[mpls] FW: I-D Action:draft-ietf-mpls-number-0-bw-te-lsps-07.txt

[JP Vasseur <[e-mail]>]

Hi,

This new revision takes into account the comments received during WG LC from
Adrian, Attila and Lou (Could you confirm that we addressed your comments?).

Thanks.

JP.

------ Forwarded Message
> From: <[e-mail]>
> Reply-To: <[e-mail]>
> Date: Fri, 16 Nov 2007 17:20:02 -0500
> To: <[e-mail]>
> Cc: <[e-mail]>
> Subject: I-D Action:draft-ietf-mpls-number-0-bw-te-lsps-07.txt
> 
> A New Internet-Draft is available from the on-line Internet-Drafts
> directories.
> This draft is a work item of the Multiprotocol Label Switching Working Group
> of the IETF.
> 
> 
> Title           : A Link-Type sub-TLV to convey the number of Traffic
> Engineering Label Switched Paths signalled with zero reserved bandwidth across
> a link
> Author(s)       : J. Vasseur, et al.
> Filename        : draft-ietf-mpls-number-0-bw-te-lsps-07.txt
> Pages           : 9
> Date            : 2007-11-16
> 
> Several Link-type sub-TLVs have been defined for OSPF and IS-IS in
> the context of Multiprotocol Label Switching (MPLS) Traffic
> Engineering (TE) in order to advertise some link characteristics such
> as the available bandwidth, traffic engineering metric,
> administrative group and so on.  By making statistical assumption
> about the aggregated traffic carried onto a set of TE Label Switched
> Paths (LSPs) signalled with zero bandwith (referred to as
> unconstrained TE LSP in this document), and with the knowledge of the
> number of unconstrained TE LSPs signalled across a link, algorithms
> can be designed to load balance (existing or newly configured)
> unconstrained TE LSP across a set of equal cost paths.  This requires
> knowledge of the number of unconstrained TE LSPs signalled across a
> link.  This document specifies a new Link-type Traffic Engineering
> sub-TLV used to advertise the number of unconstrained TE LSP(s)
> signalled across a link.
> 
> A URL for this Internet-Draft is:
> http://www.ietf.org/internet-drafts/draft-ietf-mpls-number-0-bw-te-lsps-07.txt
> 
> To remove yourself from the I-D Announcement list, send a message to
> [e-mail] with the word unsubscribe in the body of
> the message.
> You can also visit https://www1.ietf.org/mailman/listinfo/I-D-announce
> to change your subscription settings.
> 
> Internet-Drafts are also available by anonymous FTP. Login with the
> username "anonymous" and a password of your e-mail address. After
> logging in, type "cd internet-drafts" and then
> "get draft-ietf-mpls-number-0-bw-te-lsps-07.txt".
> 
> A list of Internet-Drafts directories can be found in
> http://www.ietf.org/shadow.html
> or ftp://ftp.ietf.org/ietf/1shadow-sites.txt
> 
> Internet-Drafts can also be obtained by e-mail.
> 
> Send a message to:
> [e-mail].
> In the body type:
> "FILE /internet-drafts/draft-ietf-mpls-number-0-bw-te-lsps-07.txt".
> 
> NOTE:   The mail server at ietf.org can return the document in
> MIME-encoded form by using the "mpack" utility.  To use this
> feature, insert the command "ENCODING mime" before the "FILE"
> command.  To decode the response(s), you will need "munpack" or
> a MIME-compliant mail reader.  Different MIME-compliant mail readers
> exhibit different behavior, especially when dealing with
> "multipart" MIME messages (i.e. documents which have been split
> up into multiple messages), so check your local documentation on
> how to manipulate these messages.
> 
> Below is the data which will enable a MIME compliant mail reader
> implementation to automatically retrieve the ASCII version of the
> Internet-Draft.
> Content-Type: text/plain
> Content-ID: <2007-11-16171200.I-D\@ietf.org>
> 
> _______________________________________________
> I-D-Announce mailing list
> [e-mail]
> https://www1.ietf.org/mailman/listinfo/i-d-announce

------ End of Forwarded Message


_______________________________________________
mpls mailing list
[e-mail]
https://www1.ietf.org/mailman/listinfo/mpls