[mpls] I-D Action:draft-ietf-mpls-p2mp-te-mib-06.txt

A New Internet-Draft is available from the on-line Internet-Drafts directories.
This draft is a work item of the Multiprotocol Label Switching Working Group of the IETF.

	Title           : Point-to-Multipoint Multiprotocol Label Switching (MPLS) Traffic Engineering (TE) Management Information Base (MIB) module
	Author(s)       : A. Farrel, et al.
	Filename        : draft-ietf-mpls-p2mp-te-mib-06.txt
	Pages           : 58
	Date            : 2008-02-14

This memo defines a portion of the Management Information Base
for use with network management protocols in the Internet community.
In particular, it describes managed objects for point-to-multipoint
(P2MP) Multiprotocol Label Switching (MPLS) based traffic engineering
(TE).

The MIB module defined in this document is applicable to P2MP MPLS-TE
by extensions to the MPLS-TE MIB module defined in RFC 3812. It is
equally applicable to P2MP Generalized MPLS (GMPLS) in association
with the GMPLS TE MIB module defined in RFC 4802.

A URL for this Internet-Draft is:
http://www.ietf.org/internet-drafts/draft-ietf-mpls-p2mp-te-mib-06.txt

To remove yourself from the I-D Announcement list, send a message to
i-d-announce-request@ietf.org with the word unsubscribe in the body of 
the message.
You can also visit https://www1.ietf.org/mailman/listinfo/I-D-announce
to change your subscription settings.

Internet-Drafts are also available by anonymous FTP. Login with the 
username "anonymous" and a password of your e-mail address. After 
logging in, type "cd internet-drafts" and then
	"get draft-ietf-mpls-p2mp-te-mib-06.txt".

A list of Internet-Drafts directories can be found in
http://www.ietf.org/shadow.html
or ftp://ftp.ietf.org/ietf/1shadow-sites.txt

Internet-Drafts can also be obtained by e-mail.

Send a message to:
	mailserv@ietf.org.
In the body type:
	"FILE /internet-drafts/draft-ietf-mpls-p2mp-te-mib-06.txt".

NOTE:   The mail server at ietf.org can return the document in
	MIME-encoded form by using the "mpack" utility.  To use this
	feature, insert the command "ENCODING mime" before the "FILE"
	command.  To decode the response(s), you will need "munpack" or
	a MIME-compliant mail reader.  Different MIME-compliant mail readers
	exhibit different behavior, especially when dealing with
	"multipart" MIME messages (i.e. documents which have been split
	up into multiple messages), so check your local documentation on
	how to manipulate these messages.

Below is the data which will enable a MIME compliant mail reader
implementation to automatically retrieve the ASCII version of the
Internet-Draft.