Re: [trill] WG Last Call: draft-ietf-trill-fine-labeling-02.txt

Support!

I have the following editorial comments,

* Section 4.0
    -- First line in third paragraph : FLG should be changed to FGL
    -- Similar typo needs to be fixed in the 4th paragraph, LFG should be changed to FGL
* Section 5.0
    -- Suggest changing the following sentence as below make the intent more explicit and remove ambiguity,

Current: "The FGL ingress process MUST place the priority and DEI associated with an ingressed native frame in upper 4 bits of the Inner.Label Low Order part."

New: "The FGL ingress process MUST copy the priority and DEI from an ingressed native frame to upper 4 bits of the Inner.Label Low Order part."

* Section 7.0
    -- I see reference to first and second part of FGL. In previous sections same fields are referred to as High and Low parts of FGL. It may be better to use one name consistently across the doc.

Thanks!
--Rajeev

-----Original Message-----
From: trill-bounces@ietf.org [mailto:trill-bounces@ietf.org] On Behalf Of Donald Eastlake
Sent: Tuesday, November 06, 2012 12:43 PM
To: trill@ietf.org
Subject: [trill] WG Last Call: draft-ietf-trill-fine-labeling-02.txt

Hi,

As announced at the TRILL WG meeting today, this starts a two week WG
Last Call on draft-ietf-trill-fine-labeling ending 19 November.

Thanks,
Donald
=============================
 Donald E. Eastlake 3rd   +1-508-333-2270 (cell)
 155 Beaver Street, Milford, MA 01757 USA
 d3e3e3@gmail.com
_______________________________________________
trill mailing list
trill@ietf.org
https://www.ietf.org/mailman/listinfo/trill