRPServers 1 }

rserpoolENRPEntry OBJECT-TYPE
SYNTAX     RSerPoolENRPEntry
MAX-ACCESS not-accessible
STATUS     current
DESCRIPTION
"An ENRP server entry in the table listing of ENRP
servers."
INDEX { rserpoolENRPIndex }
::= { rserpoolENRPTable 1 }

RSerPoolENRPEntry ::= SEQUENCE {
rserpoolENRPIndex                Unsigned32,
rserpoolENRPOperationScope       RSerPoolOperationScope,
rserpoolENRPIdentifier           RSerPoolENRPServerIdentifier,
rserpoolENRPDescription          RSerPoolDescription,
rserpoolENRPUptime               TimeTicks,
rserpoolENRPPort                 InetPortNumber,
rserpoolENRPASAPAnnouncePort     InetPortNumber,
rserpoolENRPASAPAnnounceAddrType InetAddressType,
rserpoolENRPASAPAnnounceAddr     InetAddress,
rserpoolENRPENRPAnnouncePort     InetPortNumber,
rserpoolENRPENRPAnnounceAddrType InetAddressType,
rserpoolENRPENRPAnnounceAddr     InetAddress }

rserpoolENRPIndex OBJECT-TYPE
SYNTAX     Unsigned32 (1..4294967295)
MAX-ACCESS not-accessible
STATUS     current
DESCRIPTION
"An integer to uniquely identify an ENRP server."
::= { rserpoolENRPEntry 1 }

rserpoolENRPOperationScope OBJECT-TYPE
SYNTAX     RSerPoolOperationScope
MAX-ACCESS read-only
STATUS     current
DESCRIPTION
"The definition of the operation scope of this ENRP server."
::= { rserpoolENRPEntry 2 }

rserpoolENRPIdentifier OBJECT-TYPE
SYNTAX     RSerPoolENRPServerIdentifier
MAX-ACCESS read-only
STATUS     current
DESCRIPTION
"The ENRP server identifier of this ENRP server."
::= { rserpoolENRPEntry 3 }

rserpoolENRPDescription OBJECT-TYPE
SYNTAX     RSerPoolDescription
MAX-ACCESS read-write
STATUS     current
DESCRIPTION
"A textual description of this ENRP server, e.g. its location
and a contact address of its administrator."
::= { rserpoolENRPEntry 4 }

rserpoolENRPUptime OBJECT-TYPE
SYNTAX     TimeTicks
MAX-ACCESS read-only
STATUS     current
DESCRIPTION
"The ENRP service uptime of this ENRP server."
::= { rserpoolENRPEntry 5 }

rserpoolENRPPort OBJECT-TYPE
SYNTAX     InetPortNumber
MAX-ACCESS read-only
STATUS     current
DESCRIPTION
"The SCTP port number of the ENRP protocol endpoint of
this ENRP server."
::= { rserpoolENRPEntry 6 }

rserpoolENRPASAPAnnouncePort OBJECT-TYPE
SYNTAX     InetPortNumber
MAX-ACCESS read-only
STATUS     current
DESCRIPTION
"The destination UDP port number ASAP multicast announce
messages are sent to."
::= { rserpoolENRPEntry 7 }

rserpoolENRPASAPAnnounceAddrType OBJECT-TYPE
SYNTAX     InetAddressType { ipv4(1), ipv6(2) }
MAX-ACCESS read-only
STATUS     current
DESCRIPTION
"The network-layer protocol ASAP multicast announce messages are sent over."
::= { rserpoolENRPEntry 8 }

rserpoolENRPASAPAnnounceAddr OBJECT-TYPE
SYNTAX     InetAddress (SIZE(4|16))
MAX-ACCESS read-only
STATUS     current
DESCRIPTION
"The destination IP multicast address ASAP multicast
announce messages are sent to. The type of this address is given in
rserpoolENRPASAPAnnounceAddrType."
::= { rserpoolENRPEntry 9 }

rserpoolENRPENRPAnnouncePort OBJECT-TYPE
SYNTAX     InetPortNumber
MAX-ACCESS read-only
STATUS     current
DESCRIPTION
"The destination UDP port number ENRP multicast announce
messages are sent to."
::= { rserpoolENRPEntry 10 }

rserpoolENRPENRPAnnounceAddrType OBJECT-TYPE
SYNTAX     InetAddressType { ipv4(1), ipv6(2) }
MAX-ACCESS read-only
STATUS     current
DESCRIPTION
"The network-layer protocol ENRP multicast announce messages are sent over."
::= { rserpoolENRPEntry 11 }

rserpoolENRPENRPAnnounceAddr OBJECT-TYPE
SYNTAX     InetAddress (SIZE(4|16))
MAX-ACCESS read-only
STATUS     current
DESCRIPTION
"The destination multicast IP address ENRP multicast
announce messages are sent to. The type of this address is given in
rserpoolENRPENRPAnnounceAddrType."
::= { rserpoolENRPEntry 12 }



-- ## Definition of the pool table ################################
rserpoolENRPPoolTable OBJECT-TYPE
SYNTAX     SEQUENCE OF RSerPoolENRPPoolEntry
MAX-ACCESS not-accessible
STATUS     current
DESCRIPTION
"The table listing of pools."
::= { rserpoolENRPServers 3 }

rserpoolENRPPoolEntry OBJECT-TYPE
SYNTAX     RSerPoolENRPPoolEntry
MAX-ACCESS not-accessible
STATUS     current
DESCRIPTION
"The pool entry in the table listing of pools."
INDEX { rserpoolENRPIndex, rserpoolENRPPoolIndex }
::= { rserpoolENRPPoolTable 1 }

RSerPoolENRPPoolEntry ::= SEQUENCE {
rserpoolENRPPoolIndex  Unsigned32,
rserpoolENRPPoolHandle RSerPoolPoolHandle }

rserpoolENRPPoolIndex OBJECT-TYPE
SYNTAX     Unsigned32 (1..4294967295)
MAX-ACCESS not-accessible
STATUS     current
DESCRIPTION
"An integer to uniquely identify a pool."
::= { rserpoolENRPPoolEntry 1 }

rserpoolENRPPoolHandle OBJECT-TYPE
SYNTAX     RSerPoolPoolHandle
MAX-ACCESS read-only
STATUS     current
DESCRIPTION
"The pool handle of this pool."
::= { rserpoolENRPPoolEntry 2 }


-- ## Definition of the pool element table ########################
rserpoolENRPPoolElementTable OBJECT-TYPE
SYNTAX     SEQUENCE OF RSerPoolENRPPoolElementEntry
MAX-ACCESS not-accessible
STATUS     current
DESCRIPTION
"The table listing of pool elements."
::= { rserpoolENRPServers 4 }

rserpoolENRPPoolElementEntry OBJECT-TYPE
SYNTAX     RSerPoolENRPPoolElementEntry
MAX-ACCESS not-accessible
STATUS     current
DESCRIPTION
"A pool element in the table listing of pool elements."
INDEX { rserpoolENRPIndex,
rserpoolENRPPoolIndex,
rserpoolENRPPoolElementIndex }
::= { rserpoolENRPPoolElementTable 1 }

RSerPoolENRPPoolElementEntry ::= SEQUENCE {
rserpoolENRPPoolElementIndex   Unsigned32,
rserpoolENRPPoolElementID      RSerPoolPoolElementIdentifier,
rserpoolENRPASAPTransportPort  InetPortNumber,
rserpoolENRPUserTransportProto Unsigned32,
rserpoolENRPUserTransportPort  InetPortNumber,
rserpoolENRPUserTransportUse   RSerPoolTransportUseType,
rserpoolENRPPolicyID           RSerPoolPolicyIdentifier,
rserpoolENRPPolicyDescription  RSerPoolDescription,
rserpoolENRPPolicyWeight       RSerPoolPolicyWeight,
rserpoolENRPPolicyLoad         RSerPoolPolicyLoad,
rserpoolENRPPolicyLoadDeg      RSerPoolPolicyLoad,
rserpoolENRPRegistrationLife   TimeTicks,
rserpoolENRPHomeENRPServer     RSerPoolENRPServerIdentifier }


rserpoolENRPPoolElementIndex OBJECT-TYPE
SYNTAX     Unsigned32 (1..4294967295)
MAX-ACCESS not-accessible
STATUS     current
DESCRIPTION
"An integer to uniquely identify a pool element. Note,
that uniqueness of a pool element identifier in the pool
is not enforced, therefore this index is required here!"
::={ rserpoolENRPPoolElementEntry 1 }

rserpoolENRPPoolElementID OBJECT-TYPE
SYNTAX     RSerPoolPoolElementIdentifier
MAX-ACCESS read-only
STATUS     current
DESCRIPTION
"The pool element identifier of this pool element."
::={ rserpoolENRPPoolElementEntry 2 }

rserpoolENRPASAPTransportPort OBJECT-TYPE
SYNTAX     InetPortNumber
MAX-ACCESS read-only
STATUS     current
DESCRIPTION
"The SCTP port number of the ASAP endpoint of this pool
element."
::= { rserpoolENRPPoolElementEntry 3 }

rserpoolENRPUserTransportProto OBJECT-TYPE
SYNTAX     Unsigned32 (0..255)
MAX-ACCESS read-only
STATUS     current
DESCRIPTION
"The transport protocol number of the service endpoint
of this pool element."
::= { rserpoolENRPPoolElementEntry 4 }

rserpoolENRPUserTransportPort OBJECT-TYPE
SYNTAX     InetPortNumber
MAX-ACCESS read-only
STATUS     current
DESCRIPTION
"The transport protocol's port number of the service
endpoint of this pool element."
::= { rserpoolENRPPoolElementEntry 5 }

rserpoolENRPUserTransportUse OBJECT-TYPE
SYNTAX     RSerPoolTransportUseType
MAX-ACCESS read-only
STATUS     current
DESCRIPTION
"The transport use of the service endpoint of this pool
element."
::= { rserpoolENRPPoolElementEntry 6 }

rserpoolENRPPolicyID OBJECT-TYPE
SYNTAX     RSerPoolPolicyIdentifier
MAX-ACCESS read-only
STATUS     current
DESCRIPTION
"The pool policy of this pool element."
::= { rserpoolENRPPoolElementEntry 7 }

rserpoolENRPPolicyDescription OBJECT-TYPE
SYNTAX     RSerPoolDescription
MAX-ACCESS read-only
STATUS     current
DESCRIPTION
"The textual description of the pool policy of this pool
element."
::= { rserpoolENRPPoolElementEntry 8 }

rserpoolENRPPolicyWeight OBJECT-TYPE
SYNTAX     RSerPoolPolicyWeight
MAX-ACCESS read-only
STATUS     current
DESCRIPTION
"The pool policy's weight parameter for this pool element."
::= { rserpoolENRPPoolElementEntry 9 }

rserpoolENRPPolicyLoad OBJECT-TYPE
SYNTAX     RSerPoolPolicyLoad
MAX-ACCESS read-only
STATUS     current
DESCRIPTION
"The pool policy's load status for this pool element."
::= { rserpoolENRPPoolElementEntry 10 }

rserpoolENRPPolicyLoadDeg OBJECT-TYPE
SYNTAX     RSerPoolPolicyLoad
MAX-ACCESS read-only
STATUS     current
DESCRIPTION
"The pool policy's load degradation parameter for this pool
element."
::= { rserpoolENRPPoolElementEntry 11 }

rserpoolENRPRegistrationLife OBJECT-TYPE
SYNTAX     TimeTicks
MAX-ACCESS read-only
STATUS     current
DESCRIPTION
"The registration life of this pool element."
::= { rserpoolENRPPoolElementEntry 12 }

rserpoolENRPHomeENRPServer OBJECT-TYPE
SYNTAX     RSerPoolENRPServerIdentifier
MAX-ACCESS read-only
STATUS     current
DESCRIPTION
"The ID of the home ENRP server of this pool element."
::= { rserpoolENRPPoolElementEntry 13 }


-- ## Definition of the ASAP transport address list table #########
rserpoolENRPASAPAddrTable OBJECT-TYPE
SYNTAX     SEQUENCE OF RSerPoolENRPASAPAddrTableEntry
MAX-ACCESS not-accessible
STATUS     current
DESCRIPTION
"A table listing of all IP addresses of the ASAP transport
endpoint."
::= { rserpoolENRPServers 5 }

rserpoolENRPASAPAddrTableEntry  OBJECT-TYPE
SYNTAX     RSerPoolENRPASAPAddrTableEntry
MAX-ACCESS not-accessible
STATUS     current
DESCRIPTION
"An IP address of the ASAP transport endpoint."
INDEX { rserpoolENRPIndex,
rserpoolENRPPoolIndex,
rserpoolENRPPoolElementIndex,
rserpoolENRPASAPAddrTableIndex }
::= { rserpoolENRPASAPAddrTable 1 }

RSerPoolENRPASAPAddrTableEntry ::= SEQUENCE {
rserpoolENRPASAPAddrTableIndex Unsigned32,
rserpoolENRPASAPL3Type         InetAddressType,
rserpoolENRPASAPL3Addr         InetAddress }

rserpoolENRPASAPAddrTableIndex OBJECT-TYPE
SYNTAX     Unsigned32 (1..4294967295)
MAX-ACCESS not-accessible
STATUS     current
DESCRIPTION
"A unique identifier for the IP address of an ASAP transport
endpoint."
::= { rserpoolENRPASAPAddrTableEntry 1 }

rserpoolENRPASAPL3Type OBJECT-TYPE
SYNTAX     InetAddressType { ipv4(1), ipv6(2) }
MAX-ACCESS read-only
STATUS     current
DESCRIPTION
"The network-layer protocol (IPv4 or IPv6) of an IP address of
an ASAP transport endpoint."
::= { rserpoolENRPASAPAddrTableEntry 2 }

rserpoolENRPASAPL3Addr OBJECT-TYPE
SYNTAX     InetAddress (SIZE(4|16))
MAX-ACCESS read-only
STATUS     current
DESCRIPTION
"The IP address of an ASAP transport endpoint. The type of this address is
given in rserpoolENRPASAPL3Type."
::= { rserpoolENRPASAPAddrTableEntry 3 }


-- ## Definition of the user transport address list table #########
rserpoolENRPUserAddrTable OBJECT-TYPE
SYNTAX     SEQUENCE OF RSerPoolENRPUserAddrTableEntry
MAX-ACCESS not-accessible
STATUS     current
DESCRIPTION
"A table listing of all IP addresses of the user
transport endpoint."
::= { rserpoolENRPServers 6 }

rserpoolENRPUserAddrTableEntry  OBJECT-TYPE
SYNTAX     RSerPoolENRPUserAddrTableEntry
MAX-ACCESS not-accessible
STATUS     current
DESCRIPTION
"An IP address of the user transport endpoint."
INDEX { rserpoolENRPIndex,
rserpoolENRPPoolIndex,
rserpoolENRPPoolElementIndex,
rserpoolENRPUserAddrTableIndex }
::= { rserpoolENRPUserAddrTable 1 }

RSerPoolENRPUserAddrTableEntry ::= SEQUENCE {
rserpoolENRPUserAddrTableIndex Unsigned32,
rserpoolENRPUserL3Type         InetAddressType,
rserpoolENRPUserL3Addr         InetAddress,
rserpoolENRPUserL3Opaque       RSerPoolOpaqueAddress }

rserpoolENRPUserAddrTableIndex OBJECT-TYPE
SYNTAX     Unsigned32 (1..4294967295)
MAX-ACCESS not-accessible
STATUS     current
DESCRIPTION
"A unique identifier for the IP address of an user transport
endpoint."
::= { rserpoolENRPUserAddrTableEntry 1 }

rserpoolENRPUserL3Type OBJECT-TYPE
SYNTAX     InetAddressType { ipv4(1), ipv6(2) }
MAX-ACCESS read-only
STATUS     current
DESCRIPTION
"The network-layer protocol (IPv4 or IPv6) of an IP address of
an user transport endpoint."
::= { rserpoolENRPUserAddrTableEntry 2 }

rserpoolENRPUserL3Addr OBJECT-TYPE
SYNTAX     InetAddress (SIZE(4|16))
MAX-ACCESS read-only
STATUS     current
DESCRIPTION
"The IP address of an user transport endpoint. The type of this address
is given in rserpoolENRPUserL3Type."
::= { rserpoolENRPUserAddrTableEntry 3 }

rserpoolENRPUserL3Opaque OBJECT-TYPE
SYNTAX     RSerPoolOpaqueAddress
MAX-ACCESS read-only
STATUS     current
DESCRIPTION
"The opaque address of an user transport endpoint."
::= { rserpoolENRPUserAddrTableEntry 4 }


-- ## Definition of ENRP address list table #######################
rserpoolENRPENRPAddrTable OBJECT-TYPE
SYNTAX     SEQUENCE OF RSerPoolENRPENRPAddrTableEntry
MAX-ACCESS not-accessible
STATUS     current
DESCRIPTION
"A table listing of all IP addresses of the ENRP
transport endpoint."
::= { rserpoolENRPServers 7 }

rserpoolENRPENRPAddrTableEntry  OBJECT-TYPE
SYNTAX     RSerPoolENRPENRPAddrTableEntry
MAX-ACCESS not-accessible
STATUS     current
DESCRIPTION
"An IP address of the ENRP transport endpoint."
INDEX { rserpoolENRPIndex,
rserpoolENRPENRPAddrTableIndex }
::= { rserpoolENRPENRPAddrTable 1 }

RSerPoolENRPENRPAddrTableEntry ::= SEQUENCE {
rserpoolENRPENRPAddrTableIndex Unsigned32,
rserpoolENRPENRPL3Type         InetAddressType,
rserpoolENRPENRPL3Addr         InetAddress }

rserpoolENRPENRPAddrTableIndex OBJECT-TYPE
SYNTAX     Unsigned32 (1..4294967295)
MAX-ACCESS not-accessible
STATUS     current
DESCRIPTION
"A unique identifier for the IP address of an ENRP transport
endpoint."
::= { rserpoolENRPENRPAddrTableEntry 1 }

rserpoolENRPENRPL3Type OBJECT-TYPE
SYNTAX     InetAddressType { ipv4(1), ipv6(2) }
MAX-ACCESS read-only
STATUS     current
DESCRIPTION
"The network-layer protocol (IPv4 or IPv6) of an IP address of
an ENRP transport endpoint."
::= { rserpoolENRPENRPAddrTableEntry 2 }

rserpoolENRPENRPL3Addr OBJECT-TYPE
SYNTAX     InetAddress (SIZE(4|16))
MAX-ACCESS read-only
STATUS     current
DESCRIPTION
"The IP address of an ENRP transport endpoint. The type of this address is
given in rserpoolENRPENRPL3Type."
::= { rserpoolENRPENRPAddrTableEntry 3 }


-- ## Definition of peer table ####################################
rserpoolENRPPeerTable OBJECT-TYPE
SYNTAX     SEQUENCE OF RSerPoolENRPPeerEntry
MAX-ACCESS not-accessible
STATUS     current
DESCRIPTION
"The table listing of a peer table."
::= { rserpoolENRPServers 8 }

rserpoolENRPPeerEntry OBJECT-TYPE
SYNTAX     RSerPoolENRPPeerEntry
MAX-ACCESS not-accessible
STATUS     current
DESCRIPTION
"A peer entry in the table listing of a peer table."
INDEX { rserpoolENRPPeerIndex }
::= { rserpoolENRPPeerTable 1 }

RSerPoolENRPPeerEntry ::= SEQUENCE {
rserpoolENRPPeerIndex      Unsigned32,
rserpoolENRPPeerIdentifier Unsigned32,
rserpoolENRPPeerPort       InetPortNumber,
rserpoolENRPPeerLastHeard  TimeTicks }

rserpoolENRPPeerIndex OBJECT-TYPE
SYNTAX     Unsigned32 (1..4294967295)
MAX-ACCESS not-accessible
STATUS     current
DESCRIPTION
"A unique identifier for a peer entry in the table listing
of a peer table."
::= { rserpoolENRPPeerEntry 1 }

rserpoolENRPPeerIdentifier OBJECT-TYPE
SYNTAX     Unsigned32
MAX-ACCESS read-only
STATUS     current
DESCRIPTION
"The ENRP identifier of this peer."
::= { rserpoolENRPPeerEntry 2 }

rserpoolENRPPeerPort OBJECT-TYPE
SYNTAX     InetPortNumber
MAX-ACCESS read-only
STATUS     current
DESCRIPTION
"The SCTP port number of the ENRP transport endpoint of this peer."
::= { rserpoolENRPPeerEntry 3 }

rserpoolENRPPeerLastHeard OBJECT-TYPE
SYNTAX     TimeTicks
MAX-ACCESS read-only
STATUS     current
DESCRIPTION
"The time since the reception of the last ENRP Peer Presence
message of this peer."
::= { rserpoolENRPPeerEntry 4 }


-- ## Definition of peer address list table #######################
rserpoolENRPPeerAddrTable OBJECT-TYPE
SYNTAX     SEQUENCE OF RSerPoolENRPPeerAddrTableEntry
MAX-ACCESS not-accessible
STATUS     current
DESCRIPTION
"A table listing of the peer endpoint addresses."
::= { rserpoolENRPServers 9 }

rserpoolENRPPeerAddrTableEntry  OBJECT-TYPE
SYNTAX     RSerPoolENRPPeerAddrTableEntry
MAX-ACCESS not-accessible
STATUS     current
DESCRIPTION
"A table listing of all IP addresses of the ENRP
transport endpoint of a peer referenced by peerIndex."
INDEX { rserpoolENRPPeerIndex,
rserpoolENRPPeerAddrTableIndex }
::= { rserpoolENRPPeerAddrTable 1 }

RSerPoolENRPPeerAddrTableEntry ::= SEQUENCE {
rserpoolENRPPeerAddrTableIndex Unsigned32,
rserpoolENRPPeerL3Type         InetAddressType,
rserpoolENRPPeerL3Addr         InetAddress }

rserpoolENRPPeerAddrTableIndex OBJECT-TYPE
SYNTAX     Unsigned32 (1..4294967295)
MAX-ACCESS not-accessible
STATUS     current
DESCRIPTION
"A unique identifier for the IP address of a peer ENRP
transport endpoint."
::= { rserpoolENRPPeerAddrTableEntry 1 }

rserpoolENRPPeerL3Type OBJECT-TYPE
SYNTAX     InetAddressType { ipv4(1), ipv6(2) }
MAX-ACCESS read-only
STATUS     current
DESCRIPTION
"The network-layer protocol (IPv4 or IPv6) of an IP address of
a peer ENRP transport endpoint."
::= { rserpoolENRPPeerAddrTableEntry 2 }

rserpoolENRPPeerL3Addr OBJECT-TYPE
SYNTAX     InetAddress (SIZE(4|16))
MAX-ACCESS read-only
STATUS     current
DESCRIPTION
"The IP address of a peer ENRP transport endpoint. The type of this
address is given in rserpoolENRPPeerL3Type."
::= { rserpoolENRPPeerAddrTableEntry 3 }



-- ################################################################
-- #### Pool Elements Section                                  ####
-- ################################################################

-- ## Definition of the pool element table ########################
rserpoolPETable OBJECT-TYPE
SYNTAX     SEQUENCE OF RSerPoolPoolElementEntry
MAX-ACCESS not-accessible
STATUS     current
DESCRIPTION
"The table listing of pool elements."
::= { rserpoolPoolElements 1 }

rserpoolPEEntry OBJECT-TYPE
SYNTAX     RSerPoolPoolElementEntry
MAX-ACCESS not-accessible
STATUS     current
DESCRIPTION
"A pool element in the table listing of pool elements."
INDEX { rserpoolPEIndex }
::= { rserpoolPETable 1 }

RSerPoolPoolElementEntry ::= SEQUENCE {
rserpoolPEIndex              Unsigned32,
rserpoolPEOperationScope     RSerPoolOperationScope,
rserpoolPEPoolHandle         RSerPoolPoolHandle,
rserpoolPEIdentifier         RSerPoolPoolElementIdentifier,
rserpoolPEDescription        RSerPoolDescription,
rserpoolPEUptime             TimeTicks,
rserpoolPEASAPTransportPort  InetPortNumber,
rserpoolPEUserTransportProto Unsigned32,
rserpoolPEUserTransportPort  InetPortNumber,
rserpoolPEUserTransportUse   RSerPoolTransportUseType,
rserpoolPEPolicyID           RSerPoolPolicyIdentifier,
rserpoolPEPolicyDescription  RSerPoolDescription,
rserpoolPEPolicyWeight       RSerPoolPolicyWeight,
rserpoolPEPolicyLoad         RSerPoolPolicyLoad,
rserpoolPEPolicyLoadDeg      RSerPoolPolicyLoad,
rserpoolPERegistrationLife   TimeTicks,
rserpoolPEHomeENRPServer     RSerPoolENRPServerIdentifier }


rserpoolPEIndex OBJECT-TYPE
SYNTAX     Unsigned32 (1..4294967295)
MAX-ACCESS not-accessible
STATUS     current
DESCRIPTION
"An integer to uniquely identify a pool element. Note,
that uniqueness of a pool element identifier in the pool
is not enforced, therefore this index is required here!"
::={ rserpoolPEEntry 1 }

rserpoolPEOperationScope OBJECT-TYPE
SYNTAX     RSerPoolOperationScope
MAX-ACCESS read-only
STATUS     current
DESCRIPTION
"The operation scope of this pool element."
::= { rserpoolPEEntry 2 }

rserpoolPEPoolHandle OBJECT-TYPE
SYNTAX     RSerPoolPoolHandle
MAX-ACCESS read-write
STATUS     current
DESCRIPTION
"The pool handle of this pool element. Changing this object will update the
pool element's pool handle and result in a re-registration."
::={ rserpoolPEEntry 3 }

rserpoolPEIdentifier OBJECT-TYPE
SYNTAX     RSerPoolPoolElementIdentifier
MAX-ACCESS read-only
STATUS     current
DESCRIPTION
"The pool element identifier of this pool element."
::={ rserpoolPEEntry 4 }

rserpoolPEDescription OBJECT-TYPE
SYNTAX     RSerPoolDescription
MAX-ACCESS read-write
STATUS     current
DESCRIPTION
"A textual description of this pool element, e.g. its location
and a contact address of its administrator."
::= { rserpoolPEEntry 5 }

rserpoolPEUptime OBJECT-TYPE
SYNTAX     TimeTicks
MAX-ACCESS read-only
STATUS     current
DESCRIPTION
"The ENRP service uptime of this pool element."
::= { rserpoolPEEntry 6 }

rserpoolPEASAPTransportPort OBJECT-TYPE
SYNTAX     InetPortNumber
MAX-ACCESS read-only
STATUS     current
DESCRIPTION
"The SCTP port number of the ASAP endpoint of this pool element."
::= { rserpoolPEEntry 7 }

rserpoolPEUserTransportProto OBJECT-TYPE
SYNTAX     Unsigned32 (0..255)
MAX-ACCESS read-only
STATUS     current
DESCRIPTION
"The transport protocol number of the service endpoint
of this pool element."
::= { rserpoolPEEntry 8 }

rserpoolPEUserTransportPort OBJECT-TYPE
SYNTAX     InetPortNumber
MAX-ACCESS read-only
STATUS     current
DESCRIPTION
"The transport protocol's port number of the service
endpoint of this pool element."
::= { rserpoolPEEntry 9 }

rserpoolPEUserTransportUse OBJECT-TYPE
SYNTAX     RSerPoolTransportUseType
MAX-ACCESS read-only
STATUS     current
DESCRIPTION
"The transport use of the service endpoint of this pool element."
::= { rserpoolPEEntry 10 }

rserpoolPEPolicyID OBJECT-TYPE
SYNTAX     RSerPoolPolicyIdentifier
MAX-ACCESS read-write
STATUS     current
DESCRIPTION
"The pool policy of this pool element. Changing this object will update the
pool element's policy and result in a re-registration."
::= { rserpoolPEEntry 11 }

rserpoolPEPolicyDescription OBJECT-TYPE
SYNTAX     RSerPoolDescription
MAX-ACCESS read-write
STATUS     current
DESCRIPTION
"The textual description of the pool policy of this pool element."
::= { rserpoolPEEntry 12 }

rserpoolPEPolicyWeight OBJECT-TYPE
SYNTAX     RSerPoolPolicyWeight
MAX-ACCESS read-write
STATUS     current
DESCRIPTION
"The pool policy's weight parameter for this pool element. Changing this
object will update the pool element's policy weight setting and result in
a re-registration."
::= { rserpoolPEEntry 13 }

rserpoolPEPolicyLoad OBJECT-TYPE
SYNTAX     RSerPoolPolicyLoad
MAX-ACCESS read-only
STATUS     current
DESCRIPTION
"The pool policy's load status for this pool element."
::= { rserpoolPEEntry 14 }

rserpoolPEPolicyLoadDeg OBJECT-TYPE
SYNTAX     RSerPoolPolicyLoad
MAX-ACCESS read-write
STATUS     current
DESCRIPTION
"The pool policy's load degradation parameter for this pool element.
Changing this object will update the pool element's load degradation
setting and result in a re-registration."
::= { rserpoolPEEntry 15 }

rserpoolPERegistrationLife OBJECT-TYPE
SYNTAX     TimeTicks
MAX-ACCESS read-write
STATUS     current
DESCRIPTION
"The registration life of this pool element. Changing this object will
update the pool element's lifetime setting and result in a re-registration."
::= { rserpoolPEEntry 16 }

rserpoolPEHomeENRPServer OBJECT-TYPE
SYNTAX     RSerPoolENRPServerIdentifier
MAX-ACCESS read-only
STATUS     current
DESCRIPTION
"The ID of the home ENRP server of this pool element."
::= { rserpoolPEEntry 17 }


-- ## Definition of the ASAP transport address list table #########
rserpoolPEASAPAddrTable OBJECT-TYPE
SYNTAX     SEQUENCE OF RSerPoolPEASAPAddrTableEntry
MAX-ACCESS not-accessible
STATUS     current
DESCRIPTION
"A table listing of all IP addresses of the ASAP transport
endpoint."
::= { rserpoolPoolElements 2 }

rserpoolPEASAPAddrTableEntry  OBJECT-TYPE
SYNTAX     RSerPoolPEASAPAddrTableEntry
MAX-ACCESS not-accessible
STATUS     current
DESCRIPTION
"An IP address of the ASAP transport endpoint."
INDEX { rserpoolPEIndex,
rserpoolPEASAPAddrTableIndex }
::= { rserpoolPEASAPAddrTable 1 }

RSerPoolPEASAPAddrTableEntry ::= SEQUENCE {
rserpoolPEASAPAddrTableIndex Unsigned32,
rserpoolPEASAPL3Type         InetAddressType,
rserpoolPEASAPL3Addr         InetAddress }

rserpoolPEASAPAddrTableIndex OBJECT-TYPE
SYNTAX     Unsigned32 (1..4294967295)
MAX-ACCESS not-accessible
STATUS     current
DESCRIPTION
"A unique identifier for the IP address of an ASAP transport
endpoint."
::= { rserpoolPEASAPAddrTableEntry 1 }

rserpoolPEASAPL3Type OBJECT-TYPE
SYNTAX     InetAddressType { ipv4(1), ipv6(2) }
MAX-ACCESS read-only
STATUS     current
DESCRIPTION
"The network-layer protocol (IPv4 or IPv6) of an IP address of
an ASAP transport endpoint."
::= { rserpoolPEASAPAddrTableEntry 2 }

rserpoolPEASAPL3Addr OBJECT-TYPE
SYNTAX     InetAddress (SIZE(4|16))
MAX-ACCESS read-only
STATUS     current
DESCRIPTION
"The IP address of an ASAP transport endpoint. The type of this address
is given in rserpoolPEASAPL3Type."
::= { rserpoolPEASAPAddrTableEntry 3 }


-- ## Definition of the user transport address list table #########
rserpoolPEUserAddrTable OBJECT-TYPE
SYNTAX     SEQUENCE OF RSerPoolPEUserAddrTableEntry
MAX-ACCESS not-accessible
STATUS     current
DESCRIPTION
"A table listing of all IP addresses of the user
transport endpoint."
::= { rserpoolPoolElements 6 }

rserpoolPEUserAddrTableEntry  OBJECT-TYPE
SYNTAX     RSerPoolPEUserAddrTableEntry
MAX-ACCESS not-accessible
STATUS     current
DESCRIPTION
"An IP address of the user transport endpoint."
INDEX { rserpoolPEIndex,
rserpoolPEUserAddrTableIndex }
::= { rserpoolPEUserAddrTable 1 }

RSerPoolPEUserAddrTableEntry ::= SEQUENCE {
rserpoolPEUserAddrTableIndex Unsigned32,
rserpoolPEUserL3Type         InetAddressType,
rserpoolPEUserL3Addr         InetAddress,
rserpoolPEUserL3Opaque       RSerPoolOpaqueAddress }

rserpoolPEUserAddrTableIndex OBJECT-TYPE
SYNTAX     Unsigned32 (1..4294967295)
MAX-ACCESS not-accessible
STATUS     current
DESCRIPTION
"A unique identifier for the IP address of an user transport
endpoint."
::= { rserpoolPEUserAddrTableEntry 1 }

rserpoolPEUserL3Type OBJECT-TYPE
SYNTAX     InetAddressType { ipv4(1), ipv6(2) }
MAX-ACCESS read-only
STATUS     current
DESCRIPTION
"The network-layer protocol of an IP address of
an user transport endpoint. Set to unknown for opaque address."
::= { rserpoolPEUserAddrTableEntry 2 }

rserpoolPEUserL3Addr OBJECT-TYPE
SYNTAX     InetAddress (SIZE(4|16))
MAX-ACCESS read-only
STATUS     current
DESCRIPTION
"The IP address of an user transport endpoint. The type of this address is
given in rserpoolPEUserL3Addr."
::= { rserpoolPEUserAddrTableEntry 3 }

rserpoolPEUserL3Opaque OBJECT-TYPE
SYNTAX     RSerPoolOpaqueAddress
MAX-ACCESS read-only
STATUS     current
DESCRIPTION
"The opaque address of an user transport endpoint."
::= { rserpoolPEUserAddrTableEntry 4 }



-- ################################################################
-- #### Pool Users Section                                     ####
-- ################################################################

-- ## Definition of the pool user table ###########################
rserpoolPUTable OBJECT-TYPE
SYNTAX     SEQUENCE OF RSerPoolPoolUserEntry
MAX-ACCESS not-accessible
STATUS     current
DESCRIPTION
"The table listing of pool users."
::= { rserpoolPoolUsers 1 }

rserpoolPUEntry OBJECT-TYPE
SYNTAX     RSerPoolPoolUserEntry
MAX-ACCESS not-accessible
STATUS     current
DESCRIPTION
"A pool user in the table listing of pool users."
INDEX { rserpoolPUIndex }
::= { rserpoolPUTable 1 }

RSerPoolPoolUserEntry ::= SEQUENCE {
rserpoolPUIndex          Unsigned32,
rserpoolPUOperationScope RSerPoolOperationScope,
rserpoolPUPoolHandle     RSerPoolPoolHandle,
rserpoolPUDescription    RSerPoolDescription,
rserpoolPUUptime         TimeTicks }

rserpoolPUIndex OBJECT-TYPE
SYNTAX     Unsigned32 (1..4294967295)
MAX-ACCESS not-accessible
STATUS     current
DESCRIPTION
"An integer to uniquely identify a pool user."
::={ rserpoolPUEntry 1 }

rserpoolPUOperationScope OBJECT-TYPE
SYNTAX     RSerPoolOperationScope
MAX-ACCESS read-only
STATUS     current
DESCRIPTION
"The operation scope of this pool user."
::= { rserpoolPUEntry 2 }

rserpoolPUPoolHandle OBJECT-TYPE
SYNTAX     RSerPoolPoolHandle
MAX-ACCESS read-write
STATUS     current
DESCRIPTION
"The pool handle of this pool user. Changing this object will update the
pool user's pool handle for all future sessions."
::={ rserpoolPUEntry 3 }

rserpoolPUDescription OBJECT-TYPE
SYNTAX     RSerPoolDescription
MAX-ACCESS read-write
STATUS     current
DESCRIPTION
"A textual description of this pool user, e.g. its location
and a contact address of its administrator."
::= { rserpoolPUEntry 4 }

rserpoolPUUptime OBJECT-TYPE
SYNTAX     TimeTicks
MAX-ACCESS read-only
STATUS     current
DESCRIPTION
"The ENRP service uptime of this pool user."
::= { rserpoolPUEntry 5 }



-- ## MIB conformance and compliance ##############################
rserpoolMIBConformance OBJECT IDENTIFIER ::= { rserpoolMIB 4 }

rserpoolMIBCompliances OBJECT IDENTIFIER ::= {
rserpoolMIBConformance 1
}
rserpoolMIBGroups      OBJECT IDENTIFIER ::= {
rserpoolMIBConformance 2
}


rserpoolMIBCompliance MODULE-COMPLIANCE
STATUS  current
DESCRIPTION
"The compliance statement for SNMP entities which implement RSerPool."
MODULE  -- this module
MANDATORY-GROUPS { rserpoolENRPGroup,
rserpoolPEGroup,
rserpoolPUGroup }
::= { rserpoolMIBCompliances 1 }

rserpoolENRPGroup OBJECT-GROUP
OBJECTS { rserpoolENRPOperationScope,
rserpoolENRPIdentifier,
rserpoolENRPDescription,
rserpoolENRPUptime,
rserpoolENRPPort,
rserpoolENRPASAPAnnouncePort,
rserpoolENRPASAPAnnounceAddr,
rserpoolENRPASAPAnnounceAddrType,
rserpoolENRPENRPAnnounceAddrType,
rserpoolENRPENRPAnnouncePort,
rserpoolENRPENRPAnnounceAddr,

rserpoolENRPPoolHandle,
rserpoolENRPPoolElementID,

rserpoolENRPASAPTransportPort,
rserpoolENRPUserTransportProto,
rserpoolENRPUserTransportUse,
rserpoolENRPUserTransportPort,
rserpoolENRPPolicyID,
rserpoolENRPPolicyDescription,
rserpoolENRPPolicyWeight,
rserpoolENRPPolicyLoad,
rserpoolENRPPolicyLoadDeg,
rserpoolENRPRegistrationLife,
rserpoolENRPHomeENRPServer,

rserpoolENRPASAPL3Type,
rserpoolENRPASAPL3Addr,

rserpoolENRPUserL3Type,
rserpoolENRPUserL3Addr,
rserpoolENRPUserL3Opaque,

rserpoolENRPENRPL3Type,
rserpoolENRPENRPL3Addr,

rserpoolENRPPeerIdentifier,
rserpoolENRPPeerPort,
rserpoolENRPPeerLastHeard,
rserpoolENRPPeerL3Type,
rserpoolENRPPeerL3Addr }
STATUS current
DESCRIPTION "The group contains all ENRP server instances running on the system"
::= { rserpoolMIBGroups 1 }

rserpoolPEGroup OBJECT-GROUP
OBJECTS { rserpoolPEOperationScope,
rserpoolPEPoolHandle,
rserpoolPEIdentifier,
rserpoolPEDescription,
rserpoolPEUptime,
rserpoolPEASAPTransportPort,
rserpoolPEUserTransportProto,
rserpoolPEUserTransportPort,
rserpoolPEUserTransportUse,
rserpoolPEPolicyID,
rserpoolPEPolicyDescription,
rserpoolPEPolicyWeight,
rserpoolPEPolicyLoad,
rserpoolPEPolicyLoadDeg,
rserpoolPERegistrationLife,
rserpoolPEHomeENRPServer,

rserpoolPEASAPL3Type,
rserpoolPEASAPL3Addr,

rserpoolPEUserL3Type,
rserpoolPEUserL3Addr,
rserpoolPEUserL3Opaque }
STATUS current
DESCRIPTION "The group contains all pool element instances running on the system"
::= { rserpoolMIBGroups 2 }

rserpoolPUGroup OBJECT-GROUP
OBJECTS { rserpoolPUOperationScope,
rserpoolPUPoolHandle,
rserpoolPUDescription,
rserpoolPUUptime }
STATUS current
DESCRIPTION "The group contains all pool user instances running on the system"
::= { rserpoolMIBGroups 3 }


END