Re: [mpls] MPLS WG adoption call for draft-mirsky-mpls-p2mp-bfd

Greg Mirsky <gregimirsky@gmail.com> Tue, 20 November 2018 22:01 UTC

Return-Path: <gregimirsky@gmail.com>
X-Original-To: rtg-bfd@ietfa.amsl.com
Delivered-To: rtg-bfd@ietfa.amsl.com
Received: from localhost (localhost [127.0.0.1]) by ietfa.amsl.com (Postfix) with ESMTP id 49E19130E29; Tue, 20 Nov 2018 14:01:15 -0800 (PST)
X-Virus-Scanned: amavisd-new at amsl.com
X-Spam-Flag: NO
X-Spam-Score: -1.998
X-Spam-Level:
X-Spam-Status: No, score=-1.998 tagged_above=-999 required=5 tests=[BAYES_00=-1.9, DKIM_SIGNED=0.1, DKIM_VALID=-0.1, DKIM_VALID_AU=-0.1, FREEMAIL_FROM=0.001, HTML_MESSAGE=0.001, RCVD_IN_DNSWL_NONE=-0.0001, SPF_PASS=-0.001, URIBL_BLOCKED=0.001] autolearn=ham autolearn_force=no
Authentication-Results: ietfa.amsl.com (amavisd-new); dkim=pass (2048-bit key) header.d=gmail.com
Received: from mail.ietf.org ([4.31.198.44]) by localhost (ietfa.amsl.com [127.0.0.1]) (amavisd-new, port 10024) with ESMTP id FhwqMOcCQaAm; Tue, 20 Nov 2018 14:01:11 -0800 (PST)
Received: from mail-lj1-x230.google.com (mail-lj1-x230.google.com [IPv6:2a00:1450:4864:20::230]) (using TLSv1.2 with cipher ECDHE-RSA-AES128-GCM-SHA256 (128/128 bits)) (No client certificate requested) by ietfa.amsl.com (Postfix) with ESMTPS id 7B6D2130DFF; Tue, 20 Nov 2018 14:01:10 -0800 (PST)
Received: by mail-lj1-x230.google.com with SMTP id u6-v6so3038646ljd.1; Tue, 20 Nov 2018 14:01:10 -0800 (PST)
DKIM-Signature: v=1; a=rsa-sha256; c=relaxed/relaxed; d=gmail.com; s=20161025; h=mime-version:references:in-reply-to:from:date:message-id:subject:to :cc; bh=aC0h1vPBc6gfpGJ2LckAz51ZgEMnT4RRuApVGENeq8A=; b=jHwBNexq8X5hX6kKRMZOZQk6UF4N+IipXbrvgBvOklme0uP+ONNqNMHBJeSHmnH4LW ZpcOGucB/VHw2YE5IqUpaZsh46xNDzGvss5dUwKKoA+iVH8RNktDTemUf8B6LEIu1IX1 0tC0bhejwghRIE6qhZDidm2Yx+VvGpHAc+d+CvmKs6nwvIvYDNZTqeLnZeieaxUeN9cL ON6jE/kadh5xfWhC1AomEK1ONAqIs6y5FLoRdj5RrQZGc8Xo4+2ZDgfvxzF4aDc1jBAC M+B4hQzGvVwVHdJvrI3q4OVRosIsA7BIjyB/p82bmaXap6U0OFCRemZUBDpbSBv71QQz 2qcA==
X-Google-DKIM-Signature: v=1; a=rsa-sha256; c=relaxed/relaxed; d=1e100.net; s=20161025; h=x-gm-message-state:mime-version:references:in-reply-to:from:date :message-id:subject:to:cc; bh=aC0h1vPBc6gfpGJ2LckAz51ZgEMnT4RRuApVGENeq8A=; b=mphFl37tbVeERZ4EBYxLg6vAV8gqR5TTEt+qD+vdtdC4EJHOSgMRqqB9D18kKv+N+f q0SA3b6E++MMoV3ttANqWD3GCt28m4tK7/EdxbtbfOjJ6QdsMb2YyITskC5cFd4fUTD+ a2uH/JWKmoX94/xjevbWBV6vQxl/lT0KhaQPQHEzfoW+Bo8+gj4JXGBU8nfAEs5FnM+2 oj4y5W+Ocrq8CFfUaHlwDT9gS841TG/P3MipelLWAErZYQx8YcL5N3HQY4YOxzWPJu0k h8FORqzrma4vRhrQ8SycaqcGhzqgfsvrkmO0qylExnCRdHnc7KMNqyM7fVtQGYbS/5yF oa1Q==
X-Gm-Message-State: AA+aEWab0nHm7L9DPETU0pTiSFXdgprQ2yFbE7i3rhx/NEpmwhEmn4mY HXuwNKvZTIKdtmT5D1e0MGVOdWAaB/SJfTRwjgc=
X-Google-Smtp-Source: AFSGD/UyC4OETb54DpijBF1OoVOGtdK3ZPojy5naYQu6qJ/YjLxVcY/khYSgUd/aiSZ9z42HUPvJqR6Jqcory1ZfGP8=
X-Received: by 2002:a2e:851a:: with SMTP id j26-v6mr2222938lji.163.1542751268404; Tue, 20 Nov 2018 14:01:08 -0800 (PST)
MIME-Version: 1.0
References: <CA+RyBmVDvb6t3rh3sZUHrsApfJRb9A8GCLxPCe9b=tcvZz6J3w@mail.gmail.com> <15CB10A6-6AF4-460F-A71D-56F28D9D7784@cisco.com> <CA+RyBmVbWkDK3o2ZREv2jat++O3hNWBA4_Yn-ynyDdjpG+GjXw@mail.gmail.com> <5BFD9FF7-DBF8-48E6-BF45-1D29AFB90034@cisco.com> <CA+RyBmVbRw3BsE8OdSmHcfasBi0te9BXvVC+8Cq9Zj-Asqc08Q@mail.gmail.com> <81371D06-2A1A-480F-B65D-FAF04E408A04@cisco.com>
In-Reply-To: <81371D06-2A1A-480F-B65D-FAF04E408A04@cisco.com>
From: Greg Mirsky <gregimirsky@gmail.com>
Date: Tue, 20 Nov 2018 14:00:57 -0800
Message-ID: <CA+RyBmU2a-rcJ-BeHfYJ4PYqtxKx6s0J4+kpJxL3bUVCqXDz=w@mail.gmail.com>
Subject: Re: [mpls] MPLS WG adoption call for draft-mirsky-mpls-p2mp-bfd
To: "Carlos Pignataro (cpignata)" <cpignata@cisco.com>
Cc: mpls-chairs@ietf.org, mpls@ietf.org, rtg-bfd WG <rtg-bfd@ietf.org>
Content-Type: multipart/alternative; boundary="000000000000548c5a057b1fc5d3"
Archived-At: <https://mailarchive.ietf.org/arch/msg/rtg-bfd/0m9zLD5s_hhrs7C7nxqNcHduaHA>
X-BeenThere: rtg-bfd@ietf.org
X-Mailman-Version: 2.1.29
Precedence: list
List-Id: "RTG Area: Bidirectional Forwarding Detection DT" <rtg-bfd.ietf.org>
List-Unsubscribe: <https://www.ietf.org/mailman/options/rtg-bfd>, <mailto:rtg-bfd-request@ietf.org?subject=unsubscribe>
List-Archive: <https://mailarchive.ietf.org/arch/browse/rtg-bfd/>
List-Post: <mailto:rtg-bfd@ietf.org>
List-Help: <mailto:rtg-bfd-request@ietf.org?subject=help>
List-Subscribe: <https://www.ietf.org/mailman/listinfo/rtg-bfd>, <mailto:rtg-bfd-request@ietf.org?subject=subscribe>
X-List-Received-Date: Tue, 20 Nov 2018 22:01:16 -0000

Hi Carlos,
apologies for the prolonged silence. Thank you for your consideration of
the proposed new text and the acknowledgment that we're converging. Please
find the new comments in-line tagged GIM3>>.

Regards,
Greg

On Wed, Nov 7, 2018 at 8:52 PM Carlos Pignataro (cpignata) <
cpignata@cisco.com> wrote:

> [Greg, Loa, responding to both on this single email reply]
>
> Hi, Loa,
>
> On Nov 6, 2018, at 1:49 PM, Loa Andersson <loa@pi.nu> wrote:
>
> Carlos,
>
> Since the a wg adoption poll I read your comments as that we are doing
> progress, and that we can address the rest during the wg process,
> correct?
>
>
> I agree we are making progress, thank you. Most questions can be addressed
> later, but only the very first question goes to the heart of an adoption
> poll. If we can close on that, the rest can be addressed later (note the
> same question is related also to the last question.)
>
> /Loa
>
>
> Hi, Greg,
>
> Thank you very much for your responses — please see inline.
>
> On Nov 6, 2018, at 7:18 PM, Greg Mirsky <gregimirsky@gmail.com> wrote:
>
> Hi Carlos,
> thank you for your consideration of my responses. Glad that we're
> converging. Please find additional notes in-line tagged GIM2>>.
>
> Regards,
> Greg
>
> On Tue, Nov 6, 2018 at 12:11 AM Carlos Pignataro (cpignata) <
> cpignata@cisco.com> wrote:
>
>> Hi Greg,
>>
>> Many thanks for your response and suggestions! Please see inline.
>>
>> On Nov 2, 2018, at 6:13 AM, Greg Mirsky <gregimirsky@gmail.com> wrote:
>>
>> Hi Carlos,
>> thank you for your comments. Please find my notes, answers in-line tagged
>> GIM>>.
>>
>> Regards,
>> Greg
>>
>> On Thu, Oct 25, 2018 at 8:47 PM Carlos Pignataro (cpignata) <
>> cpignata@cisco.com> wrote:
>>
>>> Hi,
>>>
>>> Cc BFD WG
>>>
>>> It would be useful to understand the use case motivation or
>>> applicability of this draft, other than it can be done.
>>>
>> GIM>>  The motivation can be seen in the following (from another draft
>> that discusses OAM over G-ACh:
>>   In some
>>    environments, the overhead of extra IP/UDP encapsulations may be
>>    considered as overburden and make using more compact G-ACh
>>    encapsulation attractive.
>> Will add text in the draft.
>>
>>
>> CMP: Thank you very much. This is a good start, although it would be
>> useful to add precision into which environments specifically, and the
>> burden comparison between IP/UDP and G-ACh.
>>
> GIM2>> Thank you for agreeing to this, and I've added the text in the
> working verion. Will work on improving the text in the meantime.
>
>
> CMP: Sorry if I was not clear. Like I said, this is a good start and
> probably necessary (but not sufficient) text.
>
> CMP: Which environments specifically? At this point, the scope and target
> of the work is not clear to me. That was my question. Is this for MPLS-TP
> P2MP? If so, the underlying seems to have stalled:
> https://datatracker.ietf.org/doc/rfc7167/referencedby/
> CMP: I think these two questions should be answered: 1. What specific
> environments? 2. How current solutions do not solve it (i.e., what is and
> can we quantify the overburden)?
>
GIM3>> Andy Malis has pointed to the requirements for proactive OAM,
particularly monitoring path continuity, listed in Section 4.1 RFC 4687.
These are not specific to MPLS-TP but to OAM over p2mp MPLS LSP. The
following text has been added to the Security Considerations section in the
recenly uploaded -04 version of the draft:
   Also, BFD for p2mp MPLS LSP MUST follow the requirements listed in
   section 4.1 [RFC4687] to avoid congestion in the control plane or the
   data plane caused by the rate of generating BFD control packets.  An
   operator SHOULD consider the amount of extra traffic generated by
   p2mp BFD when selecting the interval at which the MultipointHead will
   transmit BFD control packets.  Also, the operator MAY consider the
   size of the packet the MultipointHead transmits periodically as using
   IP/UDP encapsulation adds up to 28 octets, which is more than 50% of
   BFD control packet length, comparing to G-ACh encapsulation.

>
>
>>
>>> I’m also increasingly concerned by confusing scope and definition of
>>> specifications.
>>>
>>> For example:
>>>
>>> https://tools.ietf.org/html/draft-mirsky-mpls-p2mp-bfd-04#section-3.2
>>>
>>> 3.2.  Non-IP Encapsulation of Multipoint BFD
>>>
>>>    Non-IP encapsulation for multipoint BFD over p2mp MPLS LSP MUST use
>>>    Generic Associated Channel (G-ACh) Label (GAL) [RFC5586] at the
>>>    bottom of the label stack followed by Associated Channel Header
>>>    (ACH).  Channel Type field in ACH MUST be set to BFD CV [RFC6428].
>>>
>>>
>>> First, there’s no definition for non-IP BFD in RFC 5586 — only in RFC
>>> 5885.
>>>
>> GIM>> RFC 5586 defined the use of GAL. I think that this reference is
>> appropriate. I agree that the second reference should be to RFC 5885, not
>> RFC 6428. Will make the change.
>>
>>
>> CMP: Thank you. However, RFC 5885 is in the context of PW VCCV — is there
>> a missing definition in the specs for BFD over G-ACh generically?
>>
> GIM2>> I think that the following quote from RFC 5586 set the relationship
> between Channel Type field in PW ACH and G-ACh:
>     Channel Types for the Associated Channel Header are allocated from
>     the IANA "PW Associated Channel Type" registry [RFC4446].
> I understand that that there's one and only one registry and channel
> values are equally applicable to PW ACH and G-ACh. And full name of the
> registry now is MPLS Generalized Associated Channel (G-ACh) Types
> (including Pseudowire Associated Channel Types).
>
>
> CMP: That is correct. I was curious as to whether additional control plane
> is needed for this support.
>
>
>> Second, the specification in RFC 6428 applies to MPLS Transport Profile
>>> only. NOT for MPLS, and explicitly NOT for P2MP!
>>>
>>> https://tools.ietf.org/html/rfc6428#section-1
>>>
>>>    This document specifies the BFD extension and behavior to satisfy the
>>>    CC, proactive CV monitoring, and the RDI functional requirements for
>>>    both co-routed and associated bidirectional LSPs.  Supported
>>>    encapsulations include Generic Associated Channel Label (GAL) /
>>>    Generic Associated Channel (G-ACh), Virtual Circuit Connectivity
>>>    Verification (VCCV), and UDP/IP.  Procedures for unidirectional
>>>    point-to-point (P2P) and point-to-multipoint (P2MP) LSPs are for
>>>    further study.
>>>
>>>
>>> So, no, this does not work.
>>>
>>> RFC 6428 does not have scope for P2MP.
>>> And RFC 5586 does not specify anything for BFD. Instead, what needs to
>>> be cited (appropriately and expanded) is RFC 5885
>>>
>> GIM>> RFC 5586 specifies the use of GAL and G-ACh and the reference is
>> used in this context.
>>
>>
>> CMP: This is the same comment as above.
>>
>>
>>> https://tools.ietf.org/html/rfc6428#section-4
>>>       RFC 5884 - BFD CC in UDP/IP/LSP
>>>       RFC 5885 - BFD CC in G-ACh
>>>
>> GIM>> I'd point that it is for p2p BFD CC, and p2mp BFD uses different
>> from p2p BFD method to demultiplex BFD control packets.
>>
>>
>>
>> CMP: Apologies I did not understand this response.
>>
> GIM2>> Apologies for sending partial explanation. P2MP BFD cannot use Your
> Discriminator field to demultiplex the recieved BFD control packet. BFD for
> Multipoint Networks defines the special procedure that requires the use of
> Source ID. When the encapsulation of BFD control packet does not include
> IP/UDP header, the Source ID can be provided as Source MEP-ID TLV in
> MPLS-TP BFD CV. This draft proposes the new IP Address TLV for that. Thus I
> have to correct myself and re-state the earlier text in the draft that the
> value in the Channel Type filed of G-ACh must be MPLS-TP CV (0x0023).
>
>
> CMP: I understood you said above that the reference to RFC6428 was
> incorrect.
>
> CMP: Now, just to understand the approach:
>
> CMP: Are you suggesting that the IP header is not used with BFD and
> instead a new TLV (of which information structure?) carries the IP address
> that you removed before? Seems like a musical-chairs arrangement of the
> data. I may very likely be missing something. Apologies in advance if that
> is the case.
>
> CMP: Also, is the applicability MPLS-TP? What is the normative reference
> for MPLS-TP P2MP?
>
GIM3>> I should have explained why I think that MPLS-TP CV message (0x0023)
type is more suitable than BFD Control, PW-ACH encapsulation (without
IP/UDP Headers) (0x0007). The latter includes only the BFD control packet
while the format of the former includes Source MEP-ID TLV that immediately
follows the BFD control packet. And with the new proposed IP Address TLV
the 0x0023 G-ACh channel works better for p2mp BFD over p2mp MPLS LSP.
Alternative, of course, would be to define the new G-ACh type for p2mp BFD
over p2mp MPLS LSP.

>
> Thanks,
>
> Carlos.
>
>
>> CMP: Thanks again for considering the comment to improve the document.
>>
>> Thanks,
>>
>> Carlos.
>>
>>
>>       RFC 5085 - UDP/IP in G-ACh
>>>        MPLS-TP - CC/CV in GAL/G-ACh or G-ACh
>>>
>>>
>>>
>>> Thanks,
>>>
>>> — Carlos Pignataro
>>>
>>> On Oct 13, 2018, at 4:24 PM, Greg Mirsky <gregimirsky@gmail.com> wrote:
>>>
>>> Dear WG Chairs, et al.,
>>> as the author of the BFD for Multipoint Networks over
>>> Point-to-Multi-Point MPLS LSP (draft-mirsky-mpls-p2mp-bfd) I would like to
>>> ask you to consider WG adoption call of the draft. The document addresses
>>> non-IP encapsulation of p2mp BFD over MPLS LSP that may be useful if the
>>> overhead of IP, particularly IPv6, encapsulation is the concern. The base
>>> specification of BFD for Multipoint Networks is at this time in IESG LC.
>>>
>>> Regards,
>>> Greg
>>> _______________________________________________
>>> mpls mailing list
>>> mpls@ietf.org
>>> https://www.ietf.org/mailman/listinfo/mpls
>>>
>>>
>>
>