Re: [AVT] I-D Action:draft-ietf-avt-rapid-acquisition-for-rtp-11.txt

This is the text I suggest:

"Optional TLV element that denotes the time the burst will last (in ms), i.e., the delta difference between the transmission times of the first and the last burst packet that BRS is planning to send in the respective RTP stream."

Does this work for everyone?

-acbegen

> -----Original Message-----
> From: Peilin YANG [mailto:yangpeilin@huawei.com]
> Sent: Tuesday, August 24, 2010 12:00 PM
> To: Ali C. Begen (abegen)
> Cc: Colin Perkins; avt@ietf.org
> Subject: Re: [AVT] I-D Action:draft-ietf-avt-rapid-acquisition-for-rtp-11.txt
> 
> 
> Hi Ali,
> 
> Take Colin's example, do you mean if BRS sends the burst at twice the normal bitrate, Burst Duration is 1000ms; if BRS sends
> the burst at 1.5 times the normal bitrate, Burst Duration is 2000ms?
> 
> Peilin
> 
> 
> 
> ----- 原邮件 -----
> 发件人: "Ali C. Begen (abegen)" <abegen@cisco.com>
> 日期: 星期二, 八月 24日, 2010 下午3:56
> 主题: Re: [AVT] I-D Action:draft-ietf-avt-rapid-acquisition-for-rtp-11.txt
> 收件人: Colin Perkins <csp@csperkins.org>, avt@ietf.org
> 
> > > In section 7.3, does the Burst Duration optional TLV element measure
> > > the duration of the burst in terms of the media data it
> > contains, or
> > > does it measure the time it will take the BRS to send the burst
> > (i.e.,> if the burst codes video that will play for one second,
> > but I have
> > > sufficient bandwidth to send at twice the normal rate, will the
> > Burst> Duration be 1000ms or 500ms)? The current text can be
> > interpreted> either way.
> >
> > It is the latter, i.e., time that will take the BRS to send the data.
> >
> > Will make this clear in the revision.
> >
> > -acbegen
> >
> > > --
> > > Colin Perkins
> > > http://csperkins.org/
> > >
> > >
> > >
> > > _______________________________________________
> > > Audio/Video Transport Working Group
> > > avt@ietf.org
> > > https://www.ietf.org/mailman/listinfo/avt
> > _______________________________________________
> > Audio/Video Transport Working Group
> > avt@ietf.org
> > https://www.ietf.org/mailman/listinfo/avt
> >