Re: [IPP] High-level changes section for IPP Finishings v2.1?

["Kennedy, Smith (Wireless Architect)" <[e-mail]>]

Update just posted here:

http://ftp.pwg.org/pub/pwg/ipp/wd/wd-ippfinishings21-20161109.docx
http://ftp.pwg.org/pub/pwg/ipp/wd/wd-ippfinishings21-20161109.pdf
http://ftp.pwg.org/pub/pwg/ipp/wd/wd-ippfinishings21-20161109-rev.pdf
http://ftp.pwg.org/pub/pwg/ipp/wd/wd-ippfinishings21-20161109-rev.docx

Smith

/**
    Smith Kennedy
    Wireless Architect - Client Software - IPG-PPS
    Standards - IEEE ISTO PWG / Bluetooth SIG / Wi-Fi Alliance / NFC Forum / USB IF
    Chair, IEEE ISTO Printer Working Group
    HP Inc.
*/



> On Nov 9, 2016, at 9:51 AM, Ira McDonald <[e-mail]> wrote:
> 
> Hi Smith,
> 
> At least in IETF and ISO documents the "Changes Since" section is
> an appendix with a forward reference from section 1 Intro.
> 
> Cheers,
> - Ira
> 
> 
> Ira McDonald (Musician / Software Architect)
> Co-Chair - TCG Trusted Mobility Solutions WG
> Chair - Linux Foundation Open Printing WG
> Secretary - IEEE-ISTO Printer Working Group
> Co-Chair - IEEE-ISTO PWG Internet Printing Protocol WG
> IETF Designated Expert - IPP & Printer MIB
> Blue Roof Music / High North Inc
> http://sites.google.com/site/blueroofmusic
> http://sites.google.com/site/highnorthinc
> mailto: [e-mail]
> Jan-April: 579 Park Place  Saline, MI  48176  734-944-0094
> May-Dec: PO Box 221  Grand Marais, MI 49839  906-494-2434
> 
> 
> On Wed, Nov 9, 2016 at 11:45 AM, Kennedy, Smith (Wireless Architect) <[e-mail]> wrote:
> I think that is a good idea as well. I'll add that and post a new release here in a few minutes. But should it be that late in the document? Wouldn't it be better if it was inserted in between the current section 3 "Requirements" and section 4 "Overview of Finishing", or the current section 4 "Overview of Finishing" and section 5 "Job Template Attributes"?
> 
> Smith
> 
> 
> 
>> On Nov 9, 2016, at 7:57 AM, Ira McDonald <[e-mail]> wrote:
>> 
>> Hi Mike,
>> 
>> I like your suggestion and agree with your initial suggested content.
>> 
>> These "Changes Since" sections are important for new readers and
>> those who've "been away for awhile."
>> 
>> Cheers,
>> - Ira
>> 
>> 
>> Ira McDonald (Musician / Software Architect)
>> Co-Chair - TCG Trusted Mobility Solutions WG
>> Chair - Linux Foundation Open Printing WG
>> Secretary - IEEE-ISTO Printer Working Group
>> Co-Chair - IEEE-ISTO PWG Internet Printing Protocol WG
>> IETF Designated Expert - IPP & Printer MIB
>> Blue Roof Music / High North Inc
>> http://sites.google.com/site/blueroofmusic
>> http://sites.google.com/site/highnorthinc
>> mailto: [e-mail]
>> Jan-April: 579 Park Place  Saline, MI  48176  734-944-0094
>> May-Dec: PO Box 221  Grand Marais, MI 49839  906-494-2434
>> 
>> 
>> On Wed, Nov 9, 2016 at 8:29 AM, Michael Sweet <[e-mail]> wrote:
>> All,
>> 
>> It occurs to me, after looking at the current stable draft of IPP Finishings 2.1, that we don't have a high-level "Changes" section detailing the changes between published versions of PWG 5100.1 like we do for RFC2910bis and RFC2911bis, and that such a section would help our discussions at the F2F as well as providing useful context for readers once the update is published.
>> 
>> Proposed content:
>> 
>> 11. Overview of Changes
>> 
>> 11.1 Changes in IPP Finishings v2.1
>> 
>> The following changes were made for IPP Finishings v2.1:
>> 
>> - Added finishing enums and templates for multiple-hole punching and an engineering Z fold.
>> - Defined an extension naming convention for the "finishing-template" member attribute.
>> - Added the "media-sheets-supported" member attribute for the "finishings-col-database" and "finishings-col-ready" attributes.
>> - Added the "stitching-method" member attribute for the "finishings-col", "finishings-col-database", and "finishings-col-ready" attributes.
>> - Added the "printer-finisher-supplies" and "printer-finisher-supplies-description" attributes.
>> 
>> 11.2 Changes in IPP Finishings v2.0
>> 
>> The following changes were made for IPP Finishings v2.0:
>> 
>> - Moved definition of PWG 5100.3 "finishings-col" attribute to this document and added new member attributes for all finishings processes.
>> - Added finishing enums and templates for coating, lamination, triple stapling, different kinds of punching, and common folds.
>> - Added the "finishings-col-database" and "job-pages-per-set" attributes.
>> - Added the "media-size" and "media-size-name" member attributes for the "finishings-col-database" and "finishings-col-ready" attributes.
>> 
>> _________________________________________________________
>> Michael Sweet, Senior Printing System Engineer
>> 
>> _______________________________________________
>> ipp mailing list
>> [e-mail]
>> https://www.pwg.org/mailman/listinfo/ipp
>> 
>> _______________________________________________
>> ipp mailing list
>> [e-mail]
>> https://www.pwg.org/mailman/listinfo/ipp
> 
> 

_______________________________________________
ipp mailing list
[e-mail]
https://www.pwg.org/mailman/listinfo/ipp