Re: WGLC for BFD Multipoint documents (last round)

Greg Mirsky <gregimirsky@gmail.com> Tue, 16 January 2018 22:51 UTC

Return-Path: <gregimirsky@gmail.com>
X-Original-To: rtg-bfd@ietfa.amsl.com
Delivered-To: rtg-bfd@ietfa.amsl.com
Received: from localhost (localhost [127.0.0.1]) by ietfa.amsl.com (Postfix) with ESMTP id 294B912D893 for <rtg-bfd@ietfa.amsl.com>; Tue, 16 Jan 2018 14:51:51 -0800 (PST)
X-Virus-Scanned: amavisd-new at amsl.com
X-Spam-Flag: NO
X-Spam-Score: -2.699
X-Spam-Level:
X-Spam-Status: No, score=-2.699 tagged_above=-999 required=5 tests=[BAYES_00=-1.9, DKIM_SIGNED=0.1, DKIM_VALID=-0.1, DKIM_VALID_AU=-0.1, FREEMAIL_FROM=0.001, HTML_MESSAGE=0.001, RCVD_IN_DNSWL_LOW=-0.7, SPF_PASS=-0.001] autolearn=ham autolearn_force=no
Authentication-Results: ietfa.amsl.com (amavisd-new); dkim=pass (2048-bit key) header.d=gmail.com
Received: from mail.ietf.org ([4.31.198.44]) by localhost (ietfa.amsl.com [127.0.0.1]) (amavisd-new, port 10024) with ESMTP id a3RPA1Hg0IPE for <rtg-bfd@ietfa.amsl.com>; Tue, 16 Jan 2018 14:51:48 -0800 (PST)
Received: from mail-lf0-x22d.google.com (mail-lf0-x22d.google.com [IPv6:2a00:1450:4010:c07::22d]) (using TLSv1.2 with cipher ECDHE-RSA-AES128-GCM-SHA256 (128/128 bits)) (No client certificate requested) by ietfa.amsl.com (Postfix) with ESMTPS id BC33412D889 for <rtg-bfd@ietf.org>; Tue, 16 Jan 2018 14:51:47 -0800 (PST)
Received: by mail-lf0-x22d.google.com with SMTP id w23so19428819lfd.11 for <rtg-bfd@ietf.org>; Tue, 16 Jan 2018 14:51:47 -0800 (PST)
DKIM-Signature: v=1; a=rsa-sha256; c=relaxed/relaxed; d=gmail.com; s=20161025; h=mime-version:in-reply-to:references:from:date:message-id:subject:to :cc; bh=+v/8I1D5IxaIkcwYMapurLA4XDnsV+7azOHT953lz6w=; b=WggxvgnjHDjtBKVS/WaJmHrZBySAEbPW84PEUpaDQH5wXmrrmg0eu8uFvM5WlyCJS6 xTou1Pi14AGjo/3AdJi9BWsFNtPks7hfX52Ggt61sL2J/PDNRs+a9qlcyx64c8HNYdNv /GAk4VQEzBWu8TWi2RvUCIpqYwmG7ldntGX+ErfaA+CGL4SRvNgkSWgzjnbZKXuYPl/N /TUho5rP4OcftgX5tDEMTv7opWvvXPpT2UAHuGMjO8rMJ2dVEpwr119wTQ0VHD0sJdOw J++/Z7CRenT2ugVsKIlbHsZn9PBefbQjnYfzNfJPpDI6bHWbg4/v+TaL5+JTTQisoTRW gP1Q==
X-Google-DKIM-Signature: v=1; a=rsa-sha256; c=relaxed/relaxed; d=1e100.net; s=20161025; h=x-gm-message-state:mime-version:in-reply-to:references:from:date :message-id:subject:to:cc; bh=+v/8I1D5IxaIkcwYMapurLA4XDnsV+7azOHT953lz6w=; b=lGGDGkeC+0z8iXJ4Jj+MEkK1pCB79j0mjVJG2mGjkAGq1N1sz+SRCTyXuW+8rmn7xm j04yZRy20vq34gJEZBsp1wrTgcd7lOUlDmPizPWYF9tpYVoHgfTOrHB7ztoekMmqgbQu fBfys2JkVDVDGtP1Yw8ExEc8V3c2iXtI261lNoAYlIExVKklvwYtBTECok7piAZZKDmr 8cBFiZA3hPraQI7PQKNvTGvIxGmFp9wKmMR3TQxTEDuaKVbt+TWt3Wl13QWabZDsFkh2 lAFUvN6goNlrMQ3xmjrXi1uxVrtnUuq1trxclooVanVtumubITZ3ymCRnpH+kyZFddz/ nkvA==
X-Gm-Message-State: AKGB3mL1mABxnwUDmTijILqa3gpuzv+oZ7OjRpXdr6YBtIPVtB1cciP7 NZnIrbPYBAgtApwUgMyHE/H0Buy/ja12c38Pd5I=
X-Google-Smtp-Source: ACJfBovteWzCmhOAn0Lf2fuQ1XpDkhq4G9EYMUlwj1f2H8RiZa1nFXaBsdePJJUOfzPHtcCqGNZgPqqq+V0vnsXRJpE=
X-Received: by 10.46.44.15 with SMTP id s15mr22208361ljs.51.1516143105839; Tue, 16 Jan 2018 14:51:45 -0800 (PST)
MIME-Version: 1.0
Received: by 10.46.32.136 with HTTP; Tue, 16 Jan 2018 14:51:44 -0800 (PST)
In-Reply-To: <E14FF8C0-082B-4D52-89F6-0CBAF9CD4181@cisco.com>
References: <20171213172443.GC8708@pfrc.org> <CA+RyBmX6PHczvwEzc4UNqBioK8qv=wTfyeHg9j04EJNe1Uv0wA@mail.gmail.com> <746F74E2-7DFC-41A7-879F-4054CF95475C@cisco.com> <CA+RyBmWqGPTkBek+a0N+BaFr9QZ+xEKvWT5oRxPBuhFsQcizcw@mail.gmail.com> <38B53F72-66B9-4E8F-8BCE-C28A2C283D38@cisco.com> <20171219160537.GH8708@pfrc.org> <CA+RyBmWQTH9N9cCOHJ_9BgvfDGLGFgrsKrMj8mmqGm-V=5KLSw@mail.gmail.com> <20171220171322.GE8708@pfrc.org> <7C073038-8E7D-4735-82A4-97592AA9B34B@cisco.com> <CA+RyBmXanVpKKmyXP9+yuh4z2H4qAeN4jH2xEMx7ddiSHViV3g@mail.gmail.com> <DB3B0F10-4BD8-4096-8875-2E476064E77A@cisco.com> <491F0297-F2AB-4377-A013-1050FDBBB709@cisco.com> <CA+RyBmVXO0o09k-DYY69E2sKdKiU5YBf-h=PnBgerx+HF=ryfg@mail.gmail.com> <44B4B608-7A2B-4E95-A5F7-116896C57028@cisco.com> <0714A770-BF3F-4EF8-A302-A478439A5B13@cisco.com> <5F69E3D1-19E1-45F7-926D-61449E1F09B2@cisco.com> <CA+RyBmWMwom+2=jWHfvSr9AG=WPCnhYJ6uC9HVonVFh9McaysQ@mail.gmail.com> <E14FF8C0-082B-4D52-89F6-0CBAF9CD4181@cisco.com>
From: Greg Mirsky <gregimirsky@gmail.com>
Date: Tue, 16 Jan 2018 14:51:44 -0800
Message-ID: <CA+RyBmUOpBgVho0SPsp9FB=ymFV29q_2EY2k8uOf-O4gfpTmyw@mail.gmail.com>
Subject: Re: WGLC for BFD Multipoint documents (last round)
To: "Reshad Rahman (rrahman)" <rrahman@cisco.com>
Cc: "Carlos Pignataro (cpignata)" <cpignata@cisco.com>, Jeff Haas <jhaas@pfrc.org>, "rtg-bfd@ietf.org" <rtg-bfd@ietf.org>
Content-Type: multipart/alternative; boundary="f4f5e8094f544098dc0562ec935d"
Archived-At: <https://mailarchive.ietf.org/arch/msg/rtg-bfd/Hn0YWJMi7ViBQqaD8ad8CYuWho4>
X-BeenThere: rtg-bfd@ietf.org
X-Mailman-Version: 2.1.22
Precedence: list
List-Id: "RTG Area: Bidirectional Forwarding Detection DT" <rtg-bfd.ietf.org>
List-Unsubscribe: <https://www.ietf.org/mailman/options/rtg-bfd>, <mailto:rtg-bfd-request@ietf.org?subject=unsubscribe>
List-Archive: <https://mailarchive.ietf.org/arch/browse/rtg-bfd/>
List-Post: <mailto:rtg-bfd@ietf.org>
List-Help: <mailto:rtg-bfd-request@ietf.org?subject=help>
List-Subscribe: <https://www.ietf.org/mailman/listinfo/rtg-bfd>, <mailto:rtg-bfd-request@ietf.org?subject=subscribe>
X-List-Received-Date: Tue, 16 Jan 2018 22:51:51 -0000

Hi Reshad,
thank you. I'll add it into the working version to others updates. I
believe changes to active tails be more extensive as now it must introduce
the bfd.SilentTail variable, not just its new state. Will work on that now.

Regards,
Greg

On Tue, Jan 16, 2018 at 1:58 PM, Reshad Rahman (rrahman) <rrahman@cisco.com>;
wrote:

> Hi Greg,
>
>
>
> I am fine with the change below.
>
>
>
> Regards,
>
> Reshad.
>
>
>
> *From: *Greg Mirsky <gregimirsky@gmail.com>;
> *Date: *Tuesday, January 16, 2018 at 2:20 PM
> *To: *"Reshad Rahman (rrahman)" <rrahman@cisco.com>;
> *Cc: *"Carlos Pignataro (cpignata)" <cpignata@cisco.com>;, Jeffrey Haas <
> jhaas@pfrc.org>;, "rtg-bfd@ietf.org"; <rtg-bfd@ietf.org>;
>
> *Subject: *Re: WGLC for BFD Multipoint documents (last round)
>
>
>
> Hi Reshad,
>
> I think this is very good idea. Then in section 4.13.3 Transmitting BFD
> Packets of BFD for Multipoint Networks should be edited. Perhaps the
> following be acceptable:
>
> OLD TEXT
>
>    A system MUST NOT transmit any BFD Control packets if bfd.SilentTail
>
>    is 1.
>
> NEW TEXT
>
>    A system MUST NOT transmit any BFD Control packets if bfd.SessionType is
>
>    MultipointTail.
>
> Will look into related changes in active tails if others agree with the proposal in general.
>
>
>
> Regards,
>
> Greg
>
>
>
>
>
> On Tue, Jan 16, 2018 at 10:53 AM, Reshad Rahman (rrahman) <
> rrahman@cisco.com>; wrote:
>
> Regarding bfd.SilentTail, I am wondering if instead it should be removed
> from MP draft  (always 1 in there) and kept as new state variable in
> active-tail?
>
>
>
> Regards,
>
> Reshad.
>
>
>
> *From: *"Reshad Rahman (rrahman)" <rrahman@cisco.com>;
> *Date: *Tuesday, January 16, 2018 at 9:32 AM
> *To: *"Carlos Pignataro (cpignata)" <cpignata@cisco.com>;, Greg Mirsky <
> gregimirsky@gmail.com>;
> *Cc: *Jeffrey Haas <jhaas@pfrc.org>;, "rtg-bfd@ietf.org"; <rtg-bfd@ietf.org>;
>
>
> *Subject: *Re: WGLC for BFD Multipoint documents (last round)
>
>
>
> Hi Greg,
>
>
>
> The changes for bfd.SessionType (in both drafts) look good.
>
>
>
> bfd.SilentTail is fine in multipoint but in active-tail it is in the New
> State Variables section.  It should be in 3.3.2 instead and there should be
> a reference to the multipoint draft.
>
>
>
> Also, I am in the process of doing the shepherd write-up. So you don’t
> have to push these changes immediately, you can wait for the review, up to
> you.
>
>
>
> Regards,
>
> Reshad.
>
>
>
> *From: *"Carlos Pignataro (cpignata)" <cpignata@cisco.com>;
> *Date: *Tuesday, January 16, 2018 at 1:47 AM
> *To: *Greg Mirsky <gregimirsky@gmail.com>;
> *Cc: *"Reshad Rahman (rrahman)" <rrahman@cisco.com>;, Jeffrey Haas <
> jhaas@pfrc.org>;, "rtg-bfd@ietf.org"; <rtg-bfd@ietf.org>;
> *Subject: *Re: WGLC for BFD Multipoint documents (last round)
>
>
>
> Looks good to me, Greg. Thanks.
>
> Thumb typed by Carlos Pignataro.
>
> Excuze typofraphicak errows
>
>
> On Jan 16, 2018, at 15:32, Greg Mirsky <gregimirsky@gmail.com>; wrote:
>
> Hi Reshad and Carlos,
>
> thank you for your suggestions. Please check the diffs with proposed
> changes to BFD Multipoint and BFD Multipoint with active tails drafts
> (attached).
>
>
>
> Regards,
>
> Greg
>
>
>
> On Mon, Jan 15, 2018 at 8:25 PM, Carlos Pignataro (cpignata) <
> cpignata@cisco.com>; wrote:
>
> Reshad, Greg,
>
>
>
> Indeed, it seems the content of the section is updated, but the title is
> misleading. The same applies to the active-tail doc:
>
>
>
> https://tools.ietf.org/html/draft-ietf-bfd-multipoint-
> active-tail-06#section-3.3.1
>
> https://tools.ietf.org/html/draft-ietf-bfd-multipoint-12#section-4.4.1
>
>
>
> Thanks,
>
>
>
> —
> Carlos Pignataro, carlos@cisco.com
>
> *“Sometimes I use big words that I do not fully understand, to make myself
> sound more photosynthesis."*
>
>
>
> On Jan 16, 2018, at 10:52 AM, Reshad Rahman (rrahman) <rrahman@cisco.com>;
> wrote:
>
>
>
> Hi Greg,
>
>
>
> Section 4.4.1 still says “New state variables” for bfd.SessionType and the
> text still starts with “A number of state variables and their values are
> added…”, so I misinterpreted that as bfd.SessionType is being added as new
> state variable.
>
>
>
> Please consider splitting this section in 2 parts for clarification e.g.
> 4.4.1 for New State Variables (bfd.SilentTail) and 4.4.2 for New State
> Variable Values (bfd.SessionType).
>
>
>
> https://tools.ietf.org/html/draft-ietf-bfd-multipoint-12#section-4.4.1
>
>
>
> Regards,
>
> Reshad.
>
>
>
> *From: *Greg Mirsky <gregimirsky@gmail.com>;
> *Date: *Monday, January 15, 2018 at 6:17 PM
> *To: *"Reshad Rahman (rrahman)" <rrahman@cisco.com>;
> *Cc: *Jeffrey Haas <jhaas@pfrc.org>;, "Carlos Pignataro (cpignata)" <
> cpignata@cisco.com>;, "rtg-bfd@ietf.org"; <rtg-bfd@ietf.org>;
> *Subject: *Re: WGLC for BFD Multipoint documents (last round)
>
>
>
> Hi Reshad,
>
> I thought I've addressed them as per Carlos suggestion. Have I missed
> anything?
>
>
>
> Regards, Greg
>
>
>
> On Jan 15, 2018 3:00 PM, "Reshad Rahman (rrahman)" <rrahman@cisco.com>;
> wrote:
>
> The changes for bfd.SessionType (it’s not a new state variable but uses
> what’s defined in RFC7880) weren’t made in the latest revision.
>
> Greg, do you plan on addressing this soon? Or there’s no consensus on this
> topic yet?
>
> Regards,
> Reshad.
>
> On 2017-12-20, 12:09 PM, "Rtg-bfd on behalf of Jeffrey Haas" <
> rtg-bfd-bounces@ietf.org on behalf of jhaas@pfrc.org>; wrote:
>
>     Greg,
>
>     On Tue, Dec 19, 2017 at 02:17:02PM -0800, Greg Mirsky wrote:
>     > Hi Carlos and Jeff,
>     > thank you for responding so expediently. I think we've reached the
> rough
>     > consensus. Attached are the diffs for both BFD documents and the
> updated
>     > copies. Please let me know if the changes being made have addressed
> all the
>     > comments received during the WGLC. I'll then upload new versions.
>
>     I believe this covers all points I've seen on the mailing list to date.
>
>     Please push the updates.
>
>     We'll have further discussion about the need for a registry in
> conjunction
>     with the Yang module implications discussion.
>
>     -- Jeff
>
>     > On Tue, Dec 19, 2017 at 8:05 AM, Jeffrey Haas <jhaas@pfrc.org>;
> wrote:
>     [...]
>     > > At this point it is also worth noting that the session type has no
>     > > centralized location covering their enumerations.  This leads to
> two
>     > > interesting observations:
>     > > - We could have an IANA registry for such things.  However, I'm
> not sure
>     > >   this is really need.  But this also means:
>     > > - Here's another case why some pieces of the BFD yang module
> likely shoudl
>     > >   be IANA maintained.  In this case, the bfd-path-type identity as
> the
>     > >   relevant example.
>
>
>
>
>
> <Diff_ draft-ietf-bfd-multipoint-active-tail-06.txt -
> draft-ietf-bfd-multipoint-active-tail-07.txt.html>
>
> <Diff_ draft-ietf-bfd-multipoint-12.txt - draft-ietf-bfd-multipoint-13.
> txt.html>
>
>
>