Re: [tlp-interest] Question about 6.c.iii Legend - Re: AUTH48 [LB]: RFC 7450 <draft-ietf-mboned-auto-multicast-18.txt> NOW AVAILABLE

[RFC Editor <[e-mail]>]

Adding <[e-mail]> to the CC.

On Wed, Feb 04, 2015 at 07:56:36AM -0800, RFC Editor wrote:
> Hi Greg,
> 
> On Mon, Feb 02, 2015 at 09:54:14PM -0800, Greg Bumgardner wrote:
> > All,
> > 
> [snip]
> 
> > I do have a question regarding the LPR/copyright declaration. The pre-RFC-5378
> > designation was a carry-over from a much older version of the ID document.
> > The ID was completely re-written in 2011/12 and probably contains very
> > little, if any, text from the older drafts, going back nearly a decade now.
> > Can/Should the LPR be changed to TPL 4.0? I don't recall any discussion
> > regarding the LPR declaration since I began work on the spec as it exists
> > today.
> 
> Item 4 on the Copyright FAQ
> <http://trustee.ietf.org/copyright-faq.html> provides some information
> about when the 6.c.iii Legend should be included. 
> 
> In addition, we have added <[e-mail]> to this thread in the
> hopes that they can provide additional guidance. 
> 
> Please let us know if any changes are needed.
> 
> Thank you,
> RFC Editor/sg
> 
> > 
> > Thanks,
> > 
> > -g.b.
> > 
> 
> > >
> > > Updated 2015/02/02
> > >
> > > RFC Author(s):
> > > --------------
> > >
> > > Instructions for Completing AUTH48 in XML
> > >
> > > This is your last chance to make changes to your RFC-to-be:
> > > draft-ietf-mboned-auto-multicast-18.txt.
> > > Once the document is published as an RFC, we will not make changes.
> > > Please follow the instructions below to complete the AUTH48 process.
> > > (For frequently asked questions, please see
> > > http://www.rfc-editor.org/rfcfaq.html#auth48.)
> > >
> > > 1) Review the edited document completely.  The files are available here:
> > >
> > >    http://www.rfc-editor.org/authors/rfc7450.txt
> > >    http://www.rfc-editor.org/authors/rfc7450-diff.html
> > >
> > >    We recommend reviewing the entire document, not just the diff file.
> > >    FYI, http://tools.ietf.org/rfcdiff provides tools to make various
> > >    kinds of diff files.
> > >
> > >    The placement of page breaks will be handled during the final stages of
> > >    publication (typically post-xml2rfc processing).
> > >
> > > 2) Review and resolve (as necessary) any questions raised by the RFC
> > >    Editor.  The questions (if any) have been included in the XML file as
> > >    comments marked <!-- [rfced] ... --> and will be sent in a subsequent
> > > email.
> > >
> > >    Retrieve the edited XML file here:
> > >
> > >       http://www.rfc-editor.org/authors/rfc7450.xml
> > >
> > >    (Note that you may need to view the page source to save the file.)
> > >
> > > 3) Send us your changes or respond with your approval for publication.
> > >    Please use 'REPLY ALL' so that [e-mail] and the
> > > parties
> > >    CC'ed on this message receive your response. Note that your document
> > > will
> > >    not move forward until we have received approvals from each of the
> > >    authors listed on the front page.
> > >
> > >    If sending changes, please do one of the following:
> > >
> > >    a. Update the provided XML file, then email us the revised XML file.
> > >       You may use any filename for the revised file; we will rename it
> > >       before posting it.
> > >
> > >    --OR--
> > >
> > >    b. Provide us with an explicit list of changes in this format.
> > >
> > >       Section # (or indicate Global)
> > >
> > >       OLD:
> > >       old text
> > >
> > >       NEW:
> > >       new text
> > >
> > >    Be sure to pay particular attention to these areas of the document:
> > >    - IANA Considerations updates (if applicable)
> > >    - Contact information
> > >    - Copyright notice and legends (see item 5 for more details)
> > >
> > > 4) Review changes submitted by your coauthors (if any).  We assume that
> > >    you will speak up if you do not agree with the proposed changes.
> > >    That is, your silence is your assent to changes submitted by your
> > >    coauthors. Note that any changes that are beyond editorial will be
> > >    sent to the relevant body for approval.
> > >
> > > 5) Review the copyright notice and legends as defined in RFC 5378 and
> > >    the Trust Legal Provisions (TLP --
> > > http://trustee.ietf.org/license-info/).
> > >
> > >    If your document was approved for publication with a pre-RFC-5378
> > >    copyright notice, we have applied the text from section 6.c.iii of the
> > >    TLP.  Please consider whether this text is required (note that the
> > >    6.c.iii text is not applicable to Alternate Stream RFCs).  See item
> > >    4.5 of the "Copyright FAQ" at http://trustee.ietf.org/faqs.html for
> > >    guidance on whether this text applies to your document.
> > >
> > > 6) Please reply, as the document will not be published until we receive
> > >    approvals from each author.  The details of the AUTH48 status of your
> > >    document are here:
> > >
> > >    http://www.rfc-editor.org/auth48/rfc7450
> > >
> > > Thank you for your cooperation,
> > >
> > > RFC Editor
> > >
> > > --------------------------------------
> > > RFC7450 (draft-ietf-mboned-auto-multicast-18)
> > > --------------------------------------
> > > Title            : Automatic Multicast Tunneling
> > > Author(s)        : G. Bumgardner
> > > WG Chair(s)      : Greg Shepherd, Leonard Giuliano
> > > Area Director(s) : Benoit Claise, Joel Jaeggli
> > >
> > >
> > 
> > 
> > -- 
> > Greg Bumgardner
> > Eugene, OR
> 
> 
> 
> 
> 
> 
> 
> 
> 
> 
> 
> 
> 
> 
> 
> 
> 
> 
> 
> 
> 
> 
> 
> 
> 
> 
> 
> 
> 
> 
> 
> 
> 
> 
> 
> 
> 
> 
> 
> 
> 
> 
> 
> 
> 
> 
> 
> 
> 
> 
> 
> 
> 
> 
> 
> 
> 
> 
> 
> 
> 
> 
> 
> 
> 
> 
> 
> 
> 
> 
> 
> 
> 
> 
> 
> 
> 
> 
> 
> 
> 
> 
> 
> 
> 
> 
> 
> 
> 
> 
> 
> 
> 
> 
> 
> 
> 
> 
> 
> 
> 
> 
> 
> 
> 
> 
> 
> 
> 
> 
> 
> 
> 
> 
> 
> 
> 
> 
> 
> 
> 
> 
> 
> 
> 
> 
> 
> 
> 
> 
> 
> 
> 
> 
> 
> 
> 
> 
> 
> 
> 
> 
> 
> ------+
> 
> 
> 
> 
> 
> 
> 
> 
> 
> 
> 
> 
> 
> 
> 
> 
> 
> 
> 
> 
> 
> ------+
> 
> 
> 
> 
> 
> 
> 
> 
> 
> 
> 
> 
> 
> 
> 
> 
> 
> 
> 
> 
> 
> 
> 
> 
> 
> 
> 
> 
> 
> 
> 
> 
> 
> 
> 
> 
> 
> 
> 
> 
> 
> 
> 
> 
> 
> 
> 
> 
> 
> 
> 
> 
> 
> 
> 
> 
> 
> 
> 
> 
> 
> 
> 
> 
> 
> 
> 
> 
> 
> 
> 
> 
> 
> 
> 
> 
> 
> 
> 
> 
> 
> 
> 
> 
> 
> 
> 
> 
> 
> 
> 
> 
> 
> 
> 
> 
> 
> 
> 
> 
> 
> 
> 
> 
> 
> 
> 
> 
> 
> 
> 
> 
> 
> 
> 
> 
> 
> 
> 
> 
> 
> 
> 
> 
> 
> 
> 
> 
> 
> 
> 
> 
> 
> 
> 
> 
> 
> 
> 
> 
> 
> 
> 
> 
> 
> 
> 
> 
> 
> 
> 
> 
> 
> 
> 
> 
> 
> 
> 
> 
> 
> 
> 
> 
> 
> 
> 
> 
> 
> 
> 
> 
> 
> 
> 
> 
> 
> 
> 
> 
> 
> 
> 
> 
> 
> 
> 
> 
> 
> 
> 
> 
> 
> 
> 
> 
> 
> 
> 
> 
> 
> 
> 
> 
> 
> 
> 
> 
> 
> 
> 
> 
> 
> 
> 
> 
> 
> 
> 
> 
> 
> 
> 
> 
> 
> 
> 
> 
> 
> 
> 
> 
> 
> 
> 
> 
> 
> 
> 
> 
> 
> 
> 
> 
> 
> 
> 
> 
> 
> 
> 
> 
> 
> 
> 
> 
> 
> 
> 
> 
> 
> 
> 
> 
> 
> 
> 
> 
> 
> 
> 
> 
> 
> 
> 
> 
> 
> 
> 
> 
> 
> 
> 
> 
> 
> 
> 
> 
> 
> 
> 
> 
> 
> 
> 
> 
> 
> 
> 
> 
> 
> 
> 
> 
> 
> 
> 
> 
> 
> 
> 
> 
> 
> 
> 
> 
> 
> 
> 
> 
> 
> 
> 
> 
> 
> 
> 
> 
> 
> 
> 
> 
> 
> 
> 
> 
> 
> 
> 
> 
> 
> 
> 
> 
> 
> 
> 
> 
> 
> 
> 
> 
> 
> 
> 
> 
> 
> 
> 
> 
> 
> 
> 
> 
> 
> 
> 
> 
> 
> 
> 
> 
> 
> 
> 
> 
> 
> 
> 
> 
> 
> 
> 
> 
> 
> 
> 
> 
> 
> 
> 
> 
> 
> 
> 
> 
> 
> 
> 
> 
> 
> 
> 
> 
> 
> 
> 
> 
> 
> 
> 
> 
> 
> 
> 
> 
> 
> 
> 
> 
> 
> 
> 
> 
> 
> 
> 
> 
> 
> 
> 
> 
> 
> 
> 
> 
> 
> 
> 
> 
> 
> 
> 
> 
> 
> 
> 
> 
> 
> 
> 
> 
> 
> 
> 
> 
> 
> 
> 
> 
> 
> 
> 
> 
> 
> 
> 
> 
> 
> 
> 
> 
> 
> 
> 
> 
> 
> 
> 
> 
> 
> 
> 
> 
> 
> 
> 
> 
> 
> 
> 
> 
> 
> 
> 
> 
> 
> 
> 
> 
> 
> 
> 
> 
> 
> 
> 
> 
> 
> 
> 
> 
> 
> 
> 
> 
> 
> 
> 
> 
> 
> 
> 
> 
> 
> 
> 
> 
> 
> 
> 
> 
> 
> 
> 
> 
> 
> 
> 
> 
> 
> 
> 
> 
> 
> 
> 
> 
> 
> 
> 
> 
> 
> 
> 
> 
> 
> 
> 
> 
> 
> 
> 
> 
> 
> 
> 
> 
> 
> 
> 
> 
> 
> 
> 
> 
> 
> 
> 
> 
> 
> 
> 
> 
> 
> 
> 
> 
> 
> 
> 
> 
> 
> 
> 
> 
> 
> 
> 
> 
> 
> 
> 
> 
> 
> 
> 
> 
> 
> 
> 
> 
> 
> 
> 
> 
> 
> 
> 
> 
> 
> 
> 
> 
> 
> 
> 
> 
> 
> 
> 
> 
> 
> 
> 
> 
> 
> 
> 
> 
> 
> 
> 
> 
> 
> 
> 
> 
> 
> 
> 
> 
> 
> 
> 
>