[Sipping-tispan] ACR Requirements

Dear all,
After several discussions I had the last days regarding the ACR requirements I would like to propose the following:

1. To define a requirement that marks a communication where the ID is network restricted. The rest with regard to ACR is the definition how the service will use such a network restricted information.

E.G
[ACR-2] To avoid that the ACR rejects communications that have no originating Identity due to the fact that this was restricted by the network and not by a privacy service initiated or initiated on behalf by the originator of the communication a indication is needed to mark that communication as a network restricted communication.

2. To delete the by-pass requirement for authorities.

Due to the bypass of ACR several issues were discussed. Fact is it is not clear if this is required by regulation or not. It was mentioned that a originating identification is needed. Due to the fact that there is an other requirement ([REQ-CAT-1] For service applicability to special groups and interoperability with the PSTN/ISDN an indication of the originating party category is needed. This is needed due to the fact that some services apply a special behaviour to special user groups (e.g., like Pay-Phones). And [REQ-CAT-2] The originating party category referred to in REQ-CAT-1 must be inserted by a trusted entity. ) it is proposed to use this functionality then if a bypass is needed. This requirement is independent from the ACR bypass, because a originating user indication (Calling Party's Category) is needed anyway.

I hope we can go such a way and solve  the network restricted problem.

Best Regards

Roland

Deutsche Telekom AG
T-Com Zentrale
Roland Jesske, TE332-2
Section TE33; Signalling, Gateways and Switching Systems 
Am Kavalleriesand 3, 64295 Darmstadt, Germany
Phone:  +49 6151 83-5940 
Fax:      +49 6151 83-4577 
email:   r.jesske@t-com.net