Re: [art] [EXTERNAL] Artart last call review of draft-ietf-lamps-ocsp-nonce-update-04

[Himanshu Sharma <[e-mail]>]

Hi Jim,
   In case the updated ID was missed, Please have a look as It satisfies
all the feedback and suggestions provided by you.

-Thanks
Himanshu

On Tue, Apr 2, 2024 at 12:13 PM Himanshu Sharma <[e-mail]>
wrote:

> Hi Jim
>     Thanks for all the suggestions and pointing you the IDNITS errors.
> I have changed the content according to your suggestions, corrected the
> reference, and moved RFC 5912 to the informative reference section from
> normative reference section.
> Russ has verified the ASN.1 module and it compiles fine.
> Now this draft has 0 errors reported from IDNITS.
> Meanwhile I have reached out to Joseph Salowey and am working with him to
> address the feedback he has provided.
>
> Himanshu
>
>
>
> On Mon, Apr 1, 2024 at 3:12 PM Himanshu Sharma <[e-mail]>
> wrote:
>
>> Thanks Jim for your time to review the Draft.
>>  I will work on the suggestions and update the draft accordingly.
>>
>>
>>
>> On Mon, Apr 1, 2024 at 11:04 AM Jim Fenton via Datatracker <
>> [e-mail]> wrote:
>>
>>> Reviewer: Jim Fenton
>>> Review result: Almost Ready
>>>
>>> I am the designated ART ART reviewer for
>>> draft-ietf-lamps-ocsp-nonce-update-04.
>>>
>>> Status: Almost ready
>>>
>>> Comments:
>>>
>>> Section 1, suggest replacing "[RFC8954] enforce the maximum" to
>>> "[RFC8954]
>>> limits the maximum"
>>>
>>> Section 2, suggest replacing "enforce" with "limit".
>>>
>>> Section 2.1 paragraph 1 can be deleted since this is replacing RFC8954
>>> in its
>>> entirety.
>>>
>>> Section 2.1 paragraph 3: "An OCSP client that implements this document
>>> SHOULD
>>> use a minimum length of 32 octets..." while RFC 8954 says, "Newer OCSP
>>> clients
>>> that support this document MUST use a length of 32 octets..." It seems
>>> like
>>> this requirement has been weakened; is there a reason for that? Also in
>>> that
>>> paragraph, rather than "in excess of what is permitted by RFC 8954"
>>> suggest
>>> saying "in excess of the limit of 32 octets that was specified in RFC
>>> 8954."
>>>
>>> Section 2.1 paragraph 4: replace "...MUST accept Nonce octets length of
>>> at
>>> least 16 octets..." with "...MUST accept Nonce lengths of at least 16
>>> octets..."
>>>
>>> Section 2.1 paragraph 5: replace "Nonce octet length" with "Nonce length"
>>>
>>> In the example, the object identifier, in addition to Offset and Length,
>>> is in
>>> decimal.
>>>
>>> I don't have the expertise in ASN.1 to fully review Appendix A; hopefully
>>> another reviewer can check that.
>>>
>>> IDNITS points out that you have a normative reference to RFC 5912, which
>>> is
>>> informational. I'm not sure the reference is really normative, though.
>>>
>>>
>>>