Re: [v6ops] New Version Notification for draft-v6ops-rfc7084-bis-00.txt

[JORDI PALET MARTINEZ <[e-mail]>]

Hi all,

I’ve submitted WG 00 for this document.

https://datatracker.ietf.org/doc/draft-v6ops-rfc7084-bis

I tried to incorporate all the inputs that I captured in the meeting, hopefully didn’t miss anything!, plus some minor edits.

Here is the summary for the changes:

1) Added an annex (A) regarding the code considerations as I mention in my presentation.
2) Added an annex (B) with the changes from the original RFC7084.
3) Transition mechanisms in alphabetical order.
4) Changed the IPv6-in-IPv4 transition mechanism (6RD and 6in4) to MAY instead of SHOULD.
5) Added a new section regarding IPv4 multicast support in IPv6-only-WAN.
6) Added some text regarding the PCP support to learn PLAT info in 464XLAT (RFC 7225).

I’ve one question for the WG.

In all the IPv4-in-IPv6 transition mechanisms, I’m requiring:
“The CE router MUST support the DHCPv4-over-DHCPv6 (DHCP4o6) transport described in [RFC7341].”

I got a comment that this is not needed, however, my feeling is that the configuration of certain IPv4 parameters for the CPE, during the transition, are still needed and the ISP may need that.

So, the question is, what do you think about this?

Please, note that the original RFC7084 didn’t considered this (RFC7341 didn’t exist when it was published), so the actual version is requesting this not just for the new supported transition mechanisms (lw4o6, MAP T/E, 464XLAT), but also for DS-Lite.

Please provide inputs ASAP. I will like to avoid having this document sleeping for too many weeks, and my goal is to publish a new version in about 2 weeks with any comments received.

Regards,
Jordi
 

-----Mensaje original-----
De: <[e-mail]>
Responder a: <[e-mail]>
Fecha: domingo, 2 de abril de 2017, 22:57
Para: Jordi Palet <[e-mail]>, Jordi Palet Martinez <[e-mail]>
Asunto: New Version Notification for draft-v6ops-rfc7084-bis-00.txt

    
    A new version of I-D, draft-v6ops-rfc7084-bis-00.txt
    has been successfully submitted by Jordi Palet Martinez and posted to the
    IETF repository.
    
    Name:		draft-v6ops-rfc7084-bis
    Revision:	00
    Title:		Basic Requirements for IPv6 Customer Edge Routers
    Document date:	2017-03-31
    Group:		Individual Submission
    Pages:		29
    URL:            https://www.ietf.org/internet-drafts/draft-v6ops-rfc7084-bis-00.txt
    Status:         https://datatracker.ietf.org/doc/draft-v6ops-rfc7084-bis/
    Htmlized:       https://tools.ietf.org/html/draft-v6ops-rfc7084-bis-00
    Htmlized:       https://datatracker.ietf.org/doc/html/draft-v6ops-rfc7084-bis-00
    
    
    Abstract:
       This document specifies requirements for an IPv6 Customer Edge (CE)
       router.  Specifically, the current version of this document focuses
       on the basic provisioning of an IPv6 CE router and the provisioning
       of IPv6 hosts attached to it.  The document also covers several
       transition technologies, as required in a world where IPv4 addresses
       are no longer available, so hosts in the customer LANs with IPv4-only
       or IPv6-only applications or devices, requiring to communicate with
       IPv4-only services at the Internet, are able to do so.  The document
       obsoletes RFC 7084.
    
                                                                                      
    
    
    Please note that it may take a couple of minutes from the time of submission
    until the htmlized version and diff are available at tools.ietf.org.
    
    The IETF Secretariat
    
    
    





**********************************************
IPv4 is over
Are you ready for the new Internet ?
http://www.consulintel.es
The IPv6 Company

This electronic message contains information which may be privileged or confidential. The information is intended to be for the use of the individual(s) named above. If you are not the intended recipient be aware that any disclosure, copying, distribution or use of the contents of this information, including attached files, is prohibited.