Re: [OSPF] [Technical Errata Reported] RFC2328 (4022)

[Alia Atlas <[e-mail]>]

Thanks!


On Tue, Jun 24, 2014 at 4:23 PM, Acee Lindem <[e-mail]>
wrote:

> Hi Alia,
> As long as you are verifying these, I agree with Errata as well.
> Thanks,
> Acee
>
> On Jun 24, 2014, at 3:11 AM, RFC Errata System <[e-mail]>
> wrote:
>
> > The following errata report has been submitted for RFC2328,
> > "OSPF Version 2".
> >
> > --------------------------------------
> > You may review the report below and at:
> > http://www.rfc-editor.org/errata_search.php?rfc=2328&eid=4022
> >
> > --------------------------------------
> > Type: Technical
> > Reported by: Alexander Okonnikov <[e-mail]>
> >
> > Section: 10.5
> >
> > Original Text
> > -------------
> > When receiving an Hello Packet from a neighbor on a broadcast,
> > Point-to-MultiPoint or NBMA network, set the neighbor
> > structure's Neighbor ID equal to the Router ID found in the
> > packet's OSPF header. For these network types, the neighbor
> > structure's Router Priority field, Neighbor's Designated Router
> > field, and Neighbor's Backup Designated Router field are also
> > set equal to the corresponding fields found in the received
> > Hello Packet; changes in these fields should be noted for
> > possible use in the steps below. When receiving an Hello on a
> > point-to-point network (but not on a virtual link) set the
> > neighbor structure's Neighbor IP address to the packet's IP
> > source address.
> >
> > Corrected Text
> > --------------
> > When receiving an Hello Packet from a neighbor on a broadcast,
> > Point-to-MultiPoint or NBMA network, set the neighbor
> > structure's Neighbor ID equal to the Router ID found in the
> > packet's OSPF header. For broadcast and NBMA network types, the neighbor
> > structure's Router Priority field, Neighbor's Designated Router
> > field, and Neighbor's Backup Designated Router field are also
> > set equal to the corresponding fields found in the received
> > Hello Packet; changes in these fields should be noted for
> > possible use in the steps below. When receiving an Hello on a
> > point-to-point network (but not on a virtual link) set the
> > neighbor structure's Neighbor IP address to the packet's IP
> > source address.
> >
> > Notes
> > -----
> > This is unnecessary in case of Point-to-MultiPoint network type to hold
> neighbor's Router Priority, DR, and BDR values.
> >
> > Instructions:
> > -------------
> > This errata is currently posted as "Reported". If necessary, please
> > use "Reply All" to discuss whether it should be verified or
> > rejected. When a decision is reached, the verifying party (IESG)
> > can log in to change the status and edit the report, if necessary.
> >
> > --------------------------------------
> > RFC2328 (no draft string recorded)
> > --------------------------------------
> > Title               : OSPF Version 2
> > Publication Date    : April 1998
> > Author(s)           : J. Moy
> > Category            : INTERNET STANDARD
> > Source              : Open Shortest Path First IGP
> > Area                : Routing
> > Stream              : IETF
> > Verifying Party     : IESG
>
>