Re: [OAUTH-WG] [EXTERNAL] Re: Authorization code reuse and OAuth 2.1

I don't think those cases can be distinguished it practice, which is both
the point of the discussion and the differencing of opinion on how to
handle this.

To whom is the question. If the AS thinks that it isn't used yet, then it
isn't reuse. If the AS thinks it is used but the client doesn't this is the
case we are talking about. The auth code has been completed by the AS but
the client failed to continue, either it was never successfully received
due to a network error or processing on the client side failed. No reason
to unnecessarily punish the user.

To infer from your comment, you mean for the current wording to stay
exactly as is without change, is that correct, or did I miss a key point?

On Mon, Oct 18, 2021, 02:41 Takahiko Kawasaki <taka@authlete.com> wrote:

> Allowing to specify the same authorization code for retrial due to network
> failure is different from allowing reuse of successfully-consumed
> authorization code. They should not be mixed. The former is acceptable, but
> the latter should be prohibited.
>
>
> The difference between (1) reuse of authorization code and (2) reuse of
> successfully-consumed authorization code is important for discussion.
>
>
> Taka
>
> On Sat, Oct 16, 2021 at 12:13 AM Daniel Fett <fett@danielfett.de> wrote:
>
>> I don't think that a MAY is appropriate here.
>>
>> I wasn't in the call yesterday, so I hope I don't miss anything here,
>> but...
>>
>> Even with PKCE, the one-time use requirement of the code is still
>> important. First and foremost, if we allow unlimited re-use of the same
>> code, even just as an option, we change the semantics of this artifact. I
>> guess there are many examples where this causes issues, but one would be
>> DPoP. It assumes that there is only one (successful) token request and in
>> that request, the token is bound to a specific key. If there can be more
>> than one successful token request, all it takes is code_challenge and the
>> code sitting around somewhere in accessible memory and an XSS attacker can
>> exfiltrate them and use them on his own device, binding the resulting token
>> to an attacker-controlled key. This is the attack outcome against which we
>> introduced the nonce in DPoP. (Probably we should add this thought as a
>> security consideration to DPoP, but that is a different topic.) I guess we
>> can come up with many other mechanisms and mitigations that depend on code
>> being one-time use.
>>
>> The attack described also shows nicely that code replay protection and
>> PKCE serve similar purposes, but are not the same thing.
>>
>> The Security BCP introduces a second layer of defense at pretty much all
>> the critical places in the protocol, because practice shows that a single
>> defense can break too easily. For example, an attacker with read-only
>> access to the token request would be pretty bad without code replay
>> protections in place. Such attackers are considered in FAPI. (Somebody
>> capable of reading system logs at the client or server, proxy logs at the
>> client or server, browser logs, etc.)
>>
>> Therefore, in my opinion, the code MUST be short-lived and at least
>> SHOULD, better MUST be one-time use.
>>
>> And ideally, the code SHOULD also be invalidated if the PKCE verifier
>> does not match, not sure if that is in the current text or not.
>>
>> -Daniel
>>
>>
>>
>> Am 15.10.21 um 11:04 schrieb Pieter Kasselman:
>>
>> SHOULD is more likely to cause the right conversations to take place for
>> implementors as they weigh the risks. Reducing it to MAY risks diluting it
>> too much.
>>
>>
>>
>> *From:* OAuth <oauth-bounces@ietf.org> <oauth-bounces@ietf.org> *On
>> Behalf Of *Warren Parad
>> *Sent:* Friday 15 October 2021 09:25
>> *To:* Pieter Kasselman <pieter.kasselman=40microsoft.com@dmarc.ietf.org>
>> <pieter.kasselman=40microsoft.com@dmarc.ietf.org>
>> *Cc:* IETF oauth WG <oauth@ietf.org> <oauth@ietf.org>
>> *Subject:* Re: [OAUTH-WG] [EXTERNAL] Re: Authorization code reuse and
>> OAuth 2.1
>>
>>
>>
>> I wouldn't be against lowering it to MAY but only if we stipulate a
>> SHOULD on an expected lifetime of an authorization code. I think sending
>> the message that these should be one time use except in exceptional
>> circumstances.
>>
>>
>> *Warren Parad*
>>
>> Founder, CTO
>>
>> Secure your user data with IAM authorization as a service. Implement
>> Authress
>> <https://nam06.safelinks.protection.outlook.com/?url=https%3A%2F%2Fauthress.io%2F&data=04%7C01%7Cpieter.kasselman%40microsoft.com%7C0d1e820fa1664a5bb1ab08d98fb54d4f%7C72f988bf86f141af91ab2d7cd011db47%7C1%7C0%7C637698831154740432%7CUnknown%7CTWFpbGZsb3d8eyJWIjoiMC4wLjAwMDAiLCJQIjoiV2luMzIiLCJBTiI6Ik1haWwiLCJXVCI6Mn0%3D%7C1000&sdata=6rSI2UvnakrWNh3qtBEgIMbRO8L9oXu8zGj4Fd128B8%3D&reserved=0>
>> .
>>
>>
>>
>>
>>
>> On Fri, Oct 15, 2021 at 10:17 AM Pieter Kasselman <pieter.kasselman=
>> 40microsoft.com@dmarc.ietf.org> wrote:
>>
>> Any weakening of the requirement should include a clear outline of the
>> risks to help implementors make informed decisions.
>>
>>
>>
>> *From:* OAuth <oauth-bounces@ietf.org> *On Behalf Of *Ash Narayanan
>> *Sent:* Friday 15 October 2021 01:51
>> *To:* Aaron Parecki <aaron@parecki.com>
>> *Cc:* IETF oauth WG <oauth@ietf.org>
>> *Subject:* Re: [OAUTH-WG] [EXTERNAL] Re: Authorization code reuse and
>> OAuth 2.1
>>
>>
>>
>> You don't often get email from ashvinnarayanan@gmail.com. Learn why this
>> is important <http://aka.ms/LearnAboutSenderIdentification>
>>
>> Yes, as I said before, authorization servers are free to enforce one-time
>> use of the authorization code even if there isn't a requirement to. The
>> proposal is just to remove the *requirement* of authorization servers
>> enforcing it.
>>
>>
>>
>> I agree, and therefore I think what it really ought to be is "MAY".
>>
>>
>>
>> Annabelle said:
>>
>> There are legitimate use cases for a client to replay an authorization
>> code. Connection failures happen. Servers fall over before completing
>> requests. Users hit browser refresh buttons. Permitting replay of
>> authorization codes (assuming valid PKCE, client creds, etc.) allows
>> clients to handle these failure modes simply and gracefully via retries.
>>
>>
>>
>> Couldn't agree more. Having experienced these exact use-cases, I can
>> honestly say that denying users a smooth experience just to be compliant
>> with the spec, which offers no additional security if PKCE is also being
>> used, makes no sense.
>>
>> It is also more effort (from a repository layer perspective) to implement
>> one-time use than do PKCE verification.
>>
>>
>>
>> What is the practical reason for allowing "plain" PKCE in OAuth 2.1? Are
>> there really use cases out there where SHA-256 is a deal breaker?
>>
>>
>>
>> I'd be interested in these use-cases as well (I can't think of any).
>>
>>
>>
>> On Thu, Oct 14, 2021 at 8:36 AM Aaron Parecki <aaron@parecki.com> wrote:
>>
>> Yes, as I said before, authorization servers are free to enforce one-time
>> use of the authorization code even if there isn't a requirement to. The
>> proposal is just to remove the *requirement* of authorization servers
>> enforcing it.
>>
>>
>>
>> I am okay with Mike's suggestion of changing the language to "SHOULD" to
>> continue to point out the possibility of enforcing one-time authorization
>> codes if desired.
>>
>>
>>
>>
>>
>>
>>
>> On Wed, Oct 13, 2021 at 2:15 PM Pieter Kasselman <
>> pieter.kasselman@microsoft.com> wrote:
>>
>> Log files can exist in lots of place (clients, servers, data lakes). The
>> question is whether it is a valid assumption that an attacker cannot obtain
>> an Authorization Code and a Code Verifier and present it a second time
>> round. Limiting the validity period is one layer of defence, PKCE is
>> another layer, one time use enforcement is another. Assuming breach and
>> designing from a defence in depth perspective is a good practice, so why
>> not give implementors options (and guidance) to add additional layers of
>> defence to match their risk profiles?
>>
>>
>>
>>
>>
>> *From:* OAuth <oauth-bounces@ietf.org> *On Behalf Of *Sascha Preibisch
>> *Sent:* Wednesday 13 October 2021 22:06
>> *To:* Aaron Parecki <aaron@parecki.com>
>> *Cc:* IETF oauth WG <oauth@ietf.org>
>> *Subject:* Re: [OAUTH-WG] [EXTERNAL] Re: Authorization code reuse and
>> OAuth 2.1
>>
>>
>>
>> Ok, if the goal is to avoid unnecessary requirements I am suggesting to
>> point out why MUST was changed to SHOULD. Otherwise developers will start
>> to mix and match OAuth 2.0 and OAuth 2.1 requirements as they see them fit
>> their needs.
>>
>> In regards to encrypted values in PKCE, Aaron, I can also not confirm
>> that as the general implementation.
>>
>>
>>
>> On Wed, 13 Oct 2021 at 13:56, Aaron Parecki <aaron@parecki.com> wrote:
>>
>> The PKCE spec actually says "Typically, the "code_challenge" and
>> "code_challenge_method" values are stored in encrypted form in the "code"
>> itself" which I feel like might be a stretch to say that's typical, but
>> this scenario was clearly thought of ahead of time. Doing that would enable
>> an AS to avoid storing server-side state.
>>
>>
>>
>> On Wed, Oct 13, 2021 at 1:50 PM Sascha Preibisch <
>> saschapreibisch@gmail.com> wrote:
>>
>> If the challenge is based on distributed authorization server
>> configurations, how would they handle PKCE? I imagine that managing the
>> state for PKCE is not less challenging than managing authorization codes on
>> the server side, preventing reuse of them.
>>
>> With that in mind I am not sure if I follow the given argument. I would
>> prefer to keep MUST as it is today.
>>
>>
>>
>>
>>
>> On Wed, 13 Oct 2021 at 13:37, Aaron Parecki <aaron@parecki.com> wrote:
>>
>> HTTPS, because if that's broken then the rest of OAuth falls apart too.
>>
>>
>>
>> On Wed, Oct 13, 2021 at 1:36 PM Warren Parad <wparad@rhosys.ch> wrote:
>>
>> I feel like I'm missing something, what stops just plain old network
>> sniffing and replying the whole encrypted payload to the AS and getting
>> back a valid token?
>>
>>
>> [image: Image removed by sender.]
>>
>> *Warren Parad*
>>
>> Founder, CTO
>>
>> Secure your user data with IAM authorization as a service. Implement
>> Authress
>> <https://nam06.safelinks.protection.outlook.com/?url=https%3A%2F%2Fauthress.io%2F&data=04%7C01%7Cpieter.kasselman%40microsoft.com%7C0d1e820fa1664a5bb1ab08d98fb54d4f%7C72f988bf86f141af91ab2d7cd011db47%7C1%7C0%7C637698831154750385%7CUnknown%7CTWFpbGZsb3d8eyJWIjoiMC4wLjAwMDAiLCJQIjoiV2luMzIiLCJBTiI6Ik1haWwiLCJXVCI6Mn0%3D%7C1000&sdata=y86Gy8RiRIbIAW3So8hr4PxYsta1VWX1X7l%2FHzVbcvI%3D&reserved=0>
>> .
>>
>>
>>
>>
>>
>> On Wed, Oct 13, 2021 at 10:33 PM Aaron Parecki <aaron@parecki.com> wrote:
>>
>> Aside from the "plain" method, the PKCE code verifier never leaves the
>> client until it's sent along with the authorization code in the POST
>> request to the token endpoint. The only place it can leak at that point is
>> if the authorization server itself leaks it. If you have things leaking
>> from the authorization server log, you likely have much bigger problems
>> than authorization code replays.
>>
>>
>>
>> Keep in mind that even with the proposed change to drop the requirement
>> of authorization codes being one time use, authorization servers are free
>> to enforce this still if they want. Authorization code lifetimes are still
>> expected to be short lived as well.
>>
>>
>>
>> Aaron
>>
>>
>>
>>
>>
>> On Wed, Oct 13, 2021 at 1:25 PM Pieter Kasselman <
>> pieter.kasselman@microsoft.com> wrote:
>>
>> Aaron, I was curious what prevents an attacker from presenting an
>> Authorization Code and a PKCE Code Verifier for a second time if the one
>> time use requirement is removed. Is there another countermeasure in  PKCE
>> that would prevent it? For example, an attacker may obtain the
>> Authorization Code and the Code Verifier from a log and replay it.
>>
>>
>>
>> Cheers
>>
>>
>>
>> Pieter
>>
>>
>>
>> *From:* OAuth <oauth-bounces@ietf.org> *On Behalf Of *Aaron Parecki
>> *Sent:* Wednesday 13 October 2021 18:40
>> *To:* Warren Parad <wparad=40rhosys.ch@dmarc.ietf.org>
>> *Cc:* Mike Jones <Michael.Jones=40microsoft.com@dmarc.ietf.org>;
>> oauth@ietf.org
>> *Subject:* [EXTERNAL] Re: [OAUTH-WG] Authorization code reuse and OAuth
>> 2.1
>>
>>
>>
>> Warren, I didn't see you on the interim call, so you might be missing
>> some context.
>>
>>
>>
>> The issue that was discussed is that using PKCE already provides all the
>> security benefit that is gained by enforcing single-use authorization
>> codes. Therefore, requiring that they are single-use isn't necessary as it
>> doesn't provide any additional benefit.
>>
>>
>>
>> If anyone can think of a possible attack by allowing authorization codes
>> to be reused *even with a valid PKCE code verifier* then that would warrant
>> keeping this requirement.
>>
>>
>>
>> ---
>>
>> Aaron Parecki
>>
>>
>>
>>
>>
>> On Wed, Oct 13, 2021 at 10:27 AM Warren Parad <wparad=
>> 40rhosys.ch@dmarc.ietf.org> wrote:
>>
>> Isn't it better for it to be worded as we want it to be, with the
>> implication being that of course it might be difficult to do that, but that
>> AS devs will think long and hard about sometimes not denying the request?
>> Even with MUST, some AS will still allow reuse of auth codes. Isn't that
>> better than flat out saying: *sure, there's a valid reason*
>>
>>
>>
>> In other words, how do we think about RFCs? Do they exist to be followed
>> to the letter or not at all? Or do they exist to stipulate this is the way,
>> but acknowledge that not everyone will build a solution that holds them as
>> law.
>>
>>
>>
>> Let's look at *SHOULD*
>>
>> This word, or the adjective "RECOMMENDED", mean that there may exist
>> valid reasons in particular circumstances to ignore a particular item, but
>> the full implications must be understood and carefully weighed before
>> choosing a different course.
>>
>>
>>
>> I think *recommended* here is not sufficient nor are there valid
>> reasons. "It's too hard" isn't really a valid reason. Isn't it better in
>> this case for an AS to not be compliant with the RFC, than it is to relax
>> this to SHOULD and have lots of AS thinking reusing auth codes is a viable
>> solution, "because they are a special snowflake where SHOULD should apply".
>>
>>
>>
>> Are we setting the standard or instead attempting to sustain a number of
>> "AS that are in compliance with the RFC"?
>>
>>
>>
>> [image: Image removed by sender.]
>>
>> *Warren Parad*
>>
>> Founder, CTO
>>
>> Secure your user data with IAM authorization as a service. Implement
>> Authress
>> <https://nam06.safelinks.protection.outlook.com/?url=https%3A%2F%2Fauthress.io%2F&data=04%7C01%7Cpieter.kasselman%40microsoft.com%7C0d1e820fa1664a5bb1ab08d98fb54d4f%7C72f988bf86f141af91ab2d7cd011db47%7C1%7C0%7C637698831154760332%7CUnknown%7CTWFpbGZsb3d8eyJWIjoiMC4wLjAwMDAiLCJQIjoiV2luMzIiLCJBTiI6Ik1haWwiLCJXVCI6Mn0%3D%7C1000&sdata=lbb9cJl0VUcfBD9IwzKF4BeB5nnggZxLB1TwlZYdNK4%3D&reserved=0>
>> .
>>
>>
>>
>>
>>
>> On Wed, Oct 13, 2021 at 7:17 PM Mike Jones <Michael.Jones=
>> 40microsoft.com@dmarc.ietf.org> wrote:
>>
>> During today’s call, it was asked whether we should drop the OAuth 2.0
>> language that:
>>
>>          The client MUST NOT use the authorization code
>>
>>          more than once.  If an authorization code is used more than
>>
>>          once, the authorization server MUST deny the request and SHOULD
>>
>>          revoke (when possible) all tokens previously issued based on
>>
>>          that authorization code.”
>>
>>
>>
>> The rationale given was that enforcing one-time use is impractical in
>> distributed authorization server deployments.
>>
>>
>>
>> Thinking about this some more, at most, we should relax this to:
>>
>>          The client MUST NOT use the authorization code
>>
>>          more than once.  If an authorization code is used more than
>>
>>          once, the authorization server SHOULD deny the request and
>> SHOULD
>>
>>          revoke (when possible) all tokens previously issued based on
>>
>>          that authorization code.”
>>
>>
>>
>> In short, it should remain illegal for the client to try to reuse the
>> authorization code.  We can relax the MUST to SHOULD in the server
>> requirements in recognition of the difficulty of enforcing the MUST.
>>
>>
>>
>> Code reuse is part of some attack scenarios.  We must not sanction it.
>>
>>
>>
>>                                                           -- Mike
>>
>>
>>
>> _______________________________________________
>> OAuth mailing list
>> OAuth@ietf.org
>> https://www.ietf.org/mailman/listinfo/oauth
>> <https://nam06.safelinks.protection.outlook.com/?url=https%3A%2F%2Fwww.ietf.org%2Fmailman%2Flistinfo%2Foauth&data=04%7C01%7Cpieter.kasselman%40microsoft.com%7C0d1e820fa1664a5bb1ab08d98fb54d4f%7C72f988bf86f141af91ab2d7cd011db47%7C1%7C0%7C637698831154760332%7CUnknown%7CTWFpbGZsb3d8eyJWIjoiMC4wLjAwMDAiLCJQIjoiV2luMzIiLCJBTiI6Ik1haWwiLCJXVCI6Mn0%3D%7C1000&sdata=u3yNDEeIsFvqGwu3x8%2F22D25o3bVO9PkrBEA2IEKSzY%3D&reserved=0>
>>
>> _______________________________________________
>> OAuth mailing list
>> OAuth@ietf.org
>> https://www.ietf.org/mailman/listinfo/oauth
>> <https://nam06.safelinks.protection.outlook.com/?url=https%3A%2F%2Fwww.ietf.org%2Fmailman%2Flistinfo%2Foauth&data=04%7C01%7Cpieter.kasselman%40microsoft.com%7C0d1e820fa1664a5bb1ab08d98fb54d4f%7C72f988bf86f141af91ab2d7cd011db47%7C1%7C0%7C637698831154770299%7CUnknown%7CTWFpbGZsb3d8eyJWIjoiMC4wLjAwMDAiLCJQIjoiV2luMzIiLCJBTiI6Ik1haWwiLCJXVCI6Mn0%3D%7C1000&sdata=7JX5eYOgW7gjFIIySrFurb2%2B9dBhH4IAsXhIMkV%2FGps%3D&reserved=0>
>>
>> _______________________________________________
>> OAuth mailing list
>> OAuth@ietf.org
>> https://www.ietf.org/mailman/listinfo/oauth
>> <https://nam06.safelinks.protection.outlook.com/?url=https%3A%2F%2Fwww.ietf.org%2Fmailman%2Flistinfo%2Foauth&data=04%7C01%7Cpieter.kasselman%40microsoft.com%7C0d1e820fa1664a5bb1ab08d98fb54d4f%7C72f988bf86f141af91ab2d7cd011db47%7C1%7C0%7C637698831154770299%7CUnknown%7CTWFpbGZsb3d8eyJWIjoiMC4wLjAwMDAiLCJQIjoiV2luMzIiLCJBTiI6Ik1haWwiLCJXVCI6Mn0%3D%7C1000&sdata=7JX5eYOgW7gjFIIySrFurb2%2B9dBhH4IAsXhIMkV%2FGps%3D&reserved=0>
>>
>> _______________________________________________
>> OAuth mailing list
>> OAuth@ietf.org
>> https://www.ietf.org/mailman/listinfo/oauth
>> <https://nam06.safelinks.protection.outlook.com/?url=https%3A%2F%2Fwww.ietf.org%2Fmailman%2Flistinfo%2Foauth&data=04%7C01%7Cpieter.kasselman%40microsoft.com%7C0d1e820fa1664a5bb1ab08d98fb54d4f%7C72f988bf86f141af91ab2d7cd011db47%7C1%7C0%7C637698831154780256%7CUnknown%7CTWFpbGZsb3d8eyJWIjoiMC4wLjAwMDAiLCJQIjoiV2luMzIiLCJBTiI6Ik1haWwiLCJXVCI6Mn0%3D%7C1000&sdata=lJqE32wIC4OoFoYfUMYr8zd3pgEz2abBr2aga42rFsA%3D&reserved=0>
>>
>> _______________________________________________
>> OAuth mailing list
>> OAuth@ietf.org
>> https://www.ietf.org/mailman/listinfo/oauth
>> <https://nam06.safelinks.protection.outlook.com/?url=https%3A%2F%2Fwww.ietf.org%2Fmailman%2Flistinfo%2Foauth&data=04%7C01%7Cpieter.kasselman%40microsoft.com%7C0d1e820fa1664a5bb1ab08d98fb54d4f%7C72f988bf86f141af91ab2d7cd011db47%7C1%7C0%7C637698831154780256%7CUnknown%7CTWFpbGZsb3d8eyJWIjoiMC4wLjAwMDAiLCJQIjoiV2luMzIiLCJBTiI6Ik1haWwiLCJXVCI6Mn0%3D%7C1000&sdata=lJqE32wIC4OoFoYfUMYr8zd3pgEz2abBr2aga42rFsA%3D&reserved=0>
>>
>>
>> _______________________________________________
>> OAuth mailing listOAuth@ietf.orghttps://www.ietf.org/mailman/listinfo/oauth
>>
>>
>> -- https://danielfett.de
>>
>> _______________________________________________
>> OAuth mailing list
>> OAuth@ietf.org
>> https://www.ietf.org/mailman/listinfo/oauth
>>
> _______________________________________________
> OAuth mailing list
> OAuth@ietf.org
> https://www.ietf.org/mailman/listinfo/oauth
>

Re: [OAUTH-WG] [EXTERNAL] Re: Authorization code reuse and OAuth 2.1

Attachment: image001.jpg