RE: [Hubmib] RE: [EFM] Performance monitoring, installation, trouble shooting .

"Romascanu, Dan (Dan)" <dromasca@avaya.com> Mon, 18 February 2002 06:59 UTC

Received: from optimus.ietf.org (ietf.org [132.151.1.19] (may be forged)) by ietf.org (8.9.1a/8.9.1a) with ESMTP id BAA19728 for <hubmib-archive@odin.ietf.org>; Mon, 18 Feb 2002 01:59:28 -0500 (EST)
Received: from optimus.ietf.org (localhost [127.0.0.1]) by optimus.ietf.org (8.9.1a/8.9.1) with ESMTP id BAA01662; Mon, 18 Feb 2002 01:52:40 -0500 (EST)
Received: from ietf.org (odin [132.151.1.176]) by optimus.ietf.org (8.9.1a/8.9.1) with ESMTP id BAA01598 for <hubmib@optimus.ietf.org>; Mon, 18 Feb 2002 01:52:38 -0500 (EST)
Received: from iere.net.avaya.com (iere.net.avaya.com [198.152.12.101]) by ietf.org (8.9.1a/8.9.1a) with ESMTP id BAA19650; Mon, 18 Feb 2002 01:52:34 -0500 (EST)
Received: from iere.net.avaya.com (localhost [127.0.0.1]) by iere.net.avaya.com (8.11.2/8.9.3) with ESMTP id g1I6pD728059; Mon, 18 Feb 2002 01:51:13 -0500 (EST)
Received: from IS0004AVEXU1.global.avaya.com (h149-49-38-91.avaya.com [149.49.38.91]) by iere.net.avaya.com (8.11.2/8.9.3) with ESMTP id g1I6pCc28053; Mon, 18 Feb 2002 01:51:13 -0500 (EST)
content-class: urn:content-classes:message
Subject: RE: [Hubmib] RE: [EFM] Performance monitoring, installation, trouble shooting .
MIME-Version: 1.0
Content-Type: text/plain; charset="iso-8859-1"
Date: Mon, 18 Feb 2002 08:51:09 +0200
X-MimeOLE: Produced By Microsoft Exchange V6.0.4712.0
Message-ID: <AAB4B3D3CF0F454F98272CBE187FDE2F60D0C6@IS0004AVEXU1.global.avaya.com>
Thread-Topic: [Hubmib] RE: [EFM] Performance monitoring, installation, trouble shooting .
Thread-Index: AcG35qJhjiltHJLDR7WreEhGsvti+AAXv3oQ
From: "Romascanu, Dan (Dan)" <dromasca@avaya.com>
To: Andrew Smith <ah_smith@acm.org>, hubmib@ietf.org, ifmib@ietf.org
Cc: mattsquire@acm.org
Content-Transfer-Encoding: 8bit
X-MIME-Autoconverted: from quoted-printable to 8bit by optimus.ietf.org id BAA01599
Sender: hubmib-admin@ietf.org
Errors-To: hubmib-admin@ietf.org
X-Mailman-Version: 1.0
Precedence: bulk
List-Id: <hubmib.ietf.org>
X-BeenThere: hubmib@ietf.org
Content-Transfer-Encoding: 8bit

The statement in RFC 2665 refers at the work that was being done at that
time (around 1998-99) in the Interfaces MIB (ifmib) WG. The assessment
of the editors of the Ethernet-like interfaces MIB was that if a more
generic interface test MIB will be defined, there is no need for an
Ethernet-specific interface test table.

The ifTest table is deprecated in the latest version of the Interfaces
MIB successor - RFC 2663. The editor of the Ethernet-like MIB should
correct the text referred by Andy in the new revision of the MIB
occasioned by the 10GBE support.

AFAIK, there is no replacement for ifTest. Actually the definition of
ifTest was generic enough for 'strange un-SNMP-like things'. I do not
remember all discussions that led to the deprecation of ifTest table,
but the lack of implementation reports might have been part of this.

I do think that there is a need for such a function. Still, I prefer it
to be generic, and not Ethernet-specific. If there is a broader
interest, ifmib is IMO the place to (re)-do it.

Regards,

Dan
 

> -----Original Message-----
> From: Andrew Smith [mailto:ah_smith@acm.org]
> Sent: Sunday, February 17, 2002 9:38 PM
> To: hubmib@ietf.org
> Cc: mattsquire@acm.org
> Subject: [Hubmib] RE: [EFM] Performance monitoring, 
> installation, trouble shooting .
> 
> 
> Forgive my ignorance on the history of the following 
> statement in RFC2665:
> 
> "Note that the ifTestTable is now deprecated.  Work is underway to
>    define a replacement MIB for system and interface testing.  It is
>    expected that the tests defined in this document will be usable in
>    this replacement MIB."
> 
> The "Ethernet in the First Mile" group in IEEE 802.3 is looking at
> requirements for management; specific requirements are for 
> the minimisation
> of "truck-rolls" (see message thread below - it talks about a 
> PHY-level
> loopback requirement). Has there been any further work on 
> this in any IETF
> WG? Was the ifTest stuff thrown out because it might do 
> strange un-SNMP-like
> things like cut off connectivity for some (arbitrary? 
> predetermined?) period
> of time?
> 
> Could someone fill me in on the history here?
> 
> Thanks,
> 
> Andrew Smith
> 
> 
> 
> -----Original Message-----
> From: owner-stds-802-3-efm@majordomo.ieee.org
> [mailto:owner-stds-802-3-efm@majordomo.ieee.org]On Behalf Of 
> Matt Squire
> Sent: Sunday, February 17, 2002 8:43 AM
> To: Roy Bynum
> Cc: kmccammon@tri.sbc.com; stds-802-3-efm@ieee.org
> Subject: Re: [EFM] Performance monitoring, installation, trouble
> shooting .
> 
> 
> 
> 
> I'll repeat the current status of loopback within OAM.
> - A ping connectivity test is a requirement.
> - A loopback mode is a requirement.
> - Controlling the state of the loopback mode at the other end 
> of a link
> is a requirement.
> 
> There is also a group of people that believe that the functionality of
> loopback can be achieved without a loopback mode, but 
> enhancing the MIBS
> and the PHY functionality.  They are actively investigating the
> possibility.  When and if they think they can show equivalent
> functionality, the results will be presented to the 
> reflector.  At that
> point everyone can judge whether the alternate method provides
> equivalent function.
> 
> Loopback itself is a function.  The function is used to 
> fulfill certain
> operational requirements.  If those requirements can be met with other
> methods, and this point can be provent to the group as whole 
> (including
> Kent), then the other methods deserve consideration.  I don't 
> think this
> is in any way conflicts with Kent's statement (though I'm sure he'll
> correct me if I'm wrong).
> 
> Loopback will remain a requirement until someone can prove to the OAM
> group that there is a better way.
> 
> - Matt
> 
> 
> Roy Bynum wrote:
> >
> > Kent,
> >
> > I have found that if you do not use strong enough language, 
> the vendors
> > that may not have what you require, will attempt to 
> "interpret" your words
> > so that they can mean something totally different than what you
> > intended.  If I am correct, you may want to resend your 
> comment and use
> the
> > words "our operations requires that ability".  If you check 
> with your
> > equipment "certification" people for edge access 
> infrastructure, you may
> > find that loop back functionality at the physical layer is a hard
> > requirement, just like it is on T1/T3 infrastructure today. 
>  I know that
> it
> > was a requirement the large service provider that I was 
> previously with.
> >
> > Thank you,
> > Roy Bynum
> >
> > At 04:18 PM 2/15/2002 -0800, kmccammon@tri.sbc.com wrote:
> >
> > >Bob,
> > >Loopback functionality is important for SBC, our 
> operations need that
> > >ability.
> > >-Kent
> > >
> > >Kent G. McCammon
> > >Broadband Access Group
> > >SBC Technology Resources, Inc
> > >4698 Willow Road
> > >Pleasanton, CA 94588
> > >925-598-1246
> > >kmccammon@tri.sbc.com
> > >
> 
> 
> _______________________________________________
> Hubmib mailing list
> Hubmib@ietf.org
> https://www1.ietf.org/mailman/listinfo/hubmib
> 

_______________________________________________
Hubmib mailing list
Hubmib@ietf.org
https://www1.ietf.org/mailman/listinfo/hubmib