[imss] RE: Protocol Action: 'MIB for Fibre-Channel's Fabric Shortest Path First Protocol' to Proposed Standard

["Romascanu, Dan \(Dan\)" <[e-mail]>]

Thanks and congratulations to the editors and to the WGs for the
completion of this work.

Dan

 
 

> -----Original Message-----
> From: The IESG [mailto:[e-mail]] 
> Sent: Tuesday, May 16, 2006 6:37 PM
> To: IETF-Announce
> Cc: imss mailing list; Internet Architecture Board; imss 
> chair; RFC Editor
> Subject: Protocol Action: 'MIB for Fibre-Channel's Fabric 
> Shortest Path First Protocol' to Proposed Standard 
> 
> The IESG has approved the following document:
> 
> - 'MIB for Fibre-Channel's Fabric Shortest Path First Protocol '
>    <draft-ietf-imss-fc-fspf-mib-03.txt> as a Proposed Standard
> 
> This document is the product of the Internet and Management 
> Support for Storage
>  
> Working Group. 
> 
> The IESG contact persons are Dan Romascanu and David Kessens.
> 
> A URL of this Internet-Draft is:
> http://www.ietf.org/internet-drafts/draft-ietf-imss-fc-fspf-mib-03.txt
> 
> Technical Summary
>  
>    This memo defines a portion of the Management Information 
> Base (MIB)
>    for use with network management protocols in the Internet 
> community.
>    In particular, it describes managed objects for information related
>    to the Fibre Channel network's Fabric Shortest Path First (FSPF)
>    routing protocol.
>  
> Working Group Summary
>  
>    This document was reviewed in the IMSS WG and in Technical 
> Committee
>    T11 (the official Fibre Channel standards body).  T11 voted to
>    recommend a prior version of this document to the IETF.
> 
> Protocol Quality
>  
>    The protocol has been reviewed for the imss WG by Keith 
> McCloghrie and 
>    for the Operations and Management Area by Bert Wijnen.
> 
> Note to RFC Editor
>  
> The following modificatione need to be introduced by the RFC Editor:
> 
> 1) [FC-FAM-MIB] became [RFC4439]
> 
> 2) [FC-RTM-MIB] included in the list of Normative References 
> is not referenced in the text. Please take it out  
> 
> 3) Section 3, create sub-section 3.1
> 
>   Replace OLD: 
> 
>     3.  Short Overview of Fibre Channel
> 
>   With NEW:
> 
>     3.  Short Overview of Fibre Channel
> 
>     3.1  Introduction
> 
> 4) Section 3, create sub-section 3.2
> 
>   Replace OLD: 
> 
>      FSPF has four major components:
> 
>         a) A Hello protocol, used to establish connectivity with a
>         ...
> 
>   With NEW:
> 
>      3.2  FSPF Protocol
> 
>      FSPF has four major components:
> 
>         a) A Hello protocol, used to establish connectivity with a
>         ...
> 
> 5) Section 3, create sub-section 3.3
> 
>   Replace OLD: 
> 
>      The latest standard for an interconnecting Fabric 
> containing multiple
>      Fabric Switch elements is [FC-SW-4] (which replaces the previous
>      ...
> 
>   With NEW:
> 
>      3.3  Virtual Fabrics
> 
>      The latest standard for an interconnecting Fabric 
> containing multiple
>      Fabric Switch elements is [FC-SW-4] (which replaces the previous
>      ...
> 
> 6) Append to Section 1 the following paragraph:
> 
> NEW:
> 
>     The key words "MUST", "MUST NOT", "REQUIRED", "SHALL", 
> "SHALL NOT",
>     "SHOULD", "SHOULD NOT", "RECOMMENDED", "MAY", and 
> "OPTIONAL" in this
>     document are to be interpreted as described in RFC 2119.
> 
> 7) Add to Normative References the Following
> 
>   [RFC2119]   Bradner, S., "Key words for use in RFCs to Indicate
>                Requirement Levels", BCP 14, RFC 2119, March 1997.
> 
> IANA Note
> 
>   IANA is requested to make a MIB OID assignment for the T11-FC-FSPF-
>   MIB module under the appropriate subtree.
> 
> 
> 

_______________________________________________
imss mailing list
[e-mail]
https://www1.ietf.org/mailman/listinfo/imss