I-D ACTION:draft-ietf-pilc-link-arq-issues-03.txt

Internet-Drafts@ietf.org Mon, 27 August 2001 10:49 UTC

Message-Id: <200108271049.GAA10195@ietf.org>
Mime-Version: 1.0
Content-Type: Multipart/Mixed; Boundary="NextPart"
To: IETF-Announce:;;;@grc.nasa.gov;
Cc: pilc@grc.nasa.gov
From: Internet-Drafts@ietf.org
Reply-to: Internet-Drafts@ietf.org
Subject: I-D ACTION:draft-ietf-pilc-link-arq-issues-03.txt
Date: Mon, 27 Aug 2001 06:49:36 -0400
Sender: owner-pilc@grc.nasa.gov
Precedence: bulk
Status: RO
Content-Length: 2825
Lines: 87

A New Internet-Draft is available from the on-line Internet-Drafts directories.
This draft is a work item of the Performance Implications of Link Characteristics Working Group of the IETF.

	Title		: Advice to link designers on link Automatic Repeat 
                          reQues (ARQ)
	Author(s)	: G. Fairhurst, L. Wood
	Filename	: draft-ietf-pilc-link-arq-issues-03.txt
	Pages		: 25
	Date		: 24-Aug-01
	
This document provides advice to the designers of digital
communication equipment and link-layer protocols employing link
layer Automatic Repeat reQuest (ARQ) techniques.  This document
presumes that the designers wish to support Internet protocols, but
may be unfamiliar with the architecture of the Internet and with the
implications of their design choices on the performance and
efficiency of Internet traffic carried over their links.

A URL for this Internet-Draft is:
http://www.ietf.org/internet-drafts/draft-ietf-pilc-link-arq-issues-03.txt

Internet-Drafts are also available by anonymous FTP. Login with the username
"anonymous" and a password of your e-mail address. After logging in,
type "cd internet-drafts" and then
	"get draft-ietf-pilc-link-arq-issues-03.txt".

A list of Internet-Drafts directories can be found in
http://www.ietf.org/shadow.html 
or ftp://ftp.ietf.org/ietf/1shadow-sites.txt


Internet-Drafts can also be obtained by e-mail.

Send a message to:
	mailserv@ietf.org.
In the body type:
	"FILE /internet-drafts/draft-ietf-pilc-link-arq-issues-03.txt".
	
NOTE:	The mail server at ietf.org can return the document in
	MIME-encoded form by using the "mpack" utility.  To use this
	feature, insert the command "ENCODING mime" before the "FILE"
	command.  To decode the response(s), you will need "munpack" or
	a MIME-compliant mail reader.  Different MIME-compliant mail readers
	exhibit different behavior, especially when dealing with
	"multipart" MIME messages (i.e. documents which have been split
	up into multiple messages), so check your local documentation on
	how to manipulate these messages.
		
		
Below is the data which will enable a MIME compliant mail reader
implementation to automatically retrieve the ASCII version of the
Internet-Draft.
ftp://ftp.ietf.org/internet-drafts/draft-ietf-pilc-link-arq-issues-03.txt"><ftp://ftp.ietf.org/internet-drafts/draft-ietf-pilc-link-arq-issues-03.txt>