RE: [AVT] I-D ACTION:draft-ietf-avt-rtp-ac3-02.txt

Hi,

As quoted below, I have submitted a revised version of the RTP payload
format for AC-3. I believe it addresses all the comments I received
about the last version, except one: I have left the SMPTE time stamps in
the payload specific header since they are optional. There has been some
discussion of finding a mechanism to generalize this capability for
other payload formats. I support that and also find value in keeping
this optional mechanism in place. When I proposed keeping it to the AVT
reflector, I heard no objections.

Please review this version of the document and offer any feedback you
have.

I've made these changes in the -02 version:
-Changed the title to refer to AC-3 Audio instead of AC-3 Streams.
-Moved change log from document to email.
-Moved key word conventions from separate section to introduction.
-In 2.1, added clarification that the Synchronization Information field
is for codec synchronization.
-Noted that figure 2 does not specify field sizes.
-In 4., clarified initialization of RTP time stamp.
-In the payload specific headers (5.1), changed the name of Time Code
Mode (TCM) to Time Stamp Mode (TSM) because, strictly, SMPTE time code
(defined for specific electrical transmission) is not included. Rather,
time stamps based on SMPTE time code notation are included.
-In 6.1, simplified definition of ptime.
-Changed language for change controller.
-In 6.2, clarified SDP usage and explained that special considerations
for offer/answer mode are not needed.
-In 7., added mention of an RTP profile imposing security considerations
and a reference to SRTP.
-In 10., added reference info for SRTP.

Best regards,
Brian

---
Brian Link
Dolby Laboratories, 100 Potrero Ave., San Francisco, CA 94103
phone: 415-558-0324  fax: 415-863-1373
email: bdl@dolby.com   alt email: link@ieee.org

-----Original Message-----
From: avt-bounces@ietf.org [mailto:avt-bounces@ietf.org] On Behalf Of
Internet-Drafts@ietf.org
Sent: Tuesday, February 01, 2005 12:49 PM
To: i-d-announce@ietf.org
Cc: avt@ietf.org
Subject: [AVT] I-D ACTION:draft-ietf-avt-rtp-ac3-02.txt

A New Internet-Draft is available from the on-line Internet-Drafts
directories.
This draft is a work item of the Audio/Video Transport Working Group of
the IETF.

	Title		: RTP Payload Format for AC-3 Streams
	Author(s)	: J. Flaks, et al.
	Filename	: draft-ietf-avt-rtp-ac3-02.txt
	Pages		: 11
	Date		: 2005-2-1

This document describes an RTP payload format for transporting AC-3
encoded audio data.  AC-3 is a high quality, multichannel audio coding
system used in US HDTV, DVD, cable and satellite television and other
media.  The RTP payload format as presented in this document includes
support for data fragmentation.

A URL for this Internet-Draft is:
http://www.ietf.org/internet-drafts/draft-ietf-avt-rtp-ac3-02.txt

To remove yourself from the I-D Announcement list, send a message to
i-d-announce-request@ietf.org with the word unsubscribe in the body of
the message.  
You can also visit https://www1.ietf.org/mailman/listinfo/I-D-announce
to change your subscription settings.

Internet-Drafts are also available by anonymous FTP. Login with the
username "anonymous" and a password of your e-mail address. After
logging in, type "cd internet-drafts" and then
	"get draft-ietf-avt-rtp-ac3-02.txt".

A list of Internet-Drafts directories can be found in
http://www.ietf.org/shadow.html or
ftp://ftp.ietf.org/ietf/1shadow-sites.txt

Internet-Drafts can also be obtained by e-mail.

Send a message to:
	mailserv@ietf.org.
In the body type:
	"FILE /internet-drafts/draft-ietf-avt-rtp-ac3-02.txt".

NOTE:	The mail server at ietf.org can return the document in
	MIME-encoded form by using the "mpack" utility.  To use this
	feature, insert the command "ENCODING mime" before the "FILE"
	command.  To decode the response(s), you will need "munpack" or
	a MIME-compliant mail reader.  Different MIME-compliant mail
readers
	exhibit different behavior, especially when dealing with
	"multipart" MIME messages (i.e. documents which have been split
	up into multiple messages), so check your local documentation on
	how to manipulate these messages.

Below is the data which will enable a MIME compliant mail reader
implementation to automatically retrieve the ASCII version of the
Internet-Draft.

-----------------------------------------
This message (including any attachments) may contain confidential
information intended for a specific individual and purpose.  If you are not
the intended recipient, delete this message.  If you are not the intended
recipient, disclosing, copying, distributing, or taking any action based on
this message is strictly prohibited.

_______________________________________________
Audio/Video Transport Working Group
avt@ietf.org
https://www1.ietf.org/mailman/listinfo/avt