[Disman] Please accept draft-ietf-disman-event-mib-03.txt for posting
Ramanathan Kavasseri <ramk@cisco.com> Sat, 14 June 2003 07:26 UTC
Received: from www1.ietf.org (ietf.org [132.151.1.19] (may be forged)) by ietf.org (8.9.1a/8.9.1a) with ESMTP id DAA20959 for <disman-archive@lists.ietf.org>; Sat, 14 Jun 2003 03:26:33 -0400 (EDT)
Received: from www1.ietf.org (localhost.localdomain [127.0.0.1]) by www1.ietf.org (8.11.6/8.11.6) with ESMTP id h5DMJ1a27590; Fri, 13 Jun 2003 18:19:01 -0400
Received: from ietf.org (lists.ietf.org [132.151.1.176]) by www1.ietf.org (8.11.6/8.11.6) with ESMTP id h5DMI7m27502 for <disman@optimus.ietf.org>; Fri, 13 Jun 2003 18:18:07 -0400
Received: from ietf-mx (ietf-mx.ietf.org [132.151.6.1]) by ietf.org (8.9.1a/8.9.1a) with ESMTP id SAA26115; Fri, 13 Jun 2003 18:17:03 -0400 (EDT)
Received: from ietf-mx ([132.151.6.1]) by ietf-mx with esmtp (Exim 4.12) id 19Qwox-0001kc-00; Fri, 13 Jun 2003 18:14:55 -0400
Received: from sj-core-3.cisco.com ([171.68.223.137]) by ietf-mx with esmtp (Exim 4.12) id 19Qwov-0001kW-00; Fri, 13 Jun 2003 18:14:53 -0400
Received: from mira-sjc5-b.cisco.com (IDENT:mirapoint@mira-sjc5-b.cisco.com [171.71.163.14]) by sj-core-3.cisco.com (8.12.6/8.12.6) with ESMTP id h5DMGUI2022246; Fri, 13 Jun 2003 15:16:31 -0700 (PDT)
Received: from cisco.com (dhcp-128-107-166-145.cisco.com [128.107.166.145]) by mira-sjc5-b.cisco.com (Mirapoint Messaging Server MOS 3.3.3-GR) with ESMTP id AIC73001; Fri, 13 Jun 2003 15:11:10 -0700 (PDT)
Message-ID: <3EEA4D38.6060606@cisco.com>
From: Ramanathan Kavasseri <ramk@cisco.com>
User-Agent: Mozilla/5.0 (Windows; U; Windows NT 5.0; en-US; rv:1.0.1) Gecko/20020823
X-Accept-Language: en-us, en
MIME-Version: 1.0
To: internet-drafts@ietf.org
CC: disman@ietf.org
Content-Type: text/plain; charset="us-ascii"; format="flowed"
Content-Transfer-Encoding: 7bit
Content-Transfer-Encoding: 7bit
Subject: [Disman] Please accept draft-ietf-disman-event-mib-03.txt for posting
Sender: disman-admin@ietf.org
Errors-To: disman-admin@ietf.org
X-BeenThere: disman@ietf.org
X-Mailman-Version: 2.0.12
Precedence: bulk
List-Unsubscribe: <https://www1.ietf.org/mailman/listinfo/disman>, <mailto:disman-request@ietf.org?subject=unsubscribe>
List-Id: Distributed Management <disman.ietf.org>
List-Post: <mailto:disman@ietf.org>
List-Help: <mailto:disman-request@ietf.org?subject=help>
List-Subscribe: <https://www1.ietf.org/mailman/listinfo/disman>, <mailto:disman-request@ietf.org?subject=subscribe>
List-Archive: <https://www1.ietf.org/pipermail/disman/>
Date: Fri, 13 Jun 2003 15:16:24 -0700
Content-Transfer-Encoding: 7bit
Please accept draft-ietf-disman-event-mib-v2-03.txt for posting
as an internet draft.
Thank you,
Ram Kavasseri
Disman Working Group R. Kavasseri
Internet Draft Cisco Systems, Inc.
Document: draft-ietf-disman-event-mib-v2-03.txt B. Stewart
Expiration Date: December 2003 Retired
June 2003
Event MIB
Status of this Memo
This document is an Internet-Draft and is in full conformance with
all provisions of Section 10 of RFC2026.
Internet-Drafts are working documents of the Internet Engineering
Task Force (IETF), its areas, and its working groups. Note that
other groups may also distribute working documents as Internet-
Drafts.
Internet-Drafts are draft documents valid for a maximum of six months
and may be updated, replaced, or obsoleted by other documents at any
time. It is inappropriate to use Internet-Drafts as reference
material or to cite them other than as ``work in progress.''
The list of current Internet-Drafts can be accessed at
http://www.ietf.org/ietf/1id-abstracts.txt
The list of Internet-Draft Shadow Directories can be accessed at
http://www.ietf.org/shadow.html.
Distribution of this document is unlimited. Please send comments to
the Distributed Management Working Group, <disman@dorothy.BMC.com>.
Copyright Notice
Copyright (C) The Internet Society (2003). All Rights Reserved.
Abstract
This memo defines a portion of the Management Information Base (MIB)
for use with network management protocols in the Internet community.
In particular, it describes managed objects that can be used to
manage and monitor MIB objects and take action through events.
Internet Draft Distributed Management Event MIB 13 June 2003
The Event MIB provides the ability to monitor MIB objects on the
local system or on a remote system and take simple action when a
trigger condition is met.
The key words "MUST", "MUST NOT", "REQUIRED", "SHALL", "SHALL NOT",
"SHOULD", "SHOULD NOT", "RECOMMENDED", "MAY", and "OPTIONAL" in this
document are to be interpreted as described in RFC 2119.
Table of Contents
1 The SNMP Management Framework ............................... 2
2 Overview .................................................... 3
3 Relationship to Other MIBs .................................. 3
4 MIB Sections ................................................ 4
5 Operation ................................................... 5
6 Security .................................................... 7
7 Definitions ................................................. 7
8 Intellectual Property ....................................... 47
9 Acknowledgements ............................................ 47
10 References ................................................. 47
11 Security Considerations .................................... 49
12 Author's Address ........................................... 49
13 Editor's Address ........................................... 49
14 Full Copyright Statement ................................... 50
1. The SNMP Management Framework
The SNMP Management Framework presently consists of five major
components:
o An overall architecture, described in RFC 2571 [RFC2571].
o Mechanisms for describing and naming objects and events for the
purpose of management. The first version of this Structure of
Management Information (SMI) is called SMIv1 and described in
STD 16, RFC 1155 [RFC1155], STD 16, RFC 1212 [RFC1212] and RFC
1215 [RFC1215]. The second version, called SMIv2, is described
in STD 58, RFC 2578 [RFC2578], STD 58, RFC 2579 [RFC2579] and
STD 58, RFC 2580 [RFC2580].
o Message protocols for transferring management information. The
first version of the SNMP message protocol is called SNMPv1 and
described in STD 15, RFC 1157 [RFC1157]. A second version of
the SNMP message protocol, which is not an Internet standards
track protocol, is called SNMPv2c and described in RFC 1901
Expires December 2003 [Page 2]
Internet Draft Distributed Management Event MIB 13 June 2003
[RFC1901] and RFC 1906 [RFC1906]. The third version of the
message protocol is called SNMPv3 and described in RFC 1906
[RFC1906], RFC 2572 [RFC2572] and RFC 2574 [RFC2574].
o Protocol operations for accessing management information. The
first set of protocol operations and associated PDU formats is
described in STD 15, RFC 1157 [RFC1157]. A second set of
protocol operations and associated PDU formats is described in
RFC 1905 [RFC1905].
o A set of fundamental applications described in RFC 2573
[RFC2573] and the view-based access control mechanism described
in RFC 2575 [RFC2575].
A more detailed introduction to the current SNMP Management Framework
can be found in RFC 2570 [RFC2570].
Managed objects are accessed via a virtual information store, termed
the Management Information Base or MIB. Objects in the MIB are
defined using the mechanisms defined in the SMI.
Expires December 2003 [Page 3]
Internet Draft Distributed Management Event MIB 13 June 2003
This memo specifies a MIB module that is compliant to the SMIv2. A
MIB conforming to the SMIv1 can be produced through the appropriate
translations. The resulting translated MIB must be semantically
equivalent, except where objects or events are omitted because no
translation is possible (use of Counter64). Some machine readable
information in SMIv2 will be converted into textual descriptions in
SMIv1 during the translation process. However, this loss of machine
readable information is not considered to change the semantics of the
MIB. It may not be possible to meaningfully monitor Counter64
objects using an SMIv1 version of the MIB.
2. Overview
With network sizes well beyond the ability of people to manage them
directly, automated, distributed management is vital. An important
aspect of such management is the ability of a system to monitor
itself or for some other system to monitor it.
The Event MIB provides the ability to monitor MIB objects on the
local system or on a remote system and take simple action when a
trigger condition is met.
The MIB is intended to suit either a relatively powerful manager or
mid- level manager, as well as a somewhat more limited self-managing
system.
3. Relationship to Other MIBs
The Event MIB is based on extensive experience with the RMON MIB
[RFC1757] and provides a superset of the capabilities of the RMON
alarm and event groups. Conceptually, the key extension is the
ability to allow alarms to be generated for MIB objects that are on
another network element. The Event MIB calls "triggers" what the
RMON MIB called "alarms," but the concepts are the same. Event MIB
triggers maintain the RMON handling of thresholds and add the concept
of booleans. Event MIB events maintain the RMON concept of sending
an SNMP notification in response to a trigger and add the concept of
setting a MIB object.
The Event MIB is the successor and update to SNMPv2's Manager-to-
Manager MIB [RFC1451] which was declared Historic pending this work.
The Event MIB depends on the services of the SNMPv3 Management Target
and Notification MIBs [RFC2573].
Expires December 2003 [Page 4]
Internet Draft Distributed Management Event MIB 13 June 2003
The Event MIB is nicely complemented by the Distributed Management
Expression MIB [RFC2982], which is the expected source of boolean
objects to monitor. Note that there is considerable overlap between
the wildcard and delta sample capabilities of the Event and
Expression MIBs. A carefully-planned implementation might well use
common code to provide the overlapping functions.
4. MIB Sections
The MIB has four sections: triggers, objects, events, and
notifications. Triggers define the conditions that lead to events.
Events may cause notifications.
The trigger table lists what objects are to be monitored and how and
relates each trigger to an event. It has supplementary, companion
tables for additional objects that depend on the type of test done
for the trigger.
The objects table lists objects that can be added to notifications
based on the trigger, the trigger test type, or the event that
resulted in the notification.
The event table defines what happens when an event is triggered:
sending a notification, setting a MIB object or both. It has
supplementary, companion tables for additional objects that depend on
the action taken.
The notification section defines a set of generic notifications to go
with the events and for Event MIB error handling, and it defines a
set of objects to put in those notifications.
The following diagram describes the relationships between the tables
in the Event MIB.
Expires December 2003 [Page 5]
Internet Draft Distributed Management Event MIB 13 June 2003
+-----------------------------+
| mteTriggerEntry | subclassed by:
| { mteOwner, |---+
| IMPLIED mteTriggerName } | +-- mteTriggerDeltaEntry
| | |
| | +-- mteTriggerExistenceEntry
| | |
| | +-- mteTriggerBooleanEntry
| | |
| | +-- mteTriggerThresholdEntry
| |
| mteTrigger*Event -------------------------------->+
| | |
| mteTriggerObjects ------------------>+ |
+-----------------------------+ | |
| |
+-----------------------------+ V |
| mteObjectsEntry | | |
| { mteOwner, |<-------------+ |
| mteObjectsName, | |
| mteObjectsIndex } | |
+-----------------------------+ |
V
+---------------------------+ |
| mteEventEntry |<----------------------------+
| { mteOwner, |
| IMPLIED mteEventName } |
| |
| mteEventAction---> + (condition)
+---------------------------+ |
V
+---------------------------+ | +--------------------------+
| mteEventNotificationEntry | | | mteEventSetEntry |
| { mteOwner, |<--+-->| { mteOwner, |
| IMPLIED mteEventName } | | IMPLIED mteEventName } |
+---------------------------+ +---------------------------+
5. Operation
The Event MIB is instrumentation for a distributed management
application that monitors MIB objects. In its simplest form this
application monitors individual, local MIB objects, just as an RMON
probe fulfills the functions implied by RMON's alarm and event
operation. Additionally the application can monitor remote objects
and wildcarded groups of objects.
Expires December 2003 [Page 6]
Internet Draft Distributed Management Event MIB 13 June 2003
Remote monitoring uses the tag service of the Management Target MIB
[RFC2573] to select and access remote systems as an ordinary SNMP-
based management application. Local monitoring may be via a more
intimate, local interface which may, for example, bypass SNMP
encoding but otherwise is functionally identical to remote SNMP
operation, including the application of access control. A self-
management only system MAY not implement remote monitoring.
Wildcards indicate that the application SHOULD use a GetNext-type
operation to find the zero or more instances implied by a truncated
object identifier, just like an ordinary SNMP-based management
application. Each instance of a wildcard is treated as if it were a
separate entry, that is the instances of a wildcarded object are
independent of one another. For example, a wild-carded object may
trigger an event, and result in the setting of another wildcarded
object. The instance that satisfied the trigger function is used to
perform the set function. All of this takes place independently of
any additional instances that may fill the wildcard.
Error handling is by notification. These error notifications SHOULD
be enabled only for the diagnosis of problems indicated by error
counters. If minimizing the probability of notification loss is a
concern they SHOULD be transmitted as Inform PDUs as described in the
[SNMP-TARGET-MIB] or directed to a log as described in the
Notification Log MIB [rfcNotificationLogMIB]. Note that this does
not mean the Notification Log MIB is REQUIRED, since in fact
notifications usually are not lost, but that the Notification Log MIB
can be helpful with this as well as other MIBs that include
notifications.
Although like most MIBs this one has no explicit controls for the
persistence of the values set in configuring events, a robust, polite
implementation would certainly not force its managing applications to
reconfigure it whenever it resets.
Again, as with most MIBs, it is implementation-specific how a system
provides and manages such persistence. To speculate, one could
imagine, for example, that persistence depended on the context in
which the expression was configured, or perhaps system-specific
characteristics of the expression's owner. Or perhaps everything in
a MIB such as this one, which is clearly aimed at persistent
configuration, is automatically part of a system's other persistent
configuration.
Expires December 2003 [Page 7]
Internet Draft Distributed Management Event MIB 13 June 2003
6. Security
Security of Event MIB entries depends on SNMPv3 access control for
the entire MIB or for subsets based on entry owner names.
Security of monitored objects for remote access depends on the
Management Target MIB [RFC2573]. Security for local access can
depend on the Management Target MIB or on recording appropriate
security credentials of the creator of an entry and using those to
access the local objects. These security credentials are the
parameters necessary as inputs to isAccessAllowed from the
Architecture for Describing SNMP Management Frameworks. When
accessing local objects without using a local target tag, the system
MUST (conceptually) use isAccessAllowed to ensure that it does not
violate security.
To facilitate the provisioning of access control by a security
administrator for this MIB itself using the View-Based Access Control
Model (VACM) defined in RFC 2275 [RFC2575] for tables in which
multiple users may need to independently create or modify entries,
the initial index is used as an "owner index". Such an initial index
has a syntax of SnmpAdminString, and can thus be trivially mapped to
a securityName or groupName as defined in VACM, in accordance with a
security policy.
If a security administrator were to employ such an approach, all
entries in related tables belonging to a particular user will have
the same value for this initial index. For a given user's entries in
a particular table, the object identifiers for the information in
these entries will have the same sub-identifiers (except for the
"column" sub-identifier) up to the end of the encoded owner index.
To configure VACM to permit access to this portion of the table, one
would create vacmViewTreeFamilyTable entries with the value of
vacmViewTreeFamilySubtree including the owner index portion, and
vacmViewTreeFamilyMask "wildcarding" the column sub-identifier. More
elaborate configurations are possible.
7. Definitions
DISMAN-EVENT-MIB DEFINITIONS ::= BEGIN
IMPORTS
MODULE-IDENTITY, OBJECT-TYPE,
Integer32, Unsigned32,
NOTIFICATION-TYPE, Counter32,
Expires December 2003 [Page 8]
Internet Draft Distributed Management Event MIB 13 June 2003
Gauge32, mib-2, zeroDotZero FROM SNMPv2-SMI
TEXTUAL-CONVENTION, RowStatus,
TruthValue FROM SNMPv2-TC
MODULE-COMPLIANCE, OBJECT-GROUP,
NOTIFICATION-GROUP FROM SNMPv2-CONF
sysUpTime FROM SNMPv2-MIB
SnmpTagValue FROM SNMP-TARGET-MIB
SnmpAdminString FROM SNMP-FRAMEWORK-MIB;
dismanEventMIB MODULE-IDENTITY
LAST-UPDATED "200306130000Z" -- 13 June 2003
ORGANIZATION "IETF Distributed Management Working Group"
CONTACT-INFO "Ramanathan Kavasseri
Cisco Systems, Inc.
170 West Tasman Drive,
San Jose CA 95134-1706.
Phone: +1 408 526 4527
Email: ramk@cisco.com"
DESCRIPTION
"The MIB module for defining event triggers and actions
for network management purposes.
Copyright (C) The Internet Society 2003. This version of this
MIB module is part of RFC yyyy; see the RFC itself for full
legal notices."
-- RFC Ed.: replace yyyy with actual RFC number & remove this note
-- Revision History
REVISION "200306130000Z" -- 13 June 2003
DESCRIPTION "Added copyright statement to the MIB module
description."
REVISION "200111140000Z" -- 14 November 2001
DESCRIPTION "Updated the DESCRIPTION clauses of
mteEventEntryStatus,
mteTriggerEnabled and mteTriggerEntryStatus."
REVISION "200010160000Z" -- 16 October 2000
DESCRIPTION "This is the initial version of this MIB.
Published as RFC 2981"
::= { mib-2 88 }
dismanEventMIBObjects OBJECT IDENTIFIER ::= { dismanEventMIB 1 }
-- Management Triggered Event (MTE) objects
mteResource OBJECT IDENTIFIER ::= { dismanEventMIBObjects 1 }
Expires December 2003 [Page 9]
Internet Draft Distributed Management Event MIB 13 June 2003
mteTrigger OBJECT IDENTIFIER ::= { dismanEventMIBObjects 2 }
mteObjects OBJECT IDENTIFIER ::= { dismanEventMIBObjects 3 }
mteEvent OBJECT IDENTIFIER ::= { dismanEventMIBObjects 4 }
--
-- Textual Conventions
--
FailureReason ::= TEXTUAL-CONVENTION
STATUS current
DESCRIPTION
"Reasons for failures in an attempt to perform a management
request.
The first group of errors, numbered less than 0, are related
to problems in sending the request. The existence of a
particular error code here does not imply that all
implementations are capable of sensing that error and
returning that code.
The second group, numbered greater than 0, are copied
directly from SNMP protocol operations and are intended to
carry exactly the meanings defined for the protocol as returned
in an SNMP response.
localResourceLack some local resource such as memory
lacking or
mteResourceSampleInstanceMaximum
exceeded
badDestination unrecognized domain name or otherwise
invalid destination address
destinationUnreachable can't get to destination address
noResponse no response to SNMP request
badType the data syntax of a retrieved object
as not as expected
sampleOverrun another sample attempt occurred before
the previous one completed"
SYNTAX INTEGER { localResourceLack(-1),
badDestination(-2),
destinationUnreachable(-3),
noResponse(-4),
badType(-5),
sampleOverrun(-6),
Expires December 2003 [Page 10]
Internet Draft Distributed Management Event MIB 13 June 2003
noError(0),
tooBig(1),
noSuchName(2),
badValue(3),
readOnly(4),
genErr(5),
noAccess(6),
wrongType(7),
wrongLength(8),
wrongEncoding(9),
wrongValue(10),
noCreation(11),
inconsistentValue(12),
resourceUnavailable(13),
commitFailed(14),
undoFailed(15),
authorizationError(16),
notWritable(17),
inconsistentName(18) }
--
-- Resource Control Section
--
mteResourceSampleMinimum OBJECT-TYPE
SYNTAX Integer32 (1..2147483647)
UNITS "seconds"
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The minimum mteTriggerFrequency this system will
accept. A system may use the larger values of this minimum to
lessen the impact of constant sampling. For larger
sampling intervals the system samples less often and
suffers less overhead. This object provides a way to enforce
such lower overhead for all triggers created after it is
set.
Unless explicitly resource limited, a system's value for
this object SHOULD be 1, allowing as small as a 1 second
interval for ongoing trigger sampling.
Changing this value will not invalidate an existing setting
of mteTriggerFrequency."
::= { mteResource 1 }
Expires December 2003 [Page 11]
Internet Draft Distributed Management Event MIB 13 June 2003
mteResourceSampleInstanceMaximum OBJECT-TYPE
SYNTAX Unsigned32
UNITS "instances"
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The maximum number of instance entries this system will
support for sampling.
These are the entries that maintain state, one for each
instance of each sampled object as selected by
mteTriggerValueID. Note that wildcarded objects result
in multiple instances of this state.
A value of 0 indicates no preset limit, that is, the limit
is dynamic based on system operation and resources.
Unless explicitly resource limited, a system's value for
this object SHOULD be 0.
Changing this value will not eliminate or inhibit existing
sample state but could prevent allocation of additional state
information."
::= { mteResource 2 }
mteResourceSampleInstances OBJECT-TYPE
SYNTAX Gauge32
UNITS "instances"
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of currently active instance entries as
defined for mteResourceSampleInstanceMaximum."
::= { mteResource 3 }
mteResourceSampleInstancesHigh OBJECT-TYPE
SYNTAX Gauge32
UNITS "instances"
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The highest value of mteResourceSampleInstances that has
occurred since initialization of the management system."
::= { mteResource 4 }
Expires December 2003 [Page 12]
Internet Draft Distributed Management Event MIB 13 June 2003
mteResourceSampleInstanceLacks OBJECT-TYPE
SYNTAX Counter32
UNITS "instances"
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of times this system could not take a new sample
because that allocation would have exceeded the limit set by
mteResourceSampleInstanceMaximum."
::= { mteResource 5 }
--
-- Trigger Section
--
-- Counters
mteTriggerFailures OBJECT-TYPE
SYNTAX Counter32
UNITS "failures"
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of times an attempt to check for a trigger
condition has failed. This counts individually for each
attempt in a group of targets or each attempt for a
wildcarded object."
::= { mteTrigger 1 }
--
-- Trigger Table
--
mteTriggerTable OBJECT-TYPE
SYNTAX SEQUENCE OF MteTriggerEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"A table of management event trigger information."
::= { mteTrigger 2 }
mteTriggerEntry OBJECT-TYPE
SYNTAX MteTriggerEntry
MAX-ACCESS not-accessible
STATUS current
Expires December 2003 [Page 13]
Internet Draft Distributed Management Event MIB 13 June 2003
DESCRIPTION
"Information about a single trigger. Applications create and
delete entries using mteTriggerEntryStatus."
INDEX { mteOwner, IMPLIED mteTriggerName }
::= { mteTriggerTable 1 }
MteTriggerEntry ::= SEQUENCE {
mteOwner SnmpAdminString,
mteTriggerName SnmpAdminString,
mteTriggerComment SnmpAdminString,
mteTriggerTest BITS,
mteTriggerSampleType INTEGER,
mteTriggerValueID OBJECT IDENTIFIER,
mteTriggerValueIDWildcard TruthValue,
mteTriggerTargetTag SnmpTagValue,
mteTriggerContextName SnmpAdminString,
mteTriggerContextNameWildcard TruthValue,
mteTriggerFrequency Unsigned32,
mteTriggerObjectsOwner SnmpAdminString,
mteTriggerObjects SnmpAdminString,
mteTriggerEnabled TruthValue,
mteTriggerEntryStatus RowStatus,
mteTriggerEntryStorageType StorageType
}
mteOwner OBJECT-TYPE
SYNTAX SnmpAdminString (SIZE(0..32))
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The owner of this entry. The exact semantics of this
string are subject to the security policy defined by the
security administrator."
::= { mteTriggerEntry 1 }
mteTriggerName OBJECT-TYPE
SYNTAX SnmpAdminString (SIZE (1..32))
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"A locally-unique, administratively assigned name for the
trigger within the scope of mteOwner."
::= { mteTriggerEntry 2 }
mteTriggerComment OBJECT-TYPE
Expires December 2003 [Page 14]
Internet Draft Distributed Management Event MIB 13 June 2003
SYNTAX SnmpAdminString
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"A description of the trigger's function and use."
DEFVAL { ''H }
::= { mteTriggerEntry 3 }
mteTriggerTest OBJECT-TYPE
SYNTAX BITS { existence(0), boolean(1), threshold(2) }
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"The type of trigger test to perform. For 'boolean' and
'threshold' tests, the object at mteTriggerValueID MUST
evaluate to an integer, that is, anything that ends up encoded
for transmission (that is, in BER, not ASN.1) as an integer.
For 'existence', the specific test is as selected by
mteTriggerExistenceTest. When an object appears, vanishes
or changes value, the trigger fires. If the object's
appearance caused the trigger firing, the object MUST
vanish before the trigger can be fired again for it, and
vice versa. If the trigger fired due to a change in the
object's value, it will be fired again on every successive
value change for that object.
For 'boolean', the specific test is as selected by
mteTriggerBooleanTest. If the test result is true the trigger
fires. The trigger will not fire again until the value has
become false and come back to true.
For 'threshold' the test works as described below for
mteTriggerThresholdStartup, mteTriggerThresholdRising, and
mteTriggerThresholdFalling.
Note that combining 'boolean' and 'threshold' tests on the
same object may be somewhat redundant."
DEFVAL { { boolean } }
::= { mteTriggerEntry 4 }
mteTriggerSampleType OBJECT-TYPE
SYNTAX INTEGER { absoluteValue(1), deltaValue(2) }
MAX-ACCESS read-create
STATUS current
Expires December 2003 [Page 15]
Internet Draft Distributed Management Event MIB 13 June 2003
DESCRIPTION
"The type of sampling to perform.
An 'absoluteValue' sample requires only a single sample to be
meaningful, and is exactly the value of the object at
mteTriggerValueID at the sample time.
A 'deltaValue' requires two samples to be meaningful and is
thus not available for testing until the second and subsequent
samples after the object at mteTriggerValueID is first found
to exist. It is the difference between the two samples. For
unsigned values it is always positive, based on unsigned
arithmetic. For signed values it can be positive or negative.
For SNMP counters to be meaningful they should be sampled as a
'deltaValue'.
For 'deltaValue' mteTriggerDeltaTable contains further
parameters.
If only 'existence' is set in mteTriggerTest this object has
no meaning."
DEFVAL { absoluteValue }
::= { mteTriggerEntry 5 }
mteTriggerValueID OBJECT-TYPE
SYNTAX OBJECT IDENTIFIER
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"The object identifier of the MIB object to sample to see
if the trigger should fire.
This may be wildcarded by truncating all or part of the
instance portion, in which case the value is obtained
as if with a GetNext function, checking multiple values
if they exist. If such wildcarding is applied,
mteTriggerValueIDWildcard must be 'true' and if not it must
be 'false'.
Bad object identifiers or a mismatch between truncating the
identifier and the value of mteTriggerValueIDWildcard result
in operation as one would expect when providing the wrong
identifier to a Get or GetNext operation. The Get will fail
or get the wrong object. The GetNext will indeed get whatever
Expires December 2003 [Page 16]
Internet Draft Distributed Management Event MIB 13 June 2003
is next, proceeding until it runs past the initial part of the
identifier and perhaps many unintended objects for confusing
results. If the value syntax of those objects is not usable,
that results in a 'badType' error that terminates the scan.
Each instance that fills the wildcard is independent of any
additional instances, that is, wildcarded objects operate
as if there were a separate table entry for each instance
that fills the wildcard without having to actually predict
all possible instances ahead of time."
DEFVAL { zeroDotZero }
::= { mteTriggerEntry 6 }
mteTriggerValueIDWildcard OBJECT-TYPE
SYNTAX TruthValue
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"Control for whether mteTriggerValueID is to be treated as
fully-specified or wildcarded, with 'true' indicating wildcard."
DEFVAL { false }
::= { mteTriggerEntry 7 }
mteTriggerTargetTag OBJECT-TYPE
SYNTAX SnmpTagValue
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"The tag for the target(s) from which to obtain the condition
for a trigger check.
A length of 0 indicates the local system. In this case,
access to the objects indicated by mteTriggerValueID is under
the security credentials of the requester that set
mteTriggerEntryStatus to 'active'. Those credentials are the
input parameters for isAccessAllowed from the Architecture for
Describing SNMP Management Frameworks.
Otherwise access rights are checked according to the security
parameters resulting from the tag."
DEFVAL { ''H }
::= { mteTriggerEntry 8 }
mteTriggerContextName OBJECT-TYPE
SYNTAX SnmpAdminString
Expires December 2003 [Page 17]
Internet Draft Distributed Management Event MIB 13 June 2003
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"The management context from which to obtain mteTriggerValueID.
This may be wildcarded by leaving characters off the end. For
example use 'Repeater' to wildcard to 'Repeater1',
'Repeater2', 'Repeater-999.87b', and so on. To indicate such
wildcarding is intended, mteTriggerContextNameWildcard must
be 'true'.
Each instance that fills the wildcard is independent of any
additional instances, that is, wildcarded objects operate
as if there were a separate table entry for each instance
that fills the wildcard without having to actually predict
all possible instances ahead of time.
Operation of this feature assumes that the local system has a
list of available contexts against which to apply the
wildcard. If the objects are being read from the local
system, this is clearly the system's own list of contexts.
For a remote system a local version of such a list is not
defined by any current standard and may not be available, so
this function MAY not be supported."
DEFVAL { ''H }
::= { mteTriggerEntry 9 }
mteTriggerContextNameWildcard OBJECT-TYPE
SYNTAX TruthValue
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"Control for whether mteTriggerContextName is to be treated as
fully-specified or wildcarded, with 'true' indicating wildcard."
DEFVAL { false }
::= { mteTriggerEntry 10 }
mteTriggerFrequency OBJECT-TYPE
SYNTAX Unsigned32
UNITS "seconds"
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"The number of seconds to wait between trigger samples. To
encourage consistency in sampling, the interval is measured
Expires December 2003 [Page 18]
Internet Draft Distributed Management Event MIB 13 June 2003
from the beginning of one check to the beginning of the next
and the timer is restarted immediately when it expires, not
when the check completes.
If the next sample begins before the previous one completed the
system may either attempt to make the check or treat this as an
error condition with the error 'sampleOverrun'.
A frequency of 0 indicates instantaneous recognition of the
condition. This is not possible in many cases, but may
be supported in cases where it makes sense and the system is
able to do so. This feature allows the MIB to be used in
implementations where such interrupt-driven behavior is
possible and is not likely to be supported for all MIB objects
even then since such sampling generally has to be tightly
integrated into low-level code.
Systems that can support this SHOULD document those cases
where it can be used. In cases where it can not, setting this
object to 0 should be disallowed."
DEFVAL { 600 }
::= { mteTriggerEntry 11 }
mteTriggerObjectsOwner OBJECT-TYPE
SYNTAX SnmpAdminString (SIZE (0..32))
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"To go with mteTriggerObjects, the mteOwner of a group of
objects from mteObjectsTable."
DEFVAL { ''H }
::= { mteTriggerEntry 12 }
mteTriggerObjects OBJECT-TYPE
SYNTAX SnmpAdminString (SIZE (0..32))
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"The mteObjectsName of a group of objects from
mteObjectsTable. These objects are to be added to any
Notification resulting from the firing of this trigger.
A list of objects may also be added based on the event or on
the value of mteTriggerTest.
Expires December 2003 [Page 19]
Internet Draft Distributed Management Event MIB 13 June 2003
A length of 0 indicates no additional objects."
DEFVAL { ''H }
::= { mteTriggerEntry 13 }
mteTriggerEnabled OBJECT-TYPE
SYNTAX TruthValue
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"A control to allow a trigger to be configured but not used.
When the value is 'false' the trigger is not sampled.
Whenever the value goes from 'false' to 'true', the trigger
is treated as being initialized. That is, no history is kept
of any trigger sample values from previous times when this
control may have been enabled.
If this object is set to 'true' when its value
is already 'true', the operation has no effect;
that is, the trigger is not re-initialized, and
there is no error."
DEFVAL { false }
::= { mteTriggerEntry 14 }
mteTriggerEntryStatus OBJECT-TYPE
SYNTAX RowStatus
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"The control that allows creation and deletion of entries.
Once made active an entry may not be modified except to
modify the value of mteTriggerEnabled or to delete the
entry."
::= { mteTriggerEntry 15 }
mteTriggerEntryStorageType OBJECT-TYPE
SYNTAX StorageType
MAX-ACCESS read-create
STATUS current
DESCRIPTION "The storage type for this conceptual row.
Conceptual rows having the value 'permanent' need not
allow write-access to any columnar objects in the row,
except for mteTriggerEnabled.
"
DEFVAL { nonVolatile }
Expires December 2003 [Page 20]
Internet Draft Distributed Management Event MIB 13 June 2003
::= { mteTriggerEntry 16 }
--
-- Trigger Delta Table
--
mteTriggerDeltaTable OBJECT-TYPE
SYNTAX SEQUENCE OF MteTriggerDeltaEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"A table of management event trigger information for delta
sampling."
::= { mteTrigger 3 }
mteTriggerDeltaEntry OBJECT-TYPE
SYNTAX MteTriggerDeltaEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Information about a single trigger's delta sampling. Entries
automatically exist in this this table for each mteTriggerEntry
that has mteTriggerSampleType set to 'deltaValue'."
INDEX { mteOwner, IMPLIED mteTriggerName }
::= { mteTriggerDeltaTable 1 }
MteTriggerDeltaEntry ::= SEQUENCE {
mteTriggerDeltaDiscontinuityID OBJECT IDENTIFIER,
mteTriggerDeltaDiscontinuityIDWildcard TruthValue,
mteTriggerDeltaDiscontinuityIDType INTEGER
}
sysUpTimeInstance OBJECT IDENTIFIER ::= { sysUpTime 0 }
mteTriggerDeltaDiscontinuityID OBJECT-TYPE
SYNTAX OBJECT IDENTIFIER
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The OBJECT IDENTIFIER (OID) of a TimeTicks, TimeStamp, or
DateAndTime object that indicates a discontinuity in the value
at mteTriggerValueID.
The OID may be for a leaf object (e.g. sysUpTime.0) or may
be wildcarded to match mteTriggerValueID.
Expires December 2003 [Page 21]
Internet Draft Distributed Management Event MIB 13 June 2003
This object supports normal checking for a discontinuity in a
counter. Note that if this object does not point to sysUpTime
discontinuity checking MUST still check sysUpTime for an overall
discontinuity.
If the object identified is not accessible the sample attempt
is in error, with the error code as from an SNMP request.
Bad object identifiers or a mismatch between truncating the
identifier and the value of mteDeltaDiscontinuityIDWildcard
result in operation as one would expect when providing the
wrong identifier to a Get operation. The Get will fail or get
the wrong object. If the value syntax of those objects is not
usable, that results in an error that terminates the sample
with a 'badType' error code."
DEFVAL { sysUpTimeInstance }
::= { mteTriggerDeltaEntry 1 }
mteTriggerDeltaDiscontinuityIDWildcard OBJECT-TYPE
SYNTAX TruthValue
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Control for whether mteTriggerDeltaDiscontinuityID is to be
treated as fully-specified or wildcarded, with 'true'
indicating wildcard. Note that the value of this object will
be the same as that of the corresponding instance of
mteTriggerValueIDWildcard when the corresponding
mteTriggerSampleType is 'deltaValue'."
DEFVAL { false }
::= { mteTriggerDeltaEntry 2 }
mteTriggerDeltaDiscontinuityIDType OBJECT-TYPE
SYNTAX INTEGER { timeTicks(1), timeStamp(2), dateAndTime(3) }
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The value 'timeTicks' indicates the
mteTriggerDeltaDiscontinuityID of this row is of syntax
TimeTicks. The value 'timeStamp' indicates syntax TimeStamp.
The value 'dateAndTime' indicates syntax DateAndTime."
DEFVAL { timeTicks }
::= { mteTriggerDeltaEntry 3 }
--
Expires December 2003 [Page 22]
Internet Draft Distributed Management Event MIB 13 June 2003
-- Trigger Existence Table
--
mteTriggerExistenceTable OBJECT-TYPE
SYNTAX SEQUENCE OF MteTriggerExistenceEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"A table of management event trigger information for existence
triggers."
::= { mteTrigger 4 }
mteTriggerExistenceEntry OBJECT-TYPE
SYNTAX MteTriggerExistenceEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Information about a single existence trigger. Entries
automatically exist in this this table for each mteTriggerEntry
that has 'existence' set in mteTriggerTest."
INDEX { mteOwner, IMPLIED mteTriggerName }
::= { mteTriggerExistenceTable 1 }
MteTriggerExistenceEntry ::= SEQUENCE {
mteTriggerExistenceTest BITS,
mteTriggerExistenceStartup BITS,
mteTriggerExistenceObjectsOwner SnmpAdminString,
mteTriggerExistenceObjects SnmpAdminString,
mteTriggerExistenceEventOwner SnmpAdminString,
mteTriggerExistenceEvent SnmpAdminString
}
mteTriggerExistenceTest OBJECT-TYPE
SYNTAX BITS { present(0), absent(1), changed(2) }
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The type of existence test to perform. The trigger fires
when the object at mteTriggerValueID is seen to go from
present to absent, from absent to present, or to have it's
value changed, depending on which tests are selected:
present(0) - when this test is selected, the trigger fires
when the mteTriggerValueID object goes from absent to present.
Expires December 2003 [Page 23]
Internet Draft Distributed Management Event MIB 13 June 2003
absent(1) - when this test is selected, the trigger fires
when the mteTriggerValueID object goes from present to absent.
changed(2) - when this test is selected, the trigger fires
the mteTriggerValueID object value changes.
Once the trigger has fired for either presence or absence it
will not fire again for that state until the object has been
to the other state. "
DEFVAL { { present, absent } }
::= { mteTriggerExistenceEntry 1 }
mteTriggerExistenceStartup OBJECT-TYPE
SYNTAX BITS { present(0), absent(1) }
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Control for whether an event may be triggered when this entry
is first set to 'active' and the test specified by
mteTriggerExistenceTest is true. Setting an option causes
that trigger to fire when its test is true."
DEFVAL { { present, absent } }
::= { mteTriggerExistenceEntry 2 }
mteTriggerExistenceObjectsOwner OBJECT-TYPE
SYNTAX SnmpAdminString (SIZE (0..32))
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"To go with mteTriggerExistenceObjects, the mteOwner of a
group of objects from mteObjectsTable."
DEFVAL { ''H }
::= { mteTriggerExistenceEntry 3 }
mteTriggerExistenceObjects OBJECT-TYPE
SYNTAX SnmpAdminString (SIZE (0..32))
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The mteObjectsName of a group of objects from
mteObjectsTable. These objects are to be added to any
Notification resulting from the firing of this trigger for
this test.
A list of objects may also be added based on the overall
trigger, the event or other settings in mteTriggerTest.
Expires December 2003 [Page 24]
Internet Draft Distributed Management Event MIB 13 June 2003
A length of 0 indicates no additional objects."
DEFVAL { ''H }
::= { mteTriggerExistenceEntry 4 }
mteTriggerExistenceEventOwner OBJECT-TYPE
SYNTAX SnmpAdminString (SIZE (0..32))
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"To go with mteTriggerExistenceEvent, the mteOwner of an event
entry from the mteEventTable."
DEFVAL { ''H }
::= { mteTriggerExistenceEntry 5 }
mteTriggerExistenceEvent OBJECT-TYPE
SYNTAX SnmpAdminString (SIZE (0..32))
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The mteEventName of the event to invoke when mteTriggerType is
'existence' and this trigger fires. A length of 0 indicates no
event."
DEFVAL { ''H }
::= { mteTriggerExistenceEntry 6 }
--
-- Trigger Boolean Table
--
mteTriggerBooleanTable OBJECT-TYPE
SYNTAX SEQUENCE OF MteTriggerBooleanEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"A table of management event trigger information for boolean
triggers."
::= { mteTrigger 5 }
mteTriggerBooleanEntry OBJECT-TYPE
SYNTAX MteTriggerBooleanEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Information about a single boolean trigger. Entries
automatically exist in this this table for each mteTriggerEntry
Expires December 2003 [Page 25]
Internet Draft Distributed Management Event MIB 13 June 2003
that has 'boolean' set in mteTriggerTest."
INDEX { mteOwner, IMPLIED mteTriggerName }
::= { mteTriggerBooleanTable 1 }
MteTriggerBooleanEntry ::= SEQUENCE {
mteTriggerBooleanComparison INTEGER,
mteTriggerBooleanValue Integer32,
mteTriggerBooleanStartup TruthValue,
mteTriggerBooleanObjectsOwner SnmpAdminString,
mteTriggerBooleanObjects SnmpAdminString,
mteTriggerBooleanEventOwner SnmpAdminString,
mteTriggerBooleanEvent SnmpAdminString
}
mteTriggerBooleanComparison OBJECT-TYPE
SYNTAX INTEGER { unequal(1), equal(2),
less(3), lessOrEqual(4),
greater(5), greaterOrEqual(6) }
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The type of boolean comparison to perform.
The value at mteTriggerValueID is compared to
mteTriggerBooleanValue, so for example if
mteTriggerBooleanComparison is 'less' the result would be true
if the value at mteTriggerValueID is less than the value of
mteTriggerBooleanValue."
DEFVAL { unequal }
::= { mteTriggerBooleanEntry 1 }
mteTriggerBooleanValue OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The value to use for the test specified by
mteTriggerBooleanTest."
DEFVAL { 0 }
::= { mteTriggerBooleanEntry 2 }
mteTriggerBooleanStartup OBJECT-TYPE
SYNTAX TruthValue
MAX-ACCESS read-write
STATUS current
Expires December 2003 [Page 26]
Internet Draft Distributed Management Event MIB 13 June 2003
DESCRIPTION
"Control for whether an event may be triggered when this entry
is first set to 'active' or a new instance of the object at
mteTriggerValueID is found and the test specified by
mteTriggerBooleanComparison is true. In that case an event is
triggered if mteTriggerBooleanStartup is 'true'."
DEFVAL { true }
::= { mteTriggerBooleanEntry 3 }
mteTriggerBooleanObjectsOwner OBJECT-TYPE
SYNTAX SnmpAdminString (SIZE (0..32))
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"To go with mteTriggerBooleanObjects, the mteOwner of a group
of objects from mteObjectsTable."
DEFVAL { ''H }
::= { mteTriggerBooleanEntry 4 }
mteTriggerBooleanObjects OBJECT-TYPE
SYNTAX SnmpAdminString (SIZE (0..32))
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The mteObjectsName of a group of objects from
mteObjectsTable. These objects are to be added to any
Notification resulting from the firing of this trigger for
this test.
A list of objects may also be added based on the overall
trigger, the event or other settings in mteTriggerTest.
A length of 0 indicates no additional objects."
DEFVAL { ''H }
::= { mteTriggerBooleanEntry 5 }
mteTriggerBooleanEventOwner OBJECT-TYPE
SYNTAX SnmpAdminString (SIZE (0..32))
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"To go with mteTriggerBooleanEvent, the mteOwner of an event
entry from mteEventTable."
DEFVAL { ''H }
::= { mteTriggerBooleanEntry 6 }
Expires December 2003 [Page 27]
Internet Draft Distributed Management Event MIB 13 June 2003
mteTriggerBooleanEvent OBJECT-TYPE
SYNTAX SnmpAdminString (SIZE (0..32))
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The mteEventName of the event to invoke when mteTriggerType is
'boolean' and this trigger fires. A length of 0 indicates no
event."
DEFVAL { ''H }
::= { mteTriggerBooleanEntry 7 }
--
-- Trigger Threshold Table
--
mteTriggerThresholdTable OBJECT-TYPE
SYNTAX SEQUENCE OF MteTriggerThresholdEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"A table of management event trigger information for threshold
triggers."
::= { mteTrigger 6 }
mteTriggerThresholdEntry OBJECT-TYPE
SYNTAX MteTriggerThresholdEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Information about a single threshold trigger. Entries
automatically exist in this table for each mteTriggerEntry
that has 'threshold' set in mteTriggerTest."
INDEX { mteOwner, IMPLIED mteTriggerName }
::= { mteTriggerThresholdTable 1 }
MteTriggerThresholdEntry ::= SEQUENCE {
mteTriggerThresholdStartup INTEGER,
mteTriggerThresholdRising Integer32,
mteTriggerThresholdFalling Integer32,
mteTriggerThresholdDeltaRising Integer32,
mteTriggerThresholdDeltaFalling Integer32,
mteTriggerThresholdObjectsOwner SnmpAdminString,
mteTriggerThresholdObjects SnmpAdminString,
mteTriggerThresholdRisingEventOwner SnmpAdminString,
mteTriggerThresholdRisingEvent SnmpAdminString,
Expires December 2003 [Page 28]
Internet Draft Distributed Management Event MIB 13 June 2003
mteTriggerThresholdFallingEventOwner SnmpAdminString,
mteTriggerThresholdFallingEvent SnmpAdminString,
mteTriggerThresholdDeltaRisingEventOwner SnmpAdminString,
mteTriggerThresholdDeltaRisingEvent SnmpAdminString,
mteTriggerThresholdDeltaFallingEventOwner SnmpAdminString,
mteTriggerThresholdDeltaFallingEvent SnmpAdminString
}
mteTriggerThresholdStartup OBJECT-TYPE
SYNTAX INTEGER { rising(1), falling(2), risingOrFalling(3) }
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The event that may be triggered when this entry is first
set to 'active' and a new instance of the object at
mteTriggerValueID is found. If the first sample after this
instance becomes active is greater than or equal to
mteTriggerThresholdRising and mteTriggerThresholdStartup is
equal to 'rising' or 'risingOrFalling', then one
mteTriggerThresholdRisingEvent is triggered for that instance.
If the first sample after this entry becomes active is less
than or equal to mteTriggerThresholdFalling and
mteTriggerThresholdStartup is equal to 'falling' or
'risingOrFalling', then one mteTriggerThresholdRisingEvent is
triggered for that instance."
DEFVAL { risingOrFalling }
::= { mteTriggerThresholdEntry 1 }
mteTriggerThresholdRising OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"A threshold value to check against if mteTriggerType is
'threshold'.
When the current sampled value is greater than or equal to
this threshold, and the value at the last sampling interval
was less than this threshold, one
mteTriggerThresholdRisingEvent is triggered. That event is
also triggered if the first sample after this entry becomes
active is greater than or equal to this threshold and
mteTriggerThresholdStartup is equal to 'rising' or
'risingOrFalling'.
Expires December 2003 [Page 29]
Internet Draft Distributed Management Event MIB 13 June 2003
After a rising event is generated, another such event is not
triggered until the sampled value falls below this threshold
and reaches mteTriggerThresholdFalling."
DEFVAL { 0 }
::= { mteTriggerThresholdEntry 2 }
mteTriggerThresholdFalling OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"A threshold value to check against if mteTriggerType is
'threshold'.
When the current sampled value is less than or equal to this
threshold, and the value at the last sampling interval was
greater than this threshold, one
mteTriggerThresholdFallingEvent is triggered. That event is
also triggered if the first sample after this entry becomes
active is less than or equal to this threshold and
mteTriggerThresholdStartup is equal to 'falling' or
'risingOrFalling'.
After a falling event is generated, another such event is not
triggered until the sampled value rises above this threshold
and reaches mteTriggerThresholdRising."
DEFVAL { 0 }
::= { mteTriggerThresholdEntry 3 }
mteTriggerThresholdDeltaRising OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"A threshold value to check against if mteTriggerType is
'threshold'.
When the delta value (difference) between the current sampled
value (value(n)) and the previous sampled value (value(n-1))
is greater than or equal to this threshold,
and the delta value calculated at the last sampling interval
(i.e. value(n-1) - value(n-2)) was less than this threshold,
one mteTriggerThresholdDeltaRisingEvent is triggered. That event
is also triggered if the first delta value calculated after this
entry becomes active, i.e. value(2) - value(1), where value(1)
Expires December 2003 [Page 30]
Internet Draft Distributed Management Event MIB 13 June 2003
is the first sample taken of that instance, is greater than or
equal to this threshold.
After a rising event is generated, another such event is not
triggered until the delta value falls below this threshold and
reaches mteTriggerThresholdDeltaFalling."
DEFVAL { 0 }
::= { mteTriggerThresholdEntry 4 }
mteTriggerThresholdDeltaFalling OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"A threshold value to check against if mteTriggerType is
'threshold'.
When the delta value (difference) between the current sampled
value (value(n)) and the previous sampled value (value(n-1))
is less than or equal to this threshold,
and the delta value calculated at the last sampling interval
(i.e. value(n-1) - value(n-2)) was greater than this threshold,
one mteTriggerThresholdDeltaFallingEvent is triggered. That event
is also triggered if the first delta value calculated after this
entry becomes active, i.e. value(2) - value(1), where value(1)
is the first sample taken of that instance, is less than or
equal to this threshold.
After a falling event is generated, another such event is not
triggered until the delta value falls below this threshold and
reaches mteTriggerThresholdDeltaRising."
DEFVAL { 0 }
::= { mteTriggerThresholdEntry 5 }
mteTriggerThresholdObjectsOwner OBJECT-TYPE
SYNTAX SnmpAdminString (SIZE (0..32))
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"To go with mteTriggerThresholdObjects, the mteOwner of a group
of objects from mteObjectsTable."
DEFVAL { ''H }
::= { mteTriggerThresholdEntry 6 }
mteTriggerThresholdObjects OBJECT-TYPE
Expires December 2003 [Page 31]
Internet Draft Distributed Management Event MIB 13 June 2003
SYNTAX SnmpAdminString (SIZE (0..32))
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The mteObjectsName of a group of objects from
mteObjectsTable. These objects are to be added to any
Notification resulting from the firing of this trigger for
this test.
A list of objects may also be added based on the overall
trigger, the event or other settings in mteTriggerTest.
A length of 0 indicates no additional objects."
DEFVAL { ''H }
::= { mteTriggerThresholdEntry 7 }
mteTriggerThresholdRisingEventOwner OBJECT-TYPE
SYNTAX SnmpAdminString (SIZE (0..32))
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"To go with mteTriggerThresholdRisingEvent, the mteOwner of an
event entry from mteEventTable."
DEFVAL { ''H }
::= { mteTriggerThresholdEntry 8 }
mteTriggerThresholdRisingEvent OBJECT-TYPE
SYNTAX SnmpAdminString (SIZE (0..32))
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The mteEventName of the event to invoke when mteTriggerType is
'threshold' and this trigger fires based on
mteTriggerThresholdRising. A length of 0 indicates no event."
DEFVAL { ''H }
::= { mteTriggerThresholdEntry 9 }
mteTriggerThresholdFallingEventOwner OBJECT-TYPE
SYNTAX SnmpAdminString (SIZE (0..32))
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"To go with mteTriggerThresholdFallingEvent, the mteOwner of an
event entry from mteEventTable."
DEFVAL { ''H }
Expires December 2003 [Page 32]
Internet Draft Distributed Management Event MIB 13 June 2003
::= { mteTriggerThresholdEntry 10 }
mteTriggerThresholdFallingEvent OBJECT-TYPE
SYNTAX SnmpAdminString (SIZE (0..32))
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The mteEventName of the event to invoke when mteTriggerType is
'threshold' and this trigger fires based on
mteTriggerThresholdFalling. A length of 0 indicates no event."
DEFVAL { ''H }
::= { mteTriggerThresholdEntry 11 }
mteTriggerThresholdDeltaRisingEventOwner OBJECT-TYPE
SYNTAX SnmpAdminString (SIZE (0..32))
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"To go with mteTriggerThresholdDeltaRisingEvent, the mteOwner
of an event entry from mteEventTable."
DEFVAL { ''H }
::= { mteTriggerThresholdEntry 12 }
mteTriggerThresholdDeltaRisingEvent OBJECT-TYPE
SYNTAX SnmpAdminString (SIZE (0..32))
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The mteEventName of the event to invoke when mteTriggerType is
'threshold' and this trigger fires based on
mteTriggerThresholdDeltaRising. A length of 0 indicates
no event."
DEFVAL { ''H }
::= { mteTriggerThresholdEntry 13 }
mteTriggerThresholdDeltaFallingEventOwner OBJECT-TYPE
SYNTAX SnmpAdminString (SIZE (0..32))
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"To go with mteTriggerThresholdDeltaFallingEvent, the mteOwner
of an event entry from mteEventTable."
DEFVAL { ''H }
::= { mteTriggerThresholdEntry 14 }
Expires December 2003 [Page 33]
Internet Draft Distributed Management Event MIB 13 June 2003
mteTriggerThresholdDeltaFallingEvent OBJECT-TYPE
SYNTAX SnmpAdminString (SIZE (0..32))
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The mteEventName of the event to invoke when mteTriggerType is
'threshold' and this trigger fires based on
mteTriggerThresholdDeltaFalling. A length of 0 indicates
no event."
DEFVAL { ''H }
::= { mteTriggerThresholdEntry 15 }
--
-- Objects Table
--
mteObjectsTable OBJECT-TYPE
SYNTAX SEQUENCE OF MteObjectsEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"A table of objects that can be added to notifications based
on the trigger, trigger test, or event, as pointed to by
entries in those tables."
::= { mteObjects 1 }
mteObjectsEntry OBJECT-TYPE
SYNTAX MteObjectsEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"A group of objects. Applications create and delete entries
using mteObjectsEntryStatus.
When adding objects to a notification they are added in the
lexical order of their index in this table. Those associated
with a trigger come first, then trigger test, then event."
INDEX { mteOwner, mteObjectsName, mteObjectsIndex }
::= { mteObjectsTable 1 }
MteObjectsEntry ::= SEQUENCE {
mteObjectsName SnmpAdminString,
mteObjectsIndex Unsigned32,
mteObjectsID OBJECT IDENTIFIER,
mteObjectsIDWildcard TruthValue,
Expires December 2003 [Page 34]
Internet Draft Distributed Management Event MIB 13 June 2003
mteObjectsEntryStatus RowStatus,
mteObjectsEntryStorageType Storagetype
}
mteObjectsName OBJECT-TYPE
SYNTAX SnmpAdminString (SIZE (1..32))
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"A locally-unique, administratively assigned name for a group
of objects."
::= { mteObjectsEntry 1 }
mteObjectsIndex OBJECT-TYPE
SYNTAX Unsigned32 (1..4294967295)
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"An arbitrary integer for the purpose of identifying
individual objects within a mteObjectsName group.
Objects within a group are placed in the notification in the
numerical order of this index.
Groups are placed in the notification in the order of the
selections for overall trigger, trigger test, and event.
Within trigger test they are in the same order as the
numerical values of the bits defined for mteTriggerTest.
Bad object identifiers or a mismatch between truncating the
identifier and the value of mteDeltaDiscontinuityIDWildcard
result in operation as one would expect when providing the
wrong identifier to a Get operation. The Get will fail or get
the wrong object. If the object is not available it is omitted
from the notification."
::= { mteObjectsEntry 2 }
mteObjectsID OBJECT-TYPE
SYNTAX OBJECT IDENTIFIER
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"The object identifier of a MIB object to add to a
Notification that results from the firing of a trigger.
Expires December 2003 [Page 35]
Internet Draft Distributed Management Event MIB 13 June 2003
This may be wildcarded by truncating all or part of the
instance portion, in which case the instance portion of the
OID for obtaining this object will be the same as that used
in obtaining the mteTriggerValueID that fired. If such
wildcarding is applied, mteObjectsIDWildcard must be
'true' and if not it must be 'false'.
Each instance that fills the wildcard is independent of any
additional instances, that is, wildcarded objects operate
as if there were a separate table entry for each instance
that fills the wildcard without having to actually predict
all possible instances ahead of time."
DEFVAL { zeroDotZero }
::= { mteObjectsEntry 3 }
mteObjectsIDWildcard OBJECT-TYPE
SYNTAX TruthValue
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"Control for whether mteObjectsID is to be treated as
fully-specified or wildcarded, with 'true' indicating wildcard."
DEFVAL { false }
::= { mteObjectsEntry 4 }
mteObjectsEntryStatus OBJECT-TYPE
SYNTAX RowStatus
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"The control that allows creation and deletion of entries.
Once made active an entry MAY not be modified except to
delete it."
::= { mteObjectsEntry 5 }
mteObjectsEntryStorageType OBJECT-TYPE
SYNTAX StorageType
MAX-ACCESS read-create
STATUS current
DESCRIPTION "The storage type for this conceptual row.
Conceptual rows having the value 'permanent' need not
allow write-access to any columnar objects in the row.
"
DEFVAL { nonVolatile }
::= { mteObectsEntry 6 }
Expires December 2003 [Page 36]
Internet Draft Distributed Management Event MIB 13 June 2003
--
-- Event Section
--
-- Counters
mteEventFailures OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of times an attempt to invoke an event
has failed. This counts individually for each
attempt in a group of targets or each attempt for a
wildcarded trigger object."
::= { mteEvent 1 }
--
-- Event Table
--
mteEventTable OBJECT-TYPE
SYNTAX SEQUENCE OF MteEventEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"A table of management event action information."
::= { mteEvent 2 }
mteEventEntry OBJECT-TYPE
SYNTAX MteEventEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Information about a single event. Applications create and
delete entries using mteEventEntryStatus."
INDEX { mteOwner, IMPLIED mteEventName }
::= { mteEventTable 1 }
MteEventEntry ::= SEQUENCE {
mteEventName SnmpAdminString,
mteEventComment SnmpAdminString,
mteEventActions BITS,
mteEventEnabled TruthValue,
mteEventEntryStatus RowStatus,
Expires December 2003 [Page 37]
Internet Draft Distributed Management Event MIB 13 June 2003
mteEventEntryStorageType StorageType
}
mteEventName OBJECT-TYPE
SYNTAX SnmpAdminString (SIZE (1..32))
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"A locally-unique, administratively assigned name for the
event."
::= { mteEventEntry 1 }
mteEventComment OBJECT-TYPE
SYNTAX SnmpAdminString
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"A description of the event's function and use."
DEFVAL { ''H }
::= { mteEventEntry 2 }
mteEventActions OBJECT-TYPE
SYNTAX BITS { notification(0), set(1) }
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"The actions to perform when this event occurs.
For 'notification', Traps and/or Informs are sent according
to the configuration in the SNMP Notification MIB.
For 'set', an SNMP Set operation is performed according to
control values in this entry."
DEFVAL { {} } -- No bits set.
::= { mteEventEntry 3 }
mteEventEnabled OBJECT-TYPE
SYNTAX TruthValue
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"A control to allow an event to be configured but not used.
When the value is 'false' the event does not execute even if
triggered."
DEFVAL { false }
Expires December 2003 [Page 38]
Internet Draft Distributed Management Event MIB 13 June 2003
::= { mteEventEntry 4 }
mteEventEntryStatus OBJECT-TYPE
SYNTAX RowStatus
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"The control that allows creation and deletion of entries.
Once made active an entry MAY not be modified except to
modify the value of mteEventEnabled or to delete the entry."
::= { mteEventEntry 5 }
mteEventEntryStorageType OBJECT-TYPE
SYNTAX StorageType
MAX-ACCESS read-create
STATUS current
DESCRIPTION "The storage type for this conceptual row.
Conceptual rows having the value 'permanent' need not
allow write-access to any columnar objects in the row.
"
DEFVAL { nonVolatile }
::= { mteEventEntry 6 }
--
-- Event Notification Table
--
mteEventNotificationTable OBJECT-TYPE
SYNTAX SEQUENCE OF MteEventNotificationEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"A table of information about notifications to be sent as a
consequence of management events."
::= { mteEvent 3 }
mteEventNotificationEntry OBJECT-TYPE
SYNTAX MteEventNotificationEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Information about a single event's notification. Entries
automatically exist in this this table for each mteEventEntry
that has 'notification' set in mteEventActions."
Expires December 2003 [Page 39]
Internet Draft Distributed Management Event MIB 13 June 2003
INDEX { mteOwner, IMPLIED mteEventName }
::= { mteEventNotificationTable 1 }
MteEventNotificationEntry ::= SEQUENCE {
mteEventNotification OBJECT IDENTIFIER,
mteEventNotificationObjectsOwner SnmpAdminString,
mteEventNotificationObjects SnmpAdminString
}
mteEventNotification OBJECT-TYPE
SYNTAX OBJECT IDENTIFIER
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The object identifier from the NOTIFICATION-TYPE for the
notification to use if mteEventActions has 'notification' set."
DEFVAL { zeroDotZero }
::= { mteEventNotificationEntry 1 }
mteEventNotificationObjectsOwner OBJECT-TYPE
SYNTAX SnmpAdminString (SIZE (0..32))
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"To go with mteEventNotificationObjects, the mteOwner of a
group of objects from mteObjectsTable."
DEFVAL { ''H }
::= { mteEventNotificationEntry 2 }
mteEventNotificationObjects OBJECT-TYPE
SYNTAX SnmpAdminString (SIZE (0..32))
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The mteObjectsName of a group of objects from
mteObjectsTable if mteEventActions has 'notification' set.
These objects are to be added to any Notification generated by
this event.
Objects may also be added based on the trigger that stimulated
the event.
A length of 0 indicates no additional objects."
DEFVAL { ''H }
::= { mteEventNotificationEntry 3 }
Expires December 2003 [Page 40]
Internet Draft Distributed Management Event MIB 13 June 2003
--
-- Event Set Table
--
mteEventSetTable OBJECT-TYPE
SYNTAX SEQUENCE OF MteEventSetEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"A table of management event action information."
::= { mteEvent 4 }
mteEventSetEntry OBJECT-TYPE
SYNTAX MteEventSetEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Information about a single event's set option. Entries
automatically exist in this this table for each mteEventEntry
that has 'set' set in mteEventActions."
INDEX { mteOwner, IMPLIED mteEventName }
::= { mteEventSetTable 1 }
MteEventSetEntry ::= SEQUENCE {
mteEventSetObject OBJECT IDENTIFIER,
mteEventSetObjectWildcard TruthValue,
mteEventSetValue Integer32,
mteEventSetTargetTag SnmpTagValue,
mteEventSetContextName SnmpAdminString,
mteEventSetContextNameWildcard TruthValue
}
mteEventSetObject OBJECT-TYPE
SYNTAX OBJECT IDENTIFIER
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The object identifier from the MIB object to set if
mteEventActions has 'set' set.
This object identifier may be wildcarded by leaving
sub-identifiers off the end, in which case
nteEventSetObjectWildCard must be 'true'.
If mteEventSetObject is wildcarded the instance used to set the
Expires December 2003 [Page 41]
Internet Draft Distributed Management Event MIB 13 June 2003
object to which it points is the same as the instance from the
value of mteTriggerValueID that triggered the event.
Each instance that fills the wildcard is independent of any
additional instances, that is, wildcarded objects operate
as if there were a separate table entry for each instance
that fills the wildcard without having to actually predict
all possible instances ahead of time.
Bad object identifiers or a mismatch between truncating the
identifier and the value of mteSetObjectWildcard
result in operation as one would expect when providing the
wrong identifier to a Set operation. The Set will fail or set
the wrong object. If the value syntax of the destination
object is not correct, the Set fails with the normal SNMP
error code."
DEFVAL { zeroDotZero }
::= { mteEventSetEntry 1 }
mteEventSetObjectWildcard OBJECT-TYPE
SYNTAX TruthValue
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Control over whether mteEventSetObject is to be treated as
fully-specified or wildcarded, with 'true' indicating wildcard
if mteEventActions has 'set' set."
DEFVAL { false }
::= { mteEventSetEntry 2 }
mteEventSetValue OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The value to which to set the object at mteEventSetObject
if mteEventActions has 'set' set."
DEFVAL { 0 }
::= { mteEventSetEntry 3 }
mteEventSetTargetTag OBJECT-TYPE
SYNTAX SnmpTagValue
MAX-ACCESS read-write
STATUS current
DESCRIPTION
Expires December 2003 [Page 42]
Internet Draft Distributed Management Event MIB 13 June 2003
"The tag for the target(s) at which to set the object at
mteEventSetObject to mteEventSetValue if mteEventActions
has 'set' set.
Systems limited to self management MAY reject a non-zero
length for the value of this object.
A length of 0 indicates the local system. In this case,
access to the objects indicated by mteEventSetObject is under
the security credentials of the requester that set
mteTriggerEntryStatus to 'active'. Those credentials are the
input parameters for isAccessAllowed from the Architecture for
Describing SNMP Management Frameworks.
Otherwise access rights are checked according to the security
parameters resulting from the tag."
DEFVAL { ''H }
::= { mteEventSetEntry 4 }
mteEventSetContextName OBJECT-TYPE
SYNTAX SnmpAdminString
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The management context in which to set mteEventObjectID.
if mteEventActions has 'set' set.
This may be wildcarded by leaving characters off the end. To
indicate such wildcarding mteEventSetContextNameWildcard must
be 'true'.
If this context name is wildcarded the value used to complete
the wildcarding of mteTriggerContextName will be appended."
DEFVAL { ''H }
::= { mteEventSetEntry 5 }
mteEventSetContextNameWildcard OBJECT-TYPE
SYNTAX TruthValue
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Control for whether mteEventSetContextName is to be treated as
fully-specified or wildcarded, with 'true' indicating wildcard
if mteEventActions has 'set' set."
DEFVAL { false }
Expires December 2003 [Page 43]
Internet Draft Distributed Management Event MIB 13 June 2003
::= { mteEventSetEntry 6 }
--
-- Notifications
--
dismanEventMIBNotificationPrefix OBJECT IDENTIFIER ::=
{ dismanEventMIB 2 }
dismanEventMIBNotifications OBJECT IDENTIFIER ::=
{ dismanEventMIBNotificationPrefix 0 }
dismanEventMIBNotificationObjects OBJECT IDENTIFIER
::= { dismanEventMIBNotificationPrefix 1 }
--
-- Notification Objects
--
mteHotTrigger OBJECT-TYPE
SYNTAX SnmpAdminString
MAX-ACCESS accessible-for-notify
STATUS current
DESCRIPTION
"The name of the trigger causing the notification."
::= { dismanEventMIBNotificationObjects 1 }
mteHotTargetName OBJECT-TYPE
SYNTAX SnmpAdminString
MAX-ACCESS accessible-for-notify
STATUS current
DESCRIPTION
"The SNMP Target MIB's snmpTargetAddrName related to the
notification."
::= { dismanEventMIBNotificationObjects 2 }
mteHotContextName OBJECT-TYPE
SYNTAX SnmpAdminString
MAX-ACCESS accessible-for-notify
STATUS current
DESCRIPTION
"The context name related to the notification. This MUST be as
fully-qualified as possible, including filling in wildcard
information determined in processing."
::= { dismanEventMIBNotificationObjects 3 }
mteHotOID OBJECT-TYPE
Expires December 2003 [Page 44]
Internet Draft Distributed Management Event MIB 13 June 2003
SYNTAX OBJECT IDENTIFIER
MAX-ACCESS accessible-for-notify
STATUS current
DESCRIPTION
"The object identifier of the destination object related to the
notification. This MUST be as fully-qualified as possible,
including filling in wildcard information determined in
processing.
For a trigger-related notification this is from
mteTriggerValueID.
For a set failure this is from mteEventSetObject."
::= { dismanEventMIBNotificationObjects 4 }
mteHotValue OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS accessible-for-notify
STATUS current
DESCRIPTION
"The value of the object at mteTriggerValueID when a
trigger fired."
::= { dismanEventMIBNotificationObjects 5 }
mteFailedReason OBJECT-TYPE
SYNTAX FailureReason
MAX-ACCESS accessible-for-notify
STATUS current
DESCRIPTION
"The reason for the failure of an attempt to check for a
trigger condition or set an object in response to an event."
::= { dismanEventMIBNotificationObjects 6 }
--
-- Notifications
--
mteTriggerFired NOTIFICATION-TYPE
OBJECTS { mteHotTrigger,
mteHotTargetName,
mteHotContextName,
mteHotOID,
mteHotValue }
STATUS current
DESCRIPTION
Expires December 2003 [Page 45]
Internet Draft Distributed Management Event MIB 13 June 2003
"Notification that the trigger indicated by the object
instances has fired, for triggers with mteTriggerType
'boolean' or 'existence'."
::= { dismanEventMIBNotifications 1 }
mteTriggerRising NOTIFICATION-TYPE
OBJECTS { mteHotTrigger,
mteHotTargetName,
mteHotContextName,
mteHotOID,
mteHotValue }
STATUS current
DESCRIPTION
"Notification that the rising threshold was met for triggers
with mteTriggerType 'threshold'."
::= { dismanEventMIBNotifications 2 }
mteTriggerFalling NOTIFICATION-TYPE
OBJECTS { mteHotTrigger,
mteHotTargetName,
mteHotContextName,
mteHotOID,
mteHotValue }
STATUS current
DESCRIPTION
"Notification that the falling threshold was met for triggers
with mteTriggerType 'threshold'."
::= { dismanEventMIBNotifications 3 }
mteTriggerFailure NOTIFICATION-TYPE
OBJECTS { mteHotTrigger,
mteHotTargetName,
mteHotContextName,
mteHotOID,
mteFailedReason }
STATUS current
DESCRIPTION
"Notification that an attempt to check a trigger has failed.
The network manager must enable this notification only with
a certain fear and trembling, as it can easily crowd out more
important information. It should be used only to help diagnose
a problem that has appeared in the error counters and can not
be found otherwise."
::= { dismanEventMIBNotifications 4 }
Expires December 2003 [Page 46]
Internet Draft Distributed Management Event MIB 13 June 2003
mteEventSetFailure NOTIFICATION-TYPE
OBJECTS { mteHotTrigger,
mteHotTargetName,
mteHotContextName,
mteHotOID,
mteFailedReason }
STATUS current
DESCRIPTION
"Notification that an attempt to do a set in response to an
event has failed.
The network manager must enable this notification only with
a certain fear and trembling, as it can easily crowd out more
important information. It should be used only to help diagnose
a problem that has appeared in the error counters and can not
be found otherwise."
::= { dismanEventMIBNotifications 5 }
--
-- Conformance
--
dismanEventMIBConformance OBJECT IDENTIFIER ::= { dismanEventMIB 3 }
dismanEventMIBCompliances OBJECT IDENTIFIER ::=
{ dismanEventMIBConformance 1 }
dismanEventMIBGroups OBJECT IDENTIFIER ::=
{ dismanEventMIBConformance 2 }
-- Compliance
dismanEventMIBCompliance MODULE-COMPLIANCE
STATUS current
DESCRIPTION
"The compliance statement for entities which implement
the Event MIB."
MODULE -- this module
MANDATORY-GROUPS {
dismanEventResourceGroup,
dismanEventTriggerGroup,
dismanEventObjectsGroup,
dismanEventEventGroup,
dismanEventNotificationObjectGroup,
dismanEventNotificationGroup
}
Expires December 2003 [Page 47]
Internet Draft Distributed Management Event MIB 13 June 2003
OBJECT mteTriggerTargetTag
MIN-ACCESS read-only
DESCRIPTION
"Write access is not required, thus limiting
monitoring to the local system or pre-configured
remote systems."
OBJECT mteEventSetTargetTag
MIN-ACCESS read-only
DESCRIPTION
"Write access is not required, thus limiting
setting to the local system or pre-configured
remote systems."
OBJECT mteTriggerValueIDWildcard
MIN-ACCESS read-only
DESCRIPTION
"Write access is not required, thus allowing
the system not to implement wildcarding."
OBJECT mteTriggerContextNameWildcard
MIN-ACCESS read-only
DESCRIPTION
"Write access is not required, thus allowing
the system not to implement wildcarding."
OBJECT mteObjectsIDWildcard
MIN-ACCESS read-only
DESCRIPTION
"Write access is not required, thus allowing
the system not to implement wildcarding."
OBJECT mteEventSetContextNameWildcard
MIN-ACCESS read-only
DESCRIPTION
"Write access is not required, thus allowing
the system not to implement wildcarding."
::= { dismanEventMIBCompliances 1 }
-- Units of Conformance
dismanEventResourceGroup OBJECT-GROUP
OBJECTS {
Expires December 2003 [Page 48]
Internet Draft Distributed Management Event MIB 13 June 2003
mteResourceSampleMinimum,
mteResourceSampleInstanceMaximum,
mteResourceSampleInstances,
mteResourceSampleInstancesHigh,
mteResourceSampleInstanceLacks
}
STATUS current
DESCRIPTION
"Event resource status and control objects."
::= { dismanEventMIBGroups 1 }
dismanEventTriggerGroup OBJECT-GROUP
OBJECTS {
mteTriggerFailures,
mteTriggerComment,
mteTriggerTest,
mteTriggerSampleType,
mteTriggerValueID,
mteTriggerValueIDWildcard,
mteTriggerTargetTag,
mteTriggerContextName,
mteTriggerContextNameWildcard,
mteTriggerFrequency,
mteTriggerObjectsOwner,
mteTriggerObjects,
mteTriggerEnabled,
mteTriggerEntryStatus,
mteTriggerDeltaDiscontinuityID,
mteTriggerDeltaDiscontinuityIDWildcard,
mteTriggerDeltaDiscontinuityIDType,
mteTriggerExistenceTest,
mteTriggerExistenceStartup,
mteTriggerExistenceObjectsOwner,
mteTriggerExistenceObjects,
mteTriggerExistenceEventOwner,
mteTriggerExistenceEvent,
mteTriggerBooleanComparison,
mteTriggerBooleanValue,
mteTriggerBooleanStartup,
mteTriggerBooleanObjectsOwner,
mteTriggerBooleanObjects,
mteTriggerBooleanEventOwner,
Expires December 2003 [Page 49]
Internet Draft Distributed Management Event MIB 13 June 2003
mteTriggerBooleanEvent,
mteTriggerThresholdStartup,
mteTriggerThresholdObjectsOwner,
mteTriggerThresholdObjects,
mteTriggerThresholdRising,
mteTriggerThresholdFalling,
mteTriggerThresholdDeltaRising,
mteTriggerThresholdDeltaFalling,
mteTriggerThresholdRisingEventOwner,
mteTriggerThresholdRisingEvent,
mteTriggerThresholdFallingEventOwner,
mteTriggerThresholdFallingEvent,
mteTriggerThresholdDeltaRisingEventOwner,
mteTriggerThresholdDeltaRisingEvent,
mteTriggerThresholdDeltaFallingEventOwner,
mteTriggerThresholdDeltaFallingEvent
}
STATUS current
DESCRIPTION
"Event triggers."
::= { dismanEventMIBGroups 2 }
dismanEventObjectsGroup OBJECT-GROUP
OBJECTS {
mteObjectsID,
mteObjectsIDWildcard,
mteObjectsEntryStatus
}
STATUS current
DESCRIPTION
"Supplemental objects."
::= { dismanEventMIBGroups 3 }
dismanEventEventGroup OBJECT-GROUP
OBJECTS {
mteEventFailures,
mteEventComment,
mteEventActions,
mteEventEnabled,
mteEventEntryStatus,
mteEventNotification,
mteEventNotificationObjectsOwner,
Expires December 2003 [Page 50]
Internet Draft Distributed Management Event MIB 13 June 2003
mteEventNotificationObjects,
mteEventSetObject,
mteEventSetObjectWildcard,
mteEventSetValue,
mteEventSetTargetTag,
mteEventSetContextName,
mteEventSetContextNameWildcard
}
STATUS current
DESCRIPTION
"Events."
::= { dismanEventMIBGroups 4 }
dismanEventNotificationObjectGroup OBJECT-GROUP
OBJECTS {
mteHotTrigger,
mteHotTargetName,
mteHotContextName,
mteHotOID,
mteHotValue,
mteFailedReason
}
STATUS current
DESCRIPTION
"Notification objects."
::= { dismanEventMIBGroups 5 }
dismanEventNotificationGroup NOTIFICATION-GROUP
NOTIFICATIONS {
mteTriggerFired,
mteTriggerRising,
mteTriggerFalling,
mteTriggerFailure,
mteEventSetFailure
}
STATUS current
DESCRIPTION
"Notifications."
::= { dismanEventMIBGroups 6 }
END
Expires December 2003 [Page 51]
Internet Draft Distributed Management Event MIB 13 June 2003
8. Intellectual Property
The IETF takes no position regarding the validity or scope of any
intellectual property or other rights that might be claimed to
pertain to the implementation or use of the technology described in
this document or the extent to which any license under such rights
might or might not be available; neither does it represent that it
has made any effort to identify any such rights. Information on the
IETF's procedures with respect to rights in standards-track and
standards- related documentation can be found in BCP-11. Copies of
claims of rights made available for publication and any assurances of
licenses to be made available, or the result of an attempt made to
obtain a general license or permission for the use of such
proprietary rights by implementors or users of this specification can
be obtained from the IETF Secretariat.
The IETF invites any interested party to bring to its attention any
copyrights, patents or patent applications, or other proprietary
rights which may cover technology that may be required to practice
this standard. Please address the information to the IETF Executive
Director.
9. Acknowledgements
This MIB contains considerable contributions from the RMON MIB, the
Distributed Management Design Team (Andy Bierman, Maria Greene, Bob
Stewart, and Steve Waldbusser), the Distributed Management Working
Group, and colleagues at Cisco.
10. References
[RFC2571] Harrington, D., Presuhn, R. and B. Wijnen, "An
Architecture for Describing SNMP Management Frameworks",
RFC 2571, April 1999.
[RFC1155] Rose, M. and K. McCloghrie, "Structure and Identification
of Management Information for TCP/IP-based Internets",
STD 16, RFC 1155, May 1990.
[RFC1212] Rose, M. and K. McCloghrie, "Concise MIB Definitions",
STD 16, RFC 1212, March 1991.
[RFC1215] Rose, M., "A Convention for Defining Traps for use with
the SNMP", RFC 1215, March 1991.
Expires December 2003 [Page 52]
Internet Draft Distributed Management Event MIB 13 June 2003
[RFC2578] McCloghrie, K., Perkins, D., Schoenwaelder, J., Case, J.,
Rose, M. and S. Waldbusser, "Structure of Management
Information Version 2 (SMIv2)", STD 58, RFC 2578, April
1999.
[RFC2579] McCloghrie, K., Perkins, D., Schoenwaelder, J., Case, J.,
Rose, M. and S. Waldbusser, "Textual Conventions for
SMIv2", STD 58, RFC 2579, April 1999.
[RFC2580] McCloghrie, K., Perkins, D., Schoenwaelder, J., Case, J.,
Rose, M. and S. Waldbusser, "Conformance Statements for
SMIv2", STD 58, RFC 2580, April 1999.
[RFC1157] Case, J., Fedor, M., Schoffstall, M. and J. Davin,
"Simple Network Management Protocol", STD 15, RFC 1157,
May 1990.
[RFC1901] Case, J., McCloghrie, K., Rose, M. and S. Waldbusser,
"Introduction to Community-based SNMPv2", RFC 1901,
January 1996.
[RFC1906] Case, J., McCloghrie, K., Rose, M. and S. Waldbusser,
"Transport Mappings for Version 2 of the Simple Network
Management Protocol (SNMPv2)", RFC 1906, January 1996.
[RFC2572] Case, J., Harrington D., Presuhn R. and B. Wijnen,
"Message Processing and Dispatching for the Simple
Network Management Protocol (SNMP)", RFC 2572, April
1999.
[RFC2574] Blumenthal, U. and B. Wijnen, "User-based Security Model
(USM) for version 3 of the Simple Network Management
Protocol (SNMPv3)", RFC 2574, April 1999.
[RFC1905] Case, J., McCloghrie, K., Rose, M. and S. Waldbusser,
"Protocol Operations for Version 2 of the Simple Network
Management Protocol (SNMPv2)", RFC 1905, January 1996.
[RFC2573] Levi, D., Meyer, P. and B. Stewart, "SNMPv3
Applications", RFC 2573, April 1999.
[RFC2575] Wijnen, B., Presuhn, R. and K. McCloghrie, "View-based
Access Control Model (VACM) for the Simple Network
Management Protocol (SNMP)", RFC 2575, April 1999.
Expires December 2003 [Page 53]
Internet Draft Distributed Management Event MIB 13 June 2003
[RFC2570] Case, J., Mundy, R., Partain, D. and B. Stewart,
"Introduction to Version 3 of the Internet-standard
Network Management Framework", RFC 2570, April 1999.
[RFC1903] Case, J., McCloghrie, K., Rose, M. and S. Waldbusser,
"Coexistence between Version 1 and version 2 of the
Internet-standard Network Management Framework", RFC
1903, January 1996.
[RFC2981] Stewart, B., "Event MIB", RFC 2981, October 2000.
[RFC1757] Waldbusser, S., "Remote Network Monitoring Management
Information Base", RFC 1757, February 1995.
[RFC1451] Case, J., McCloghrie, K., Rose, M. and S. Waldbusser,
"Manager-to- Manager Management Information Base", RFC
1451, April 1993.
[RFC2982] Stewart, B., "Distributed Management Expression MIB", RFC
2982, October 2000.
[LOG-MIB] Stewart, B., "Notification Log MIB", Work in Progress.
11. Security Considerations
Security issues are discussed in the Security section and in the
DESCRIPTION clauses of relevant objects.
12. Author's Address
Bob Stewart
Cisco Systems, Inc.
170 West Tasman Drive
San Jose, CA 95134-1706
U.S.A.
13. Editor's Address
Ramanathan Kavasseri
Cisco Systems, Inc.
170 West Tasman Drive
San Jose, CA 95134-1706
U.S.A.
Expires December 2003 [Page 54]
Internet Draft Distributed Management Event MIB 13 June 2003
Phone: +1 408 527 2446
EMail: ramk@cisco.com
Expires December 2003 [Page 55]
Internet Draft Distributed Management Event MIB 13 June 2003
14. Full Copyright Statement
Copyright (C) The Internet Society (2003). All Rights Reserved.
This document and translations of it may be copied and furnished to
others, and derivative works that comment on or otherwise explain it
or assist in its implementation may be prepared, copied, published
and distributed, in whole or in part, without restriction of any
kind, provided that the above copyright notice and this paragraph are
included on all such copies and derivative works. However, this
document itself may not be modified in any way, such as by removing
the copyright notice or references to the Internet Society or other
Internet organizations, except as needed for the purpose of
developing Internet standards in which case the procedures for
copyrights defined in the Internet Standards process must be
followed, or as required to translate it into languages other than
English.
The limited permissions granted above are perpetual and will not be
revoked by the Internet Society or its successors or assigns.
This document and the information contained herein is provided on an
"AS IS" basis and THE INTERNET SOCIETY AND THE INTERNET ENGINEERING
TASK FORCE DISCLAIMS ALL WARRANTIES, EXPRESS OR IMPLIED, INCLUDING
BUT NOT LIMITED TO ANY WARRANTY THAT THE USE OF THE INFORMATION
HEREIN WILL NOT INFRINGE ANY RIGHTS OR ANY IMPLIED WARRANTIES OF
MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE.
Expires December 2003 [Page 56]
- [Disman] Please accept draft-ietf-disman-event-mi… Ramanathan Kavasseri