I-D Action: draft-palle-pce-stateful-pce-initiated-p2mp-lsp-03.txt

internet-drafts@ietf.org Fri, 04 July 2014 10:53 UTC

MIME-Version: 1.0
Content-Type: text/plain; charset="utf-8"
Content-Transfer-Encoding: 7bit
From: internet-drafts@ietf.org
To: i-d-announce@ietf.org
Subject: I-D Action: draft-palle-pce-stateful-pce-initiated-p2mp-lsp-03.txt
Auto-Submitted: auto-generated
Precedence: bulk
Message-ID: <20140704105303.27739.66371.idtracker@ietfa.amsl.com>
Date: Fri, 04 Jul 2014 03:53:03 -0700
Archived-At: http://mailarchive.ietf.org/arch/msg/i-d-announce/sLIYBPxBYR3s5T2wq0Lyl9mAQkw
Reply-To: internet-drafts@ietf.org

A New Internet-Draft is available from the on-line Internet-Drafts directories.


        Title           : PCEP Extensions for PCE-initiated Point-to-Multipoint LSP Setup in a Stateful PCE Model
        Authors         : Udayasree Palle
                          Dhruv Dhody
                          Yosuke Tanaka
                          Yuji Kamite
                          Zafar Ali
	Filename        : draft-palle-pce-stateful-pce-initiated-p2mp-lsp-03.txt
	Pages           : 12
	Date            : 2014-07-04

Abstract:
   The Path Computation Element (PCE) has been identified as an
   appropriate technology for the determination of the paths of point-
   to-multipoint (P2MP) TE LSPs.  The extensions described in
   [I-D.ietf-pce-stateful-pce] provide stateful control of Multiprotocol
   Label Switching (MPLS) Traffic Engineering Label Switched Paths (TE
   LSP) via PCE communication Protocol (PCEP), for a model where the
   Path Computation Client (PCC) delegates control over one or more
   locally configured LSPs to the PCE.  Further
   [I-D.ietf-pce-pce-initiated-lsp] describes the creation and deletion
   of PCE-initiated LSPs under the stateful PCE model.  This document
   provides extensions required for PCEP so as to enable the usage of a
   stateful PCE initiation capability in recommending point-to-
   multipoint (P2MP) TE LSP instantiation.


The IETF datatracker status page for this draft is:
https://datatracker.ietf.org/doc/draft-palle-pce-stateful-pce-initiated-p2mp-lsp/

There's also a htmlized version available at:
http://tools.ietf.org/html/draft-palle-pce-stateful-pce-initiated-p2mp-lsp-03

A diff from the previous version is available at:
http://www.ietf.org/rfcdiff?url2=draft-palle-pce-stateful-pce-initiated-p2mp-lsp-03


Please note that it may take a couple of minutes from the time of submission
until the htmlized version and diff are available at tools.ietf.org.

Internet-Drafts are also available by anonymous FTP at:
ftp://ftp.ietf.org/internet-drafts/

I-D Action: draft-palle-pce-stateful-pce-initiate… internet-drafts