RE: [AVT] I-D ACTION:draft-ietf-avt-rfc2190-to-historic-05.txt

BTW if you really mean to point to the 1998 version, the URL is:
http://www.itu.int/rec/T-REC-H.263-199802-S/en

Other specific-version URLs can be obtained from the general H.263 page pointed out by Gary.

Simão 

-----Original Message-----
From: Gary Sullivan [mailto:garysull@windows.microsoft.com] 
Sent: 10 May 2006 22:13
To: Even, Roni
Cc: avt@ietf.org
Subject: RE: [AVT] I-D ACTION:draft-ietf-avt-rfc2190-to-historic-05.txt 

Roni et al,

A minor nit-pick about second referenced document in this I-D:

The I-D says that the referenced document is "ITU Recommendation H.263P".

Actually, I think the "P" does not belong there.  There is no "P" in the official title of the ITU-T standard.  This is simply a reference to the
1998 version of ITU-T Rec. H.263.

(FYI: There have also been a couple of other versions since then.  The current version is dated 01/2005.  See http://www.itu.int/rec/T-REC-H.263.  Also note that ITU standards can be downloaded for free by registering at http://ecs.itu.ch/cgi-bin/ebookshop before downloading.)

Best Regards,

Gary Sullivan

+> -----Original Message-----
+> From: Internet-Drafts@ietf.org [mailto:Internet-Drafts@ietf.org]
+> Sent: Wednesday, May 10, 2006 12:50 PM
+> To: i-d-announce@ietf.org
+> Cc: avt@ietf.org
+> Subject: [AVT] I-D ACTION:draft-ietf-avt-rfc2190-to-historic-05.txt
+> 
+> A New Internet-Draft is available from the on-line Internet-Drafts 
+> directories.
+> This draft is a work item of the Audio/Video Transport Working Group 
+> of the IETF.
+> 
+> 	Title		: RTP Payload Format for H.263 using 
+> RFC2190 to Historic status
+> 	Author(s)	: R. Even
+> 	Filename	: draft-ietf-avt-rfc2190-to-historic-05.txt
+> 	Pages		: 9
+> 	Date		: 2006-5-10
+> 	
+> The first RFC that describes RTP payload format for H.263 is RFC2190.
+> This specification discusses why to move this RFC to historic status.
+> 
+> A URL for this Internet-Draft is:
+> http://www.ietf.org/internet-drafts/draft-ietf-avt-rfc2190-to
+> -historic-05.txt
+> 
+> To remove yourself from the I-D Announcement list, send a message to 
+> i-d-announce-request@ietf.org with the word unsubscribe in the body 
+> of the message.
+> You can also visit
+> https://www1.ietf.org/mailman/listinfo/I-D-announce
+> to change your subscription settings.
+> 
+> 
+> Internet-Drafts are also available by anonymous FTP. Login 
+> with the username
+> "anonymous" and a password of your e-mail address. After logging in,
+> type "cd internet-drafts" and then
+> 	"get draft-ietf-avt-rfc2190-to-historic-05.txt".
+> 
+> A list of Internet-Drafts directories can be found in
+> http://www.ietf.org/shadow.html 
+> or ftp://ftp.ietf.org/ietf/1shadow-sites.txt
+> 
+> 
+> Internet-Drafts can also be obtained by e-mail.
+> 
+> Send a message to:
+> 	mailserv@ietf.org.
+> In the body type:
+> 	"FILE 
+> /internet-drafts/draft-ietf-avt-rfc2190-to-historic-05.txt".
+> 	
+> NOTE:	The mail server at ietf.org can return the document in
+> 	MIME-encoded form by using the "mpack" utility.  To use this
+> 	feature, insert the command "ENCODING mime" before the "FILE"
+> 	command.  To decode the response(s), you will need "munpack" or
+> 	a MIME-compliant mail reader.  Different MIME-compliant 
+> mail readers
+> 	exhibit different behavior, especially when dealing with
+> 	"multipart" MIME messages (i.e. documents which have been split
+> 	up into multiple messages), so check your local documentation on
+> 	how to manipulate these messages.
+> 		
+> 		
+> Below is the data which will enable a MIME compliant mail reader
+> implementation to automatically retrieve the ASCII version of the
+> Internet-Draft.
+> 

_______________________________________________
Audio/Video Transport Working Group
avt@ietf.org
https://www1.ietf.org/mailman/listinfo/avt

_______________________________________________
Audio/Video Transport Working Group
avt@ietf.org
https://www1.ietf.org/mailman/listinfo/avt