RE: Protocol Action: FC Frame Encapsulation to Proposed Standard

Black_David@emc.com Tue, 21 January 2003 22:18 UTC

Return-Path: <owner-ips@ece.cmu.edu>
X-Sieve: cmu-sieve 2.0
Return-Path: <owner-ips@ece.cmu.edu>
Received: (from majordom@localhost) by ece.cmu.edu (8.11.0/8.10.2) id h0LMItw13369 for ips-outgoing; Tue, 21 Jan 2003 17:18:55 -0500 (EST)
X-Authentication-Warning: ece.cmu.edu: majordom set sender to owner-ips@ece.cmu.edu using -f
Received: from mxic1.corp.emc.com ([128.222.32.10]) by ece.cmu.edu (8.11.0/8.10.2) with ESMTP id h0LMIsW13361 for <ips@ece.cmu.edu>; Tue, 21 Jan 2003 17:18:54 -0500 (EST)
Received: by mxic1.corp.emc.com with Internet Mail Service (5.5.2653.19) id <ZF4D9030>; Tue, 21 Jan 2003 17:18:41 -0500
Message-ID: <277DD60FB639D511AC0400B0D068B71E0564C7D6@corpmx14.us.dg.com>
From: Black_David@emc.com
To: ips@ece.cmu.edu
Subject: RE: Protocol Action: FC Frame Encapsulation to Proposed Standard
Date: Tue, 21 Jan 2003 17:17:46 -0500
MIME-Version: 1.0
X-Mailer: Internet Mail Service (5.5.2653.19)
Content-Type: text/plain; charset="iso-8859-1"
Sender: owner-ips@ece.cmu.edu
Precedence: bulk

Everyone,

There's a minor update to this announcement - the approved version
of iFCP was actually:
	<draft-ietf-ips-ifcp-14.txt>
The secretariat wishes to apologize for the "off by one" error due
to overwork.

Thanks,
--David

> -----Original Message-----
> From: The IESG [mailto:iesg-secretary@ietf.org]
> Sent: Monday, January 20, 2003 1:16 PM
> Cc: RFC Editor; Internet Architecture Board; ips@ece.cmu.edu
> Subject: Protocol Action: FC Frame Encapsulation to Proposed Standard
> 
> 
> 
> 
>  The IESG has approved publication of the following Internet-Drafts as
>  Proposed Standards:
> 
> 
>    o FC Frame Encapsulation <draft-ietf-ips-fcencapsulation-08.txt>
> 
>    o Fibre Channel Over TCP/IP (FCIP) 
> <draft-ietf-ips-fcovertcpip-12.txt> 
> 
>    o iFCP - A Protocol for Internet Fibre Channel Storage Networking
>        <draft-ietf-ips-ifcp-13.txt>
> 
> 
>  This document is the product of the IP Storage Working Group.
>  The IESG contact persons are Scott Bradner and Allison Mankin.
>    
>  Technical Summary
> 
> The Fibre Channel (CC) frame encapsulation document specifies the 
> common format and a procedure for the measurement and calculation of 
> frame transit time through the IP network. This specification is used
> by the other two protocols (and any others in future).
> 
> The Fibre Channel over TCP/IP (FCIP) 
> 
> The iFCP specification document specifies the 
> encapsulation of frames among FC storage area networks (SANs) through 
> gateways that are interconnected with TCP/IP networks. 
> 
> 
> Two significant steps were taken by with Fibre Channel technology with
> these protocols: adoption of TCP transport between the devices and
> clients (or gateways in the case of iFCP), and adoption of strong 
> security threat models and mandatory to implement encryption and 
> integrity. The TCP usage provides congestion avoidance, which 
> is needed 
> since the "bus" is a network and congestion and usage are less 
> predictable than they were in the pre-IP-storage technology.
> 
> The security threat models and requirements are provided in these 
> drafts as the primary, but with more detail in the document Securing 
> Block Storage Protocol over IP (a misnomer, since TCP is the 
> transport, 
> of course :). A detailed configuration of required usage for IPsec and
> IKE is described, along with motivation.
>    
>  Working Group Summary
> 
> There was strong Working Group Consensus for these documents, and
> they had strong consensus from the industry, community and IETF Last 
> Calls
>    
>    
>  Protocol Quality
>    
> These documents were reviewed for the IESG by Elizabeth Rodriguez 
> and Allison Mankin. Implementations are known to be interoperating.
> 
> RFC Editor Note:
> 
> RFC Editor, Please place the following note at the beginning of 
> Section 5.1, FC Frame Content, of draft-ietf-ips-fcencapsulation,
> and at the beginning of APPENDIX F - FC FRAME FORMAT, of 
> draft-ietf-ips-fcovertcpip.
> 
> 	NOTE: All uses of the words "character" or "characters" in 
> 	this section refer to 8bit/10bit link encoding wherein each 
> 	8 bit "character" within a link frame is encoded as a 10 bit 
> 	"character" for link transmission. These words do not refer to 
> 	ASCII, Unicode, or any other form of text characters, although
>       octets from such characters will occur as 8 bit "characters" 
> 	for this encoding. This usage is employed here for consistency
>       with the ANSI T11 standards that specify Fibre Channel.
>