I-D ACTION:draft-rfced-info-maruyama-01.txt
Internet-Drafts@ietf.org Mon, 28 April 1997 13:57 UTC
Received: from ietf.org by ietf.org id aa24342; 28 Apr 97 9:57 EDT
Received: from ietf.ietf.org by ietf.org id aa23799; 28 Apr 97 9:55 EDT
Mime-Version: 1.0
Content-Type: Multipart/Mixed; Boundary="NextPart"
To: IETF-Announce@ietf.org
Sender: ietf-announce-request@ietf.org
From: Internet-Drafts@ietf.org
Reply-to: Internet-Drafts@ietf.org
Subject: I-D ACTION:draft-rfced-info-maruyama-01.txt
Date: Mon, 28 Apr 1997 09:55:45 -0400
X-Orig-Sender: cclark@ietf.org
Message-ID: <9704280955.aa23799@ietf.org>
A Revised Internet-Draft is available from the on-line Internet-Drafts
directories.
Title : IP over MAPOS Version 1
Author(s) : K. Murakami, M. Maruyama
Filename : draft-rfced-info-maruyama-01.txt
Pages : 6
Date : 04/25/1997
This document describes a protocol for transmission of the Internet
Protocol Version 4 (IPv4) over Multiple Access Over SONET/SDH (MAPOS)
version 1. MAPOS is a link layer protocol and provides multiple access
capability over SONET/SDH links. IP runs on top of MAPOS. This document
explains IP datagram encapsulation in HDLC frame of MAPOS, and the Address
Resolution Protocol (ARP).
Internet-Drafts are available by anonymous FTP. Login with the username
"anonymous" and a password of your e-mail address. After logging in,
type "cd internet-drafts" and then
"get draft-rfced-info-maruyama-01.txt".
A URL for the Internet-Draft is:
ftp://ds.internic.net/internet-drafts/draft-rfced-info-maruyama-01.txt
Internet-Drafts directories are located at:
o Africa: ftp.is.co.za
o Europe: ftp.nordu.net
ftp.nis.garr.it
o Pacific Rim: munnari.oz.au
o US East Coast: ds.internic.net
o US West Coast: ftp.isi.edu
Internet-Drafts are also available by mail.
Send a message to: mailserv@ds.internic.net. In the body type:
"FILE /internet-drafts/draft-rfced-info-maruyama-01.txt".
NOTE: The mail server at ds.internic.net can return the document in
MIME-encoded form by using the "mpack" utility. To use this
feature, insert the command "ENCODING mime" before the "FILE"
command. To decode the response(s), you will need "munpack" or
a MIME-compliant mail reader. Different MIME-compliant mail readers
exhibit different behavior, especially when dealing with
"multipart" MIME messages (i.e., documents which have been split
up into multiple messages), so check your local documentation on
how to manipulate these messages.
Below is the data which will enable a MIME compliant mail reader
implementation to automatically retrieve the ASCII version
of the Internet-Draft.
- I-D ACTION:draft-rfced-info-maruyama-01.txt Internet-Drafts