Re: [BEHAVE] AD Evaluation of draft-ietf-behave-ipfix-nat-logging-03

["Senthil Sivakumar (ssenthil)" <[e-mail]>]

Hi Spencer,
Thanks for the thorough review.
Please see inline for [Senthil]. If you agree, I will submit another version fixing all the issues raised and agreed upon. I will wait for your response.

Thanks
Senthil

From: Spencer Dawkins <[e-mail]<mailto:[e-mail]>>
Date: Thursday, May 1, 2014 4:25 PM
To: "[e-mail]<mailto:[e-mail]>" <[e-mail]<mailto:[e-mail]>>
Cc: "[e-mail]<mailto:[e-mail]>" <[e-mail]<mailto:[e-mail]>>
Subject: AD Evaluation of draft-ietf-behave-ipfix-nat-logging-03
Resent-From: <[e-mail]<mailto:[e-mail]>>
Resent-To: <[e-mail]<mailto:[e-mail]>>, Senthil Sivakumar <[e-mail]<mailto:[e-mail]>>
Resent-Date: Thursday, May 1, 2014 4:26 PM

Dear draft-ietf-behave-ipfix-nat-logging Authors,

I've completed my AD evaluation for this draft. I found some things I'd like to see changed before proceeding, but most are editorial. Please take a look, and let me know what you think.

My notes follow ... you should be able to find my questions and comments by searching for "SD:".

Thanks,

Spencer

In the Abstract

   NAT devices are required to log events like creation and deletion of
                   ^^^^^^^^
SD: Is this required, like, legally required, or ? Is it more like "Operators need NAT devices to log events ..."?
[Senthil] : It is the later, the network operators require the NAT devices to be able to log events.


   translations and information about the resources it is managing.  The
   logs are required in many cases to identify an attacker or a host
   that was used to launch malicious attacks and/or for various other
   purposes of accounting.  Since there is no standard way of logging
   this information, different NAT devices behave differently and hence
                               ^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^
SD: Is this "different NAT devices log this information differently"?
[Senthil] Correct, as the sentence says, "Since there is no standard way…", each NAT device logs information in its own proprietary format.



   it is difficult to expect a consistent behavior.  The lack of a
   consistent way makes it difficult to write the collector applications
   that would receive this data and process it to present useful
   information.  This document describes the information that is
   required to be logged by the NAT devices.
   ^^^^^^^^^^^^^^^^^^^^^^^^
SD: Same as previous question - is this "logged by"?

[Senthil] If a NAT device is logging events, these are the requirements that a NAT device should adhere to.


2.  Introduction

   The IPFIX Protocol [RFC5101bis] defines a generic push mechanism for
   exporting information and events.  The IPFIX Information Model
   [IPFIX-IANA] defines a set of standard Information Elements (IEs)
   which can be carried by the IPFIX protocol.  This document details
   the IPFIX Information Elements(IEs) that are required for logging by
   a NAT device.  The document will specify the format of the IE's that
   are required to be logged by the NAT device and all the optional
       ^^^^^^^^^^^^^^^^^^^^^
SD: Now that we're in the document body, if this is required, shouldn't there be a reference to where the requirements are stated?
[Senthil] This is the document that is specifying those requirements. Do you have any other suggestions of wording instead of "required by", would it be fine if I change the sentence from
"required to be logged" to "SHOULD be logged"?


   fields.  The fields specified in this document are gleaned from
   [RFC4787] and [RFC5382].

   Test [3GPP]
   ^^^^^^^^^^^
SD: Is something missing here? It's just the word "Test" and a reference.
[Senthil] Agree. I will remove this.



   This document and [I-D.behave-syslog-nat-logging] are provided in
   order to standardize the events and parameters to be recorded, using
   IPFIX [RFC5101bis] and SYSLOG [RFC5424]respectively.

3.  Scope

   This document provides the information model to be used for logging
   the NAT devices including Carrier Grade NAT (CGN) events.  This
                   ^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^
SD: This sentence seems somewhat turned around - "logging events", not "logging the NAT devices".
[Senthil] Agree, I will change this to "logging the NAT events".


   document focuses exclusively on the specification of IPFIX IE's.
   This document does not provide guidance on the transport protocol
   like TCP, UDP or SCTP that is to be used to log NAT events.  The log
   events SHOULD NOT be lost but the choice of the actual transport
   protocol is beyond the scope of this document.

SD: I'm not understanding why this last sentence is needed, especially with a normative requirement for what you do when you are doing something outside the scope of the document ...
[Senthil] Are you objecting to the second part of the last sentence "the choice of actual transport…", I think the requirement is that the LOG events should not be lost is valid.

   The existing IANA IPFIX IEs registry [IPFIX-IANA] already has
   assignments for many NAT logging events.  For convenience, this
   document uses those same IEs.  However, as stated earlier, this
   document is not defining IPFIX or NetFlow v9 as the framework for
   logging.  Rather, the information contained in these elements is

SD: I got lost on "these elements" - is that "the elements in the existing registry"
[Senthil] Yes. How about "Rather, the information elements as defined in the IPFIX-IANA registry is within the scope of this document"?


   within the scope of this document.

   This document assumes that the NAT device will use the existing IPFIX
   framework to send the log events to the collector.  This would mean
   that the NAT device will specify the template that it is going to use
   for each of the events.  The templates can be of varying length and
   there could be multiple templates that a NAT device could use to log
   the events.

   The implementation details of the collector application is beyond the
   scope of this document.

   The optimization of logging the NAT events are left to the
                                              ^^^
   implementation and are beyond the scope of this document.
                      ^^^
SD: It's a nit, but those "are"s should be "is"s.
[Senthil] Ok.



4.  Applicability

   NAT logging based on IPFIX uses binary encoding and hence is very
   efficient.  IPFIX based logging is recommended for environments where
   a high volume of logging is required, for example, where per-flow
   logging is needed.  However, IPFIX based logging requires a collector
   that processes the binary data and requires a network management
   application that converts this binary data to a human readable
   format.

5.  Event based logging

   An event in a NAT device can be viewed as a happening as it relates
                                               ^^^^^^^^^
SD: Is this "a state transition"? I found "a happening" somewhat odd.
[Senthil] Yes, I can rephrase this as "viewed as a state transition as it relates to" or "viewed as an action as it relates to", if that is ok.


   to the management of NAT resources.  The creation and deletion of NAT
   sessions and bindings are examples of events as it results in the
   resources (addresses and ports) being allocated or freed.  The events
   can happen either through the processing of data packets flowing
   through the NAT device or through an external entity installing
   policies on the NAT router or as a result of an asynchronous event
   like a timer.  The list of events are provided in Section 4.1.  Each
   of these events SHOULD be logged, unless they are administratively
   prohibited.  A NAT device MAY log these events to multiple collectors
   if redundancy is required.  The network administrator will specify
   the collectors to which the log records are to be sent.

   A collector may receive NAT events from multiple CGN devices and
   should be able to distinguish between the devices.  Each CGN device
   ^^^^^^
SD: I'm not sure why this isn't a SHOULD, or even a MUST.

   should have a unique source ID to identify themselves.  The source ID
   ^^^^^^
SD: Again, I'm not sure why this isn't a SHOULD, or even a MUST.

[Senthil] Well, this is NOT a statement for a NAT device, instead it is a collector that some application writer will
develop.


   is part of the IPFIX template and data exchange.

   Prior to logging any events, the NAT device MUST send the template of
   the record to the collector to advertise the format of the data
   record that it is using to send the events.  The templates can be
   exchanged as frequently as required given the reliability of the
   connection.  There SHOULD be a configurable timer for controlling the
   template refresh.  NAT device SHOULD combine as many events as
   possible in a single packet to effectively utilize the network
   bandwidth.

5.1.  Logging of destination information

   Logging of destination information in a NAT event has been discussed
   in [RFC6302] and [RFC6888].  Logging of destination information
   increases the size of each record and increases the need for storage
   considerably.  It increases the number of log events generated
   because when the same user connects to a different destination, it
   results in a log record per destination address.  Logging of
   destination information also results in the loss of privacy and hence
   should be done with caution.  However, this draft provides the
   necessary fields to log the destination information in cases where
   they are required to be logged.

5.2.  Information Elements

   The templates could contain a subset of the Information Elements(IEs)
   shown in Table 1 depending upon the event being logged.  For example
   a NAT44 session creation template record will contain,
                                            ^^^^
SD: Is this the only possible NAT44 template? If so, fine, but if not, perhaps "could contain", or "typically contains"?

[Senthil] Yes, this is all the information that a NAT44 need to export as it is the least common denominator.


   {sourceIPv4Adress, postNATSourceIPv4Address, destinationIpv4Address,
   postNATDestinationIPv4Address, sourceTransportPort,
   postNAPTSourceTransportPort, destinationTransportPort,
   postNAPTDestTransportPort, internalAddressRealm, natEvent, timeStamp}

   An example of the actual event data record is shown below - in a
   readable form

   {192.168.16.1, 201.1.1.100, 207.85.231.104, 207.85.231.104, 14800,
   1024, 80, 80, 0, 1, 09:20:10:789}

   A single NAT device could be exporting multiple templates and the
   collector should support receiving multiple templates from the same
   source.observationTimeMilliseconds

   The following is the table of all the IE's that a CGN device would
   need to export the events.  The formats of the IE's and the IPFIX IDs
   are listed below.

SD: I noticed that some IEs below have a name that matches http://www.iana.org/assignments/ipfix/ipfix.xhtml#ipfix-information-elements for the same IPFIX ID number, but others do not ("timeStamp" here doesn't match "observationTimeMilliseconds", but both are IPFIX ID 323, aren't they?) Is there a reason to use names that don't match the IANA registry?

[Senthil] Good question, in case of timeStamp, I was looking for something that already existed in the IPFIX registry rather than asking for a new one. However, the terminology of "observationTimeMilliseconds" is not the terminology that we use in the NAT drafts/rfc's. So I am open to suggestions here. I can clarify in the description that is called observationTimeMilliSeconds". The other field is internalAddressRealm and externalAddresRealm, this is the terminology that we used in NAT MIB, syslog and other documents. However, when we defined the IPFIX IE, we didn’t stick to the same terminology, so I don’t know if I can go and ask the IPFIX IANA to change the name. Again I am open to suggestions, the dillema is whether I should stick to the existing IPFIX IANA terminology or the behave documents terminology.


   +----------------------------------+--------+-------+---------------+
   |            Field Name            |   Size |  IANA |  Description  |
   |                                  | (bits) | IPFIX |               |
   |                                  |        |    ID |               |
   +----------------------------------+--------+-------+---------------+
   |            timeStamp             |     64 |   323 |  System Time  |
   |                                  |        |       |    when the   |
   |                                  |        |       |     event     |
   |                                  |        |       |    occured.   |
   |          natInstanceId           |     32 |   TBD |  NAT Instance |
   |                                  |        |       |   Identifier  |
   |              vlanID              |     16 |    58 |   VLAN ID in  |
   |                                  |        |       |    case of    |
   |                                  |        |       |  overlapping  |
   |                                  |        |       |    networks   |
   |           ingressVRFID           |     32 |   234 |   VRF ID in   |
   |                                  |        |       |    case of    |
   |                                  |        |       |  overlapping  |
   |                                  |        |       |    networks   |
   |        sourceIPv4Address         |     32 |     8 |  Source IPv4  |
   |                                  |        |       |    Address    |
   |     postNATSourceIPv4Address     |     32 |   225 |   Translated  |
   |                                  |        |       |  Source IPv4  |
   |                                  |        |       |    Address    |
   |        protocolIdentifier        |      8 |     4 |   Transport   |
   |                                  |        |       |    protocol   |
   |       sourceTransportPort        |     16 |     7 |  Source Port  |
   |   postNAPTsourceTransportPort    |     16 |   227 |   Translated  |
   |                                  |        |       |  Source port  |
   |      destinationIPv4Address      |     32 |    12 |  Destination  |
   |                                  |        |       |  IPv4 Address |
   |  postNATDestinationIPv4Address   |     32 |   226 |   Translated  |
   |                                  |        |       |      IPv4     |
   |                                  |        |       |  destination  |
   |                                  |        |       |    address    |
   |     destinationTransportPort     |     16 |    11 |  Destination  |
   |                                  |        |       |      port     |
   | postNAPTdestinationTransportPort |     16 |   228 |   Translated  |
   |                                  |        |       |  Destination  |
   |                                  |        |       |      port     |
   |        sourceIPv6Address         |     27 |   128 |  Source IPv6  |
   |                                  |        |       |    address    |
   |      destinationIPv6Address      |    128 |    28 |  Destination  |
   |                                  |        |       |  IPv6 address |
   |     postNATSourceIPv6Address     |    128 |   281 |   Translated  |
   |                                  |        |       |  source IPv6  |
   |                                  |        |       |    addresss   |
   |  postNATDestinationIPv6Address   |    128 |   282 |   Translated  |
   |                                  |        |       |  Destination  |
   |                                  |        |       |  IPv6 address |
   |       internalAddressRealm       |      8 |   229 |     Source    |
   |                                  |        |       | Address Realm |
   |       externalAddressRealm       |      8 |   TBD |  Destination  |
   |                                  |        |       | Address Realm |
   |             natEvent             |      8 |   230 | Type of Event |
   |          portRangeStart          |     16 |   361 |   Allocated   |
   |                                  |        |       |   port block  |
   |                                  |        |       |     start     |
   |           portRangeEnd           |     16 |   362 |   Allocated   |
   |                                  |        |       |   Port block  |
   |                                  |        |       |      end      |
   |            natPoolID             |     32 |   283 |    NAT pool   |
   |                                  |        |       |   Identifier  |
   |          natLimitEvent           |     32 |   TBD |  Limit event  |
   |                                  |        |       |   identifier  |
   +----------------------------------+--------+-------+---------------+

                      Table 1: Template format Table

5.3.  Definition of NAT Events

   The following are the list of NAT events and the proposed event
   values.  The list can be expanded in the future as necessary.  The
   data record will have the corresponding natEvent value to identify
   the event that is being logged.

                   +--------------------------+--------+
                   |        Event Name        | Values |
                   +--------------------------+--------+
                   |   NAT44 Session create   |      1 |
                   |   NAT44 Session delete   |      2 |
                   | NAT Addresses exhausted  |      3 |
                   |   NAT64 Session create   |      4 |
                   |   NAT64 Session delete   |      5 |
                   |     NAT44 BIB create     |      6 |
                   |     NAT44 BIB delete     |      7 |
                   |     NAT64 BIB create     |      8 |
                   |     NAT64 BIB delete     |      9 |
                   |   NAT ports exhausted    |     10 |
                   |      Quota exceeded      |     11 |
                   |  Address binding create  |     12 |
                   |  Address binding delete  |     13 |
                   |  Port block allocation   |     14 |
                   | Port block de-allocation |     15 |
                   |    Threshold reached     |     16 |
                   +--------------------------+--------+

                        Table 2: NAT Event ID table

5.4.  Quota exceeded Event types

   The following table shows the sub event types for the Quota exceeded
   or limits reached event.  The events that can be reported are the
   Maximum session entries limit reached, Maximum BIB entries limit
   reached, Maximum session/BIB entries per user limit reached and
   maximum subscribers or hosts limit reached.

            +---------------------------------------+--------+
            |       Quota Exceeded Event Name       | Values |
            +---------------------------------------+--------+
            |        Maximum Session entries        |      1 |
            |          Maximum BIB entries          |      2 |
            |        Maximum entries per user       |      3 |
            |  Maximum active hosts or subscribers  |      4 |
            |  Maximum fragments pending reassembly |      5 |
            +---------------------------------------+--------+

                    Table 3: Quota Exceeded event table

5.5.  Threshold reached Event types

   The following table shows the sub event types for the threshold
   reached event.  The administrator can configure the thresholds and
   whenever the threshold is reached or exceeded, the corresponding
   events are generated.

   The address pool high threshold event will be reported when the
   address pool reaches a high water mark as defined by the operator.
   This will sever as an indication that the operator might have to add
   more addresses to the pool or an indication that the subsequent users
   may be denied NAT translation mappings.

   The address and port mapping high threshold event is generated, when
   the number of ports in the configured address pool has reached a
   configured threshold.

   The per-user address and port mapping high threshold is generated
   when a single user uses more address and port mapping than a
   configured threshold.

   +---------------------------------------------------------+--------+
   |              Threshold Exceeded Event Name              | Values |
   +---------------------------------------------------------+--------+
   |            Address pool high threshold event            |      1 |
   |             Address pool low threshold event            |      2 |
   |      Address and port mapping high threshold event      |      3 |
   |  Address and port mapping per user high threshold event |      4 |
   |       Global Address mapping high threshold event       |      5 |
   +---------------------------------------------------------+--------+

                      Table 4: Threshold event table

5.6.  Templates for NAT Events

   The following is the template of events that will have to logged.
                                                ^^^^^^^^^^^^^^^^^^^

SD: I think this is a nit, but the sentence is garbled. "will be logged"?

   The events below are identified at the time of this writing but the
   events are expandable.  Depending on the implementation and
   ^^^^^^^^^^^^^^^^^^^^^
SD: this is a nit, but "set of events is extensible", I think.

[Senthil] Agree. (to both comments).


   configuration various IE's specified can be included or ignored.

5.6.1.  NAT44 create and delete session events

   These events will be generated when a NAT44 session is created or
   deleted.  The template will be the same, the natEvent will indicate
   whether it is a create or a delete event.  The following is a
   template of the event.

   The destination address and port information is optional as required
   by [RFC6888].  However, when the destination information is
   suppressed, the session log event contains the same information as
   the BIB event.  In such cases, the NAT device SHOULD NOT send both
   BIB and session events.

      +----------------------------------+-------------+-----------+
      |            Field Name            | Size (bits) | Mandatory |
      +----------------------------------+-------------+-----------+
      |            timeStamp             |          64 |    Yes    |
      |          natInstanceID           |          32 |     No    |
      |       vlanID/ingressVRFID        |          32 |     No    |
      |        sourceIPv4Address         |          32 |    Yes    |
      |     postNATSourceIPv4Address     |          32 |    Yes    |
      |        protocolIdentifier        |           8 |    Yes    |
      |       sourceTransportPort        |          16 |    Yes    |
      |   postNAPTsourceTransportPort    |          16 |    Yes    |
      |      destinationIPv4Address      |          32 |     No    |
      |  postNATDestinationIPv4Address   |          32 |     No    |
      |     destinationTransportPort     |          16 |     No    |
      | postNAPTdestinationTransportPort |          16 |     No    |
      |       internalAddressRealm       |           8 |     No    |
      |       externalAddressRealm       |           8 |     No    |
      |             natEvent             |           8 |    Yes    |
      +----------------------------------+-------------+-----------+

               Table 5: NAT44 Session delete/create template

5.6.2.  NAT64 create and delete session events

   These events will be generated when a NAT64 session is created or
   deleted.  The following is a template of the event.

      +----------------------------------+-------------+-----------+
      |            Field Name            | Size (bits) | Mandatory |
      +----------------------------------+-------------+-----------+
      |            timeStamp             |          64 |    Yes    |
      |          natInstanceID           |          32 |     No    |
      |       vlanID/ingressVRFID        |          32 |     No    |
      |        sourceIPv6Address         |         128 |    Yes    |
      |     postNATSourceIPv4Address     |          32 |    Yes    |
      |        protocolIdentifier        |           8 |    Yes    |
      |       sourceTransportPort        |          16 |    Yes    |
      |   postNAPTsourceTransportPort    |          16 |    Yes    |
      |      destinationIPv6Address      |         128 |     No    |
      |  postNATDestinationIPv4Address   |          32 |     No    |
      |     destinationTransportPort     |          16 |     No    |
      | postNAPTdestinationTransportPort |          16 |     No    |
      |       internalAddressRealm       |           8 |     No    |
      |       externalAddressRealm       |           8 |     No    |
      |             natEvent             |           8 |    Yes    |
      +----------------------------------+-------------+-----------+

            Table 6: NAT64 session create/delete event template

5.6.3.  NAT44 BIB create and delete events

   These events will be generated when a NAT44 Bind entry is created or
   deleted.  The following is a template of the event.

         +-----------------------------+-------------+-----------+
         |          Field Name         | Size (bits) | Mandatory |
         +-----------------------------+-------------+-----------+
         |          timeStamp          |          64 |    Yes    |
         |        natInstanceID        |          32 |     No    |
         |     vlanID/ingressVRFID     |          32 |     No    |
         |      sourceIPv4Address      |          32 |    Yes    |
         |   postNATSourceIPv4Address  |          32 |    Yes    |
         |      protocolIdentifier     |           8 |     No    |
         |     sourceTransportPort     |          16 |     No    |
         | postNAPTsourceTransportPort |          16 |     No    |
         |     internalAddressRealm    |           8 |     No    |
         |     externalAddressRealm    |           8 |     No    |
         |           natEvent          |           8 |    Yes    |
         +-----------------------------+-------------+-----------+

              Table 7: NAT44 BIB create/delete event template

5.6.4.  NAT64 BIB create and delete events

   These events will be generated when a NAT64 Bind entry is created or
   deleted.  The following is a template of the event.

         +-----------------------------+-------------+-----------+
         |          Field Name         | Size (bits) | Mandatory |
         +-----------------------------+-------------+-----------+
         |          timeStamp          |          64 |    Yes    |
         |        natInstanceID        |          32 |     No    |
         |     vlanID/ingressVRFID     |          32 |     No    |
         |      sourceIPv6Address      |         128 |    Yes    |
         |   postNATSourceIPv4Address  |          32 |    Yes    |
         |      protocolIdentifier     |           8 |     No    |
         |     sourceTransportPort     |          16 |     No    |
         | postNAPTsourceTransportPort |          16 |     No    |
         |     internalAddressRealm    |           8 |     No    |
         |     externalAddressRealm    |           8 |     No    |
         |           natEvent          |           8 |    Yes    |
         +-----------------------------+-------------+-----------+

              Table 8: NAT64 BIB create/delete event template

5.6.5.  Addresses Exhausted event

   This event will be generated when a NAT device runs out of global
   IPv4 addresses in a given pool of addresses.  Typically, this event
   would mean that the NAT device wont be able to create any new
                                  ^^^^
SD: "won't"

[Senthil] Ok.


   translations until some addresses/ports are freed.  This event SHOULD
   be rate limited as many packets hitting the device at the same time
   will trigger a burst of addresses exhausted events.

   The following is a template of the event.  Note that either the NAT
   pool name or the nat pool identifier should be logged, but not both.

SD: I lack understanding, but I didn't see anything that looked like a NAT pool name in the template. Did I miss something?

[Senthil] We decided not to use a string like a pool name instead use a poolID, which is a unique identifier for each pool name. The reason being that the logs could become fairly large
If we have to carry the names and some of the NAT engines implement this in the hardware that lacks the string processing capability.


                +---------------+-------------+-----------+
                |   Field Name  | Size (bits) | Mandatory |
                +---------------+-------------+-----------+
                |   timeStamp   |          64 |    Yes    |
                | natInstanceID |          32 |     No    |
                |    natEvent   |           8 |    Yes    |
                |   natPoolID   |          32 |    Yes    |
                +---------------+-------------+-----------+

                 Table 9: Address Exhausted event template

5.6.6.  Ports Exhausted event

   This event will be generated when a NAT device runs out of ports for
   a global IPv4 address.  Port exhaustion shall be reported per
   protocol (UDP, TCP etc).  This event SHOULD be rate limited as many
   packets hitting the device at the same time will trigger a burst of
   port exhausted events.

   The following is a template of the event.

          +--------------------------+-------------+-----------+
          |        Field Name        | Size (bits) | Mandatory |
          +--------------------------+-------------+-----------+
          |        timeStamp         |          64 |    Yes    |
          |      natInstanceID       |          32 |     No    |
          |         natEvent         |           8 |    Yes    |
          | postNATSourceIPv4Address |          32 |    Yes    |
          |    protocolIdentifier    |           8 |    Yes    |
          +--------------------------+-------------+-----------+

                 Table 10: Ports Exhausted event template

5.6.7.  Quota exceeded events

   This event will be generated when a NAT device cannot allocate
   resources as a result of an administratively defined policy.  The
   quota exceeded event templates are described below
                                                     ^
SD: missing period
[Senthil] Ok.


5.6.7.1.  Maximum session entries exceeded

   The maximum session entries exceeded is generated when the
   administratively configured limit is reached.  The following is the
   template of the event.

               +-----------------+-------------+-----------+
               |    Field Name   | Size (bits) | Mandatory |
               +-----------------+-------------+-----------+
               |    timeStamp    |          64 |    Yes    |
               |  natInstanceID  |          32 |     No    |
               |     natEvent    |           8 |    Yes    |
               |  natLimitEvent  |          32 |    Yes    |
               | configuredLimit |          32 |    Yes    |
               +-----------------+-------------+-----------+

             Table 11: Session Entries Exceeded event template

5.6.7.2.  Maximum BIB entries exceeded

   The maximum BIB entries exceeded is generated when the
   administratively configured limit is reached.  The following is the
   template of the event.

               +-----------------+-------------+-----------+
               |    Field Name   | Size (bits) | Mandatory |
               +-----------------+-------------+-----------+
               |    timeStamp    |          64 |    Yes    |
               |  natInstanceID  |          32 |     No    |
               |     natEvent    |           8 |    Yes    |
               |  natLimitEvent  |          32 |    Yes    |
               | configuredLimit |          32 |    Yes    |
               +-----------------+-------------+-----------+

               Table 12: BIB Entries Exceeded event template

5.6.7.3.  Maximum entries per user exceeded

   This event is generated when a single user reaches the
   administratively configured limit.  The following is the template of
   the event.

           +---------------------+-------------+---------------+
           |      Field Name     | Size (bits) |   Mandatory   |
           +---------------------+-------------+---------------+
           |      timeStamp      |          64 |      Yes      |
           |    natInstanceID    |          32 |       No      |
           |       natEvent      |           8 |      Yes      |
           |    natLimitEvent    |          32 |      Yes      |
           |   configuredLimit   |          32 |      Yes      |
           | vlanID/ingressVRFID |          32 |       No      |
           |  sourceIPv4 address |          32 | Yes for NAT44 |
           |  sourceIPv6 address |         128 | Yes for NAT64 |
           +---------------------+-------------+---------------+

            Table 13: Per-user Entries Exceeded event template

5.6.7.4.  Maximum active host or subscribers exceeded

   This event is generated when the number of allowed hosts or
   subscribers reaches the administratively configured limit.  The
   following is the template of the event.

               +-----------------+-------------+-----------+
               |    Field Name   | Size (bits) | Mandatory |
               +-----------------+-------------+-----------+
               |    timeStamp    |          64 |    Yes    |
               |  natInstanceID  |          32 |     No    |
               |     natEvent    |           8 |    Yes    |
               |  natLimitEvent  |          32 |    Yes    |
               | configuredLimit |          32 |    Yes    |
               +-----------------+-------------+-----------+

        Table 14: Maximum hosts/subscribers Exceeded event template

5.6.7.5.  Maximum fragments pending reassembly exceeded

   This event is generated when the number of fragments pending
   reassembly reaches the administratively configured limit.  The
   following is the template of the event.

          +----------------------+-------------+---------------+
          |      Field Name      | Size (bits) |   Mandatory   |
          +----------------------+-------------+---------------+
          |      timeStamp       |          64 |      Yes      |
          |    natInstanceID     |          32 |       No      |
          |       natEvent       |           8 |      Yes      |
          |    natLimitEvent     |          32 |      Yes      |
          |   configuredLimit    |          32 |      Yes      |
          | internalAddressRealm |           8 |      Yes      |
          | vlanID/ingressVRFID  |          32 |       No      |
          |  sourceIPv4 address  |          32 | Yes for NAT44 |
          |  sourceIPv6 address  |         128 | Yes for NAT64 |
          +----------------------+-------------+---------------+

       Table 15: Maximum fragments pending reassembly Exceeded event
                                 template

5.6.8.  Threshold reached events

   This event will be generated when a NAT device reaches a operator
   configured threshold when allocating resources.  The threshold
   reached events are described in the section above.  The following is
   a template of the individual events.

5.6.8.1.  Address pool high or low threshold reached

   This event is generated when the high or low threshold is reached for
   the address pool.  The template is the same for both high and low
   threshold events

              +-------------------+-------------+-----------+
              |     Field Name    | Size (bits) | Mandatory |
              +-------------------+-------------+-----------+
              |     timeStamp     |          64 |    Yes    |
              |   natInstanceID   |          32 |     No    |
              |      natEvent     |           8 |    Yes    |
              | natThresholdEvent |          32 |    Yes    |
              |     natPoolID     |          32 |    Yes    |
              |  configuredLimit  |          32 |    Yes    |
              +-------------------+-------------+-----------+

     Table 16: Address pool high/low threshold reached event template

5.6.8.2.  Address and port high threshold reached

   This event is generated when the high threshold is reached for the
   address pool and ports.

              +-------------------+-------------+-----------+
              |     Field Name    | Size (bits) | Mandatory |
              +-------------------+-------------+-----------+
              |     timeStamp     |          64 |    Yes    |
              |   natInstanceID   |          32 |     No    |
              |      natEvent     |           8 |    Yes    |
              | natThresholdEvent |          32 |    Yes    |
              |  configuredLimit  |          32 |    Yes    |
              +-------------------+-------------+-----------+

       Table 17: Address port high threshold reached event template

5.6.8.3.  Per-user Address and port high threshold reached

   This event is generated when the high threshold is reached for the
   per-user address pool and ports.

           +---------------------+-------------+---------------+
           |      Field Name     | Size (bits) |   Mandatory   |
           +---------------------+-------------+---------------+
           |      timeStamp      |          64 |      Yes      |
           |    natInstanceID    |          32 |       No      |
           |       natEvent      |           8 |      Yes      |
           |  natThresholdEvent  |          32 |      Yes      |
           |   configuredLimit   |          32 |      Yes      |
           | vlanID/ingressVRFID |          32 |       No      |
           |  sourceIPv4 address |          32 | Yes for NAT44 |
           |  sourceIPv6 address |         128 | Yes for NAT64 |
           +---------------------+-------------+---------------+

   Table 18: Per-user Address port high threshold reached event template

5.6.8.4.  Global Address mapping high threshold reached

   This event is generated when the high is reached for the per-user
   address pool and ports.  This is generated only by NAT devices that
   use a address pooling behavior of paired.

             +---------------------+-------------+-----------+
             |      Field Name     | Size (bits) | Mandatory |
             +---------------------+-------------+-----------+
             |      timeStamp      |          64 |    Yes    |
             |    natInstanceID    |          32 |     No    |
             |       natEvent      |           8 |    Yes    |
             |  natThresholdEvent  |          32 |    Yes    |
             |   configuredLimit   |          32 |    Yes    |
             | vlanID/ingressVRFID |          32 |     No    |
             +---------------------+-------------+-----------+

       Table 19: Global Address mapping high threshold reached event
                                 template

5.6.9.  Address binding create and delete events

   These events will be generated when a NAT device binds a local
   address with a global address and when the global address is freed.
   This binding event happens when the first packet of the first flow
   from a host in the private realm.

     +--------------------------------+-------------+---------------+
     |           Field Name           | Size (bits) |   Mandatory   |
     +--------------------------------+-------------+---------------+
     |           timeStamp            |          64 |      Yes      |
     |         natInstanceID          |          32 |       No      |
     |            natEvent            |           8 |      Yes      |
     |       sourceIPv4 address       |          32 | Yes for NAT44 |
     |       sourceIPv6 address       |         128 | Yes for NAT64 |
     | Translated Source IPv4 Address |          32 |      Yes      |
     +--------------------------------+-------------+---------------+

                  Table 20: NAT Address Binding template

5.6.10.  Port block allocation and de-allocation

   This event will be generated when a NAT device allocates/de-allocates
   ports in a bulk fashion, as opposed to allocating a port on a per
   flow basis.

   portRangeStart represents the starting value of the range.

   portRangeEnd represents the ending value of the range.

   NAT devices would do this in order to reduce logs and potentially to
   limit the number of connections a subscriber is allowed to use.  In
   the following Port Block allocation template, the portRangeStart and
   portRangeEnd must be specified.


Sivakumar & Penno        Expires August 15, 2014               [Page 17]

Internet-Draft          IPFIX IEs for NAT logging          February 2014

   It is up to the implementation to choose to consolidate log records
   in case two consecutive port ranges for the same user are allocated
   or freed.

     +--------------------------------+-------------+---------------+
     |           Field Name           | Size (bits) |   Mandatory   |
     +--------------------------------+-------------+---------------+
     |           timeStamp            |          64 |      Yes      |
     |         natInstanceID          |          32 |       No      |
     |            natEvent            |           8 |      Yes      |
     |       sourceIPv4 address       |          32 | Yes for NAT44 |
     |       sourceIPv6 address       |         128 | Yes for NAT64 |
     | Translated Source IPv4 Address |          32 |      Yes      |
     |         portRangeStart         |          16 |      Yes      |
     |          portRangeEnd          |          16 |       No      |
     +--------------------------------+-------------+---------------+

            Table 21: NAT Port Block Allocation event template

6.  Encoding

6.1.  IPFIX

   This document uses IPFIX as the encoding mechanism to describe the
   logging of NAT events.  However, the information that should be
   logged SHOULD be the same irrespective of what kind of encoding
   scheme is used.  IPFIX is chosen because is it an IETF standard that
   meets all the needs for a reliable logging mechanism.  IPFIX provides
   the flexibility to the logging device to define the data sets that it
   is logging.  The IEs specified for logging MUST be the same
   irrespective of the encoding mechanism used.

7.  Acknowledgements

   Thanks to Dan Wing, Selvi Shanmugam, Mohamed Boucadir, Jacni Qin
   Ramji Vaithianathan, Simon Perreault, Jean-Francois Tremblay, Paul
   Aitken and Julia Renouard for their review and comments.

8.  IANA Considerations

   The following information elements are requested from IANA IPFIX
   registry.

   natInstanceId

   externalAddressRealm

   natLimitEvent

9.  Management Considerations

   This section considers requirements for management of the log system
   to support logging of the events described above.  It first covers
   requirements applicable to log management in general.  Any additional
   standardization required to fullfil these requirements is out of
   scope of the present document.  Some management considerations is
   covered in [I-D.behave-syslog-nat-logging].  This document covers the
   additional considerations.

9.1.  Ability to collect events from multiple NAT devices

   An IPFIX collector should be able to collect events from multiple NAT
   devices and be able to decipher events based on the sourceID in the
   IPFIX header.

9.2.  Ability to suppress events

   The exhaustion events can be overwhelming during traffic bursts and
   hence should be handled by the NAT devices to rate limit them before
   sending them to the collectors.  For eg. when the port exhaustion
   happens during bursty conditions, instead of sending a port
   exhaustion event for every packet, the exhaustion events should be
   rate limited by the NAT device.

10.  Security Considerations

   None.

11.  References

11.1.  Normative References

   [RFC2119]  Bradner, S., "Key words for use in RFCs to Indicate
              Requirement Levels", BCP 14, RFC 2119, March 1997.

   [RFC2663]  Srisuresh, P. and M. Holdrege, "IP Network Address
              Translator (NAT) Terminology and Considerations", RFC
              2663, August 1999.

   [RFC4787]  Audet, F. and C. Jennings, "Network Address Translation
              (NAT) Behavioral Requirements for Unicast UDP", BCP 127,
              RFC 4787, January 2007.

   [RFC5382]  Guha, S., Biswas, K., Ford, B., Sivakumar, S., and P.
              Srisuresh, "NAT Behavioral Requirements for TCP", BCP 142,
              RFC 5382, October 2008.

   [RFC6146]  Bagnulo, M., Matthews, P., and I. van Beijnum, "Stateful
              NAT64: Network Address and Protocol Translation from IPv6
              Clients to IPv4 Servers", RFC 6146, April 2011.

   [RFC6302]  Durand, A., Gashinsky, I., Lee, D., and S. Sheppard,
              "Logging Recommendations for Internet-Facing Servers", BCP
              162, RFC 6302, June 2011.

   [RFC6888]  Perreault, S., Yamagata, I., Miyakawa, S., Nakagawa, A.,
              and H. Ashida, "Common Requirements for Carrier-Grade NATs
              (CGNs)", BCP 127, RFC 6888, April 2013.

11.2.  Informative References

   [I-D.ietf-behave-syslog-nat-logging]
              Chen, Z., Zhou, C., Tsou, T., and T. Taylor, "Syslog
              Format for NAT Logging", draft-ietf-behave-syslog-nat-
              logging-06 (work in progress), January 2014.

   [IPFIX-IANA]
              IANA, "IPFIX Information Elements registry",
              <http://www.iana.org/assignments/ipfix><http://www.iana.org/assignments/ipfix>.

   [RFC5101bis]
              Claise, B. and B. Trammel, "Specification of the IP Flow
              Information eXport (IPFIX) Protocol for the Exchange of
              Flow Information", July 2013.

   [RFC5102bis]
              Claise, B. and B. Trammel, "Information Model for IP Flow
              Information eXport (IPFIX)", February 2013.

   [RFC5470]  Sadasivan, G., Brownlee, N., Claise, B., and J. Quittek,
              "Architecture for IP Flow Information Export", RFC 5470,
              March 2009.

Authors' Addresses

   Senthil Sivakumar
   Cisco Systems
   7100-8 Kit Creek Road
   Research Triangle Park, North Carolina  27709
   USA

   Phone: [phone]

   Renaldo Penno
   Cisco Systems
   170 W Tasman Drive
   San Jose, California  95035
   USA

   Email: [e-mail]<mailto:[e-mail]>






















Sivakumar & Penno        Expires August 15, 2014               [Page 21]