Re: SONET/SDH Encoding for LMP Test messages
Dimitri Papadimitriou <dpapadimitriou@psg.com> Fri, 26 September 2003 20:00 UTC
Envelope-to: ccamp-data@psg.com
Delivery-date: Fri, 26 Sep 2003 20:02:27 +0000
Subject: Re: SONET/SDH Encoding for LMP Test messages
To: Sidney.SHIBA@fnc.fujitsu.com
Date: Fri, 26 Sep 2003 20:00:45 +0000
Cc: ccamp@ops.ietf.org
MIME-Version: 1.0
Content-Type: text/plain; charset="us-ascii"
Content-Transfer-Encoding: 7bit
Message-Id: <E1A2ylh-000Mw8-Hz@psg.com>
From: Dimitri Papadimitriou <dpapadimitriou@psg.com>
hi, the Trace Message field value of the TRACE object used in the Test message (and that is sent over the control channel) corresponds to the Jx pattern being sent in-band, The Trace Message value is assumed to be available at the transmitter side before the Test message is sent - thanks, dimitri. > Dimitri, > > Reading the "draft-ietf-ccamp-lmp-test-sonet-sdh-03.txt" I had the > impression that Jx Trace messages MUST be provisioned prior to > link verification process can take place as described in this document. > Is this assumption correct? > > Thanks, > > Sidney Shiba > Fujitsu Network Communications > 2801 Telecom Parkway > Richardson, TX 75082 > > > > >
- Re: SONET/SDH Encoding for LMP Test messages Dimitri Papadimitriou
- RE: SONET/SDH Encoding for LMP Test messages Shiba, Sidney
- Re: SONET/SDH Encoding for LMP Test messages Dimitri Papadimitriou
- SONET/SDH Encoding for LMP Test messages Shiba, Sidney