[Idr] draft-ietf-idr-rfc2796bis-01.txt

[Yakov Rekhter <[e-mail]>]

Folks,

draft-ietf-idr-rfc2796bis-01.txt reflects the comments received
during the WG Last Call.

Yakov.
------- Forwarded Message

Date:    Thu, 13 May 2004 13:02:03 -0400
From:    [e-mail]
To:      [e-mail]
cc:      [e-mail]
Subject: I-D ACTION:draft-ietf-idr-rfc2796bis-01.txt

- --NextPart

A New Internet-Draft is available from the on-line Internet-Drafts directories.
This draft is a work item of the Inter-Domain Routing Working Group of the IETF
.

	Title		: BGP Route Reflection - An Alternative to Full Mesh IB
GP
	Author(s)	: T. Bates, et al. 
	Filename	: draft-ietf-idr-rfc2796bis-01.txt
	Pages		: 12
	Date		: 2004-5-12
	
The Border Gateway Protocol (BGP) is an inter-autonomous system
   routing protocol designed for TCP/IP internets. Typically all BGP
   speakers within a single AS must be fully meshed so that any external
   routing information must be re-distributed to all other routers
   within that AS. This represents a serious scaling problem that has
   been well documented with several alternatives proposed.

   This document describes the use and design of a method known as
   "Route Reflection" to alleviate the the need for "full mesh" IBGP.

A URL for this Internet-Draft is:
http://www.ietf.org/internet-drafts/draft-ietf-idr-rfc2796bis-01.txt

To remove yourself from the I-D Announcement list, send a message to 
[e-mail] with the word unsubscribe in the body of the mess
age.  
You can also visit https://www1.ietf.org/mailman/listinfo/I-D-announce 
to change your subscription settings.


Internet-Drafts are also available by anonymous FTP. Login with the username
"anonymous" and a password of your e-mail address. After logging in,
type "cd internet-drafts" and then
	"get draft-ietf-idr-rfc2796bis-01.txt".

A list of Internet-Drafts directories can be found in
http://www.ietf.org/shadow.html 
or ftp://ftp.ietf.org/ietf/1shadow-sites.txt


Internet-Drafts can also be obtained by e-mail.

Send a message to:
	[e-mail].
In the body type:
	"FILE /internet-drafts/draft-ietf-idr-rfc2796bis-01.txt".
	
NOTE:	The mail server at ietf.org can return the document in
	MIME-encoded form by using the "mpack" utility.  To use this
	feature, insert the command "ENCODING mime" before the "FILE"
	command.  To decode the response(s), you will need "munpack" or
	a MIME-compliant mail reader.  Different MIME-compliant mail readers
	exhibit different behavior, especially when dealing with
	"multipart" MIME messages (i.e. documents which have been split
	up into multiple messages), so check your local documentation on
	how to manipulate these messages.
		
		
Below is the data which will enable a MIME compliant mail reader
implementation to automatically retrieve the ASCII version of the
Internet-Draft.

- --NextPart
Content-Type: Multipart/Alternative; Boundary="OtherAccess"

- --OtherAccess
Content-Type: Message/External-body;
	access-type="mail-server";
	server="[e-mail]"

Content-Type: text/plain
Content-ID:	<[e-mail]>

ENCODING mime
FILE /internet-drafts/draft-ietf-idr-rfc2796bis-01.txt

- --OtherAccess
Content-Type: Message/External-body;
	name="draft-ietf-idr-rfc2796bis-01.txt";
	site="ftp.ietf.org";
	access-type="anon-ftp";
	directory="internet-drafts"

Content-Type: text/plain
Content-ID:	<[e-mail]>

- --OtherAccess--

- --NextPart--



_______________________________________________
I-D-Announce mailing list
[e-mail]
https://www.ietf.org/mailman/listinfo/i-d-announce

------- End of Forwarded Message


_______________________________________________
Idr mailing list
[e-mail]
https://www1.ietf.org/mailman/listinfo/idr