Re: [Teas] Network Slicing design team definitions - isolation and resolution

["Dongjie (Jimmy)" <[e-mail]>]

Hi Joel, 

In those referenced text, isolation is described as one requirement of VPN from both customers and operators' point of view. And as discussed in previous mails, isolation is also considered as one important requirement for slicing, thus it would be weird to me if isolation is not mentioned in this document. That said, the text in this draft could be improved, and suggestions are welcome.

As you pointed out, the meaning of isolation in the VPN context could be different from the isolation in network slicing. While please note that besides isolation of reachability, RFC 4031 also mentions additional requirement on isolation: 

"An L3VPN solution SHOULD provide a means to meet L3VPN QoS SLA requirements that isolates VPN traffic from the effects of traffic offered by non-VPN customers. Also, L3VPN solutions SHOULD provide a means to isolate the effects that traffic congestion produced by sites as part of one VPN can have on another VPN."

How to describe this as a parameter is something needs further discussion. 

Best regards,
Jie

> -----Original Message-----
> From: Joel Halpern Direct [mailto:[e-mail]]
> Sent: Tuesday, April 28, 2020 9:40 PM
> To: Dongjie (Jimmy) <[e-mail]>
> Cc: [e-mail]
> Subject: Re: [Teas] Network Slicing design team definitions - isolation and
> resolution
> 
> Those are indeed uses of the word isolation.
> In none of those cases is isolation a parameter to the VPN or a
> variable.   it is part of teh definition of a VPN.
> 
> More importantly, those definitions describe something very different from
> what the network slicing definitions draft describesas isolation.
> Providing yet more evidence that we should remove the description from that
> draft.
> 
> Yours,
> Joel
> 
> On 4/28/2020 5:30 AM, Dongjie (Jimmy) wrote:
> > Hi Joel and Greg,
> >
> > As I mentioned during the virtual meeting, isolation was described as a
> requirement in several PPVPN requirement and framework RFCs. In summary,
> isolation is firstly required to avoid unwanted exposure of both data traffic and
> routing information, then it is also mentioned that isolation is needed to avoid
> the effects of traffic congestion happened in other VPNs in the network.
> >
> > Just quote some of them:
> >
> > RFC 3809: Generic Requirements for Provider Provisioned Virtual
> > Private Networks (PPVPN)
> >
> > 4.4.  Data isolation
> >
> >     The PPVPN MUST support forwarding plane isolation.  The network
> MUST
> >     never deliver user data across VPN boundaries unless the two VPNs
> >     participate in an intranet or extranet.
> >
> >     Furthermore, if the provider network receives signaling or routing
> >     information from one VPN, it MUST NOT reveal that information to
> >     another VPN unless the two VPNs participate in an intranet or
> >     extranet.
> >
> >
> > RFC 4031: Service Requirements for Layer 3 Provider Provisioned
> > Virtual Private Networks (PPVPNs)
> >
> > 4.1.  Isolated Exchange of Data and Routing Information
> >
> >     A mechanism must be provided for isolating the distribution of
> >     reachability information to only those sites associated with a VPN.
> >     ...
> >     Note that isolation of forwarded data or exchange of reachability
> >     information to only those sites that are part of a VPN may be viewed
> >     as a form of security - for example, [Y.1311.1], [MPLSSEC].
> >
> > 5.8.  Isolation
> >
> >     These features include traffic and routing information exchange
> >     isolation, similar to that obtained in VPNs based on Layer 1 and
> >     Layer 2 (e.g., private lines, FR, or ATM) [MPLSSEC].
> >
> > 6.8.  Isolation of Traffic and Routing
> >     ...
> >     From a high-level SP perspective, a PE-based L3VPN MUST isolate the
> >     exchange of traffic and routing information to only those sites that
> >     are authenticated and authorized members of a VPN.
> >
> >     In a CE-based VPN, the tunnels that connect the sites effectively
> >     meet this isolation requirement if both traffic and routing
> >     information flow over the tunnels.
> >
> >     An L3VPN solution SHOULD provide a means to meet L3VPN QoS SLA
> >     requirements that isolates VPN traffic from the effects of traffic
> >     offered by non-VPN customers.  Also, L3VPN solutions SHOULD provide
> a
> >     means to isolate the effects that traffic congestion produced by
> >     sites as part of one VPN can have on another VPN.
> >
> >
> > RFC 4110: A Framework for Layer 3 Provider-Provisioned Virtual Private
> > Networks (PPVPNs)
> >
> > 1.2 Overview of Virtual Private Networks
> >
> >     In PE-based layer 3 VPNs, the PE devices may
> >     route the VPN traffic based on the customer addresses found in the IP
> >     headers; this implies that the PE devices need to maintain a level of
> >     isolation between the packets from different customer networks.
> >     ...
> >     Tunneling is also important for other reasons, such as providing
> >     isolation between different customer networks, allowing a wide range
> >     of protocols to be carried over an SP network, etc.  Different QoS
> >     and security characteristics may be associated with different
> >     tunnels.
> >
> > 4. 3 VPN Tunneling
> >
> >     Another capability optionally provided by tunneling is that of
> >     isolation between different VPN traffic flows.  The QoS and security
> >     requirements for these traffic flows may differ, and can be met by
> >     using different tunnels with the appropriate characteristics.  This
> >     allows a provider to offer different service characteristics for
> >     traffic in different VPNs, or to subsets of traffic flows within a
> >     single VPN.
> >
> >
> > Hope this helps.
> >
> > Best regards,
> > Jie
> >
> >> -----Original Message-----
> >> From: Teas [mailto:[e-mail]] On Behalf Of Joel M.
> >> Halpern
> >> Sent: Tuesday, April 28, 2020 5:33 AM
> >> To: Greg Mirsky <[e-mail]>
> >> Cc: [e-mail]
> >> Subject: Re: [Teas] Network Slicing design team definitions -
> >> isolation and resolution
> >>
> >> Greg, that definition seems to be a specific subset of VPN.
> >> As far as I can tell, the slice definition does include what
> >> endpoints the slice participants can talk to.  Presumably, with some way to
> say "the Internet".
> >> So Whether the slice supports communication with the Internet or not
> >> is definitely an observable property.  I would tend not to call it isolation.
> >> Separately, the definition you propose is unrelated to the definition
> >> in the document, Which is why I suggest, for now, removing all
> >> discussion of isolation from the document.
> >>
> >> Yours,
> >> Joel
> >>
> >> On 4/27/2020 5:22 PM, Greg Mirsky wrote:
> >>> Dear Joel,
> >>> thank you for bringing the matter of "isolation" to the discussion.
> >>> I agree, that it is not practical to expect physical isolation in
> >>> modern networks. In my view, a transport slice that requires
> >>> isolation is as a transport connection that expects to receive data
> >>> only from the specific domain and not from any other domain. In
> >>> other words, I view isolation as the absence of mis-connectivity (in
> >>> transport network interpretation which differentiates between path
> >>> continuity check and connectivity verification). If my
> >>> interpretation is acceptable, then isolation can be monitored using
> >>> connectivity verification OAM
> >> mechanism(s).
> >>> I much appreciate your thoughts, opinion on the proposed
> >>> interpretation of isolation on transport slice.
> >>>
> >>> Regards,
> >>> Greg
> >>>
> >>> On Sun, Apr 26, 2020 at 8:57 AM Joel Halpern Direct
> >>> <[e-mail] <mailto:[e-mail]>>
> >> wrote:
> >>>
> >>>      Trimmed, in line.
> >>>      Joel
> >>>
> >>>      On 4/26/2020 11:08 AM, Dongjie (Jimmy) wrote:
> >>>       > Hi Joel,
> >>>       >
> >>>       > Please see some replies inline:
> >>>       >
> >>>       >> -----Original Message-----
> >>>       >> From: Teas [mailto:[e-mail]
> >>>      <mailto:[e-mail]>] On Behalf Of Joel M. Halpern
> >>>       >> Sent: Sunday, April 26, 2020 10:52 AM
> >>>       >> To: Zhenghaomian <[e-mail]
> >>>      <mailto:[e-mail]>>; [e-mail]
> >> <mailto:[e-mail]>
> >>>       >> Subject: Re: [Teas] Network Slicing design team definitions -
> >>>      isolation and
> >>>       >> resolution
> >>>       >>
> >>>      ....
> >>>       >> More importantly, it is not something the customer has any way
> >>>      to verify.
> >>>       >> There is no test a customer can run that will verify this.
> >>>       >> Making unverifiable promises is rarely a useful thing to do.
> >>>       >
> >>>       > Totally agree that tools for verification is important. As
> >>>      mentioned in Haomian's mail, isolation can be verified with suitable
> >>>      tools which can be used to collect the information at the necessary
> >>>      places with a suitable interval. And it is important that customers
> >>>      can be provided with such tools to monitor the performance and be
> >>>      informed of SLA violation.
> >>>
> >>>      As far as I can tell, the observable that you describe is latency
> >>>      variation (or maybe loss).  Fine, describe the SLO in terms of latency
> >>>      variation  (or loss).  Given that there are always
> >>> imperfections in
> >> the
> >>>      system, the customer may think that the issue is isolation.  But
> >>>      what he
> >>>      can observe, and as far as I can tell what he cares about, is delay
> >>>      variation, loss, or other factors that affect his traffic.
> >>>
> >>>      To use a different example, I have learned from the advocates to hate
> >>>      bufferbloat.  But even their tests measure delay, delay variation,
> >>>      etc..
> >>>      They then infer the presence of large buffers.  But in fact, if the
> >>>      large buffers are present but never used, we would all be happy.  So
> >>>      the
> >>>      SLO on this would be in terms of latency, latency variation, loss, etc.
> >>>      Not bufferbloat.`
> >>>
> >>>      Yours,
> >>>      Joel
> >>>
> >>>       >
> >>>       > Best regards,
> >>>       > Jie
> >>>       >
> >>>       >>
> >>>       >> Yours,
> >>>       >> Joel
> >>>       >>
> >>>       >> PS: Note that I understand that operators get asked for odd
> >>>      things mby
> >>>       >> customers.  But if we are going to define standards to support
> >>>      it, we need to
> >>>       >> understand the actual need.
> >>>       >>
> >>>       >> On 4/25/2020 10:44 PM, Zhenghaomian wrote:
> >>>       >>> Not sure if I understand your question correctly.
> >>>       >>> Well, it's reasonable for people to request hard isolation
> >>>      because 'I don't want
> >>>       >> my data to be transported together with other people's data'.
> >>>       >>> For delivery this can be achieved by separating physical
> >>>      devices/connections,
> >>>       >> which are visible to users. For example dedicated boxes and
> >>>      fibers will guarantee
> >>>       >> the user's data is not mixed with others...
> >>>       >>>
> >>>       >>> Best wishes,
> >>>       >>> Haomian
> >>>       >>>
> >>>       >>> -----邮件原件-----
> >>>       >>> 发件人: Joel M. Halpern [mailto:[e-mail]
> >>>      <mailto:[e-mail]>]
> >>>       >>> 发送时间: 2020年4月26日 10:34
> >>>       >>> 收件人: Zhenghaomian <[e-mail]
> >>>      <mailto:[e-mail]>>; [e-mail]
> >> <mailto:[e-mail]>
> >>>       >>> 主题: Re: [Teas] Network Slicing design team definitions -
> >>>      isolation and
> >>>       >>> resolution
> >>>       >>>
> >>>       >>> (trimmed)
> >>>       >>> What is the user perceivable effect that the user is asking for
> >>>      when you say "if
> >>>       >> the user requests isolation"?
> >>>       >>>
> >>>       >>> Yours,
> >>>       >>> Joel
> >>>       >>>
> >>>       >>> On 4/25/2020 10:31 PM, Zhenghaomian wrote:
> >>>       >>>> Hi, Kiran, Joel,
> >>>       >>>>
> >>>       >>> ...
> >>>       >>>> BTW, regarding the isolation, I don't see the necessity to
> >>>      argue whether it
> >>>       >> should be in SLO or not. The isolation itself, can either be
> >>>      requested by the user
> >>>       >> of the transport slice (then from NBI of TSC) to express the
> >>>      demand of reliability,
> >>>       >> or be offered by the provider of the transport slice (then from
> >>>      the SBI of TSC) to
> >>>       >> achieve the SLO requested from the user. In other words, if the
> >>>      user requests
> >>>       >> certain level of isolation in an SLO, such isolation should be
> >>>      provided; if the user
> >>>       >> does not request certain level of isolation (no isolation
> >>>      request in SLO), then
> >>>       >> there may be some isolation provided to satisfy the user's
> >> request.
> >>>       >>>>
> >>>       >>>> Best wishes,
> >>>       >>>> Haomian
> >>>       >>
> >>>       >> _______________________________________________
> >>>       >> Teas mailing list
> >>>       >> [e-mail] <mailto:[e-mail]>
> >>>       >> https://www.ietf.org/mailman/listinfo/teas
> >>>
> >>>      _______________________________________________
> >>>      Teas mailing list
> >>>      [e-mail] <mailto:[e-mail]>
> >>>      https://www.ietf.org/mailman/listinfo/teas
> >>>
> >>>
> >>> _______________________________________________
> >>> Teas mailing list
> >>> [e-mail]
> >>> https://www.ietf.org/mailman/listinfo/teas
> >>>
> >>
> >> _______________________________________________
> >> Teas mailing list
> >> [e-mail]
> >> https://www.ietf.org/mailman/listinfo/teas