Re: [xml2rfc] Adding an anchor to references?

[Julian Reschke <[e-mail]>]

On 04.02.2020 22:26, Robert Moskowitz wrote:
> I have used:
>
>      <xi:include
> href="https://xml2rfc.tools.ietf.org/public/rfc/bibxml7/reference.DOI.10.6028/NIST.SP.800-56Cr1.xml?anchor=NIST.SP.800-56Cr1"/>
>
>
> where I then reference this with
>
> <xref target="NIST.SP.800-56Cr1" format="default"> </xref>
>
> So I tried that with a regular Internet draft:
>
> <xi:include
> href="https://xml2rfc.tools.ietf.org/public/rfc/bibxml3/reference.I-D.moskowitz-hip-hierarchical-hit.xml?anchor=hierarchical-hit"/>
>
>
> But it did not work.

Whether the anchor renaming works depends on the service generating the
reference, not the vocabulary.

The different "folders" on tools.ietf.org are backed by different code,
so they do not behave the same.

> draft-moskowitz-tmrid-crowd-sourced-rid-00.xml(0): Error: IDREF
> attribute target references an unknown ID "hierarchical-hit", at None
>
> I did some looking into RFC 7991
> (https://greenbytes.de/tech/webdav/rfc7991.html#XInclude) and perhaps I
> should be using
>
> <displayreference target="I-D.moskowitz-hip-hierarchical-hit"
> to="hierarchical-hit"/>
>
> Somewhere in the <back> section?  Would that come before or after the
> xi:include?

See <https://greenbytes.de/tech/webdav/rfc7991.html#element.back>. So
yes, as (first) child element of <back>.

Best regards, Julian